An experimental study on occurrence of intermediate peaks in ice load signals
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study is to analyze the relationship between the occurrence of intermediate peak and time duration, and to conduct a review for the causes of the intermediate peak. In this test, ice impact tests were conducted using a bow side shell frame and ice specimen. A total of 70 samples were manufactured. Two types of ice specimen with relatively different surface conditions were used. The criterion for dividing the two types of ice specimen was the different exposure times to room temperature after freezing. This experiment was conducted for each parameter in order to reproduce the actual icebreaking situation. As a result of the analysis, the intermediate peak in the ice load signal have been found to be caused by mechanisms by which the inner surface of broken ice contact with hull immediately after the initial hitting point of ice has been broken.
Abstract
The purpose of this study is to analyze the relationship between the occurrence of intermediate peak and time duration, and to conduct a review for the causes of the intermediate peak. In this test, ice impact tests were conducted using a bow side shell frame and ice specimen. A total of 70 samples were manufactured. Two types of ice specimen with relatively different surface conditions were used. The criterion for dividing the two types of ice specimen was the different exposure times to room temperature after freezing. This experiment was conducted for each parameter in order to reproduce the actual icebreaking situation. As a result of the analysis, the intermediate peak in the ice load signal have been found to be caused by mechanisms by which the inner surface of broken ice contact with hull immediately after the initial hitting point of ice has been broken.
참고문헌 (13)
- ABS, "Guide for Ice Load Monitoring System", American Bureau of Shipping, ~ (2011)
- Ahn, S. J., "An Analysis on Strain Gauge Signal Measured from Repetitive Ramming in Heavy Ice Condition", The Twenty-Fourth (2017) Port and Ocean Engineering under Arctic Conditions (2017)
- Choi, K, "Ice Loads on Icebreaking Vessels" (2015), Munundang
- Hwang, M. R., "A study on ice-induced Fatigue of the ARAON", Proceeding of the 30th the Korean Society of Ocean Engineers Conference (2016)
- ISSC, "Committee V.6 Report", International Ship and Offshore Structures Congress (ISSC) (2012), Arctic Technology
- 전영주, "북극해에서의 쇄빙시 국부 빙하중 계측 신호에 대한 파형 분석", 한국항해항만학회지, 37(2), pp.143~148 (2013), 한국항해항만학회[DOI]
- Structural Challenges Faced by Arctic Ships, "Kendrick, A.", Ship Structure Committee, ~, pp.Ship Structure Committee Report No. SSC-461 (2011)
- 이탁기, "북극해 운항 중 계측된 빙하중에 대한 분석 연구", 대한조선학회 논문집, 51(2), pp.107~113 (2014), 대한조선학회
- 이민우, "빙해지역 일반 운항 및 쇄빙 운항 시의 빙하중 특성 비교 연구", 한국해양공학회지, 29(1), pp.28~33 (2015), 한국해양공학회
- 이종현, "Characteristics analysis of local ice load signals in ice-covered waters", International Journal of Naval Architecture and Ocean Engineering, 8(1), pp.66~72 (2016), 대한조선학회
- 임태욱, "일반 수조에서의 합성 얼음의 밀도변화에 따른 쇄빙선의 저항특성 연구", 한국해양공학회지, 22(5), pp.83~86 (2008), 한국해양공학회
- 민정기, "쇄빙연구선 아라온호의 북극해 실선 계측 전단변형데이터 분석을 통한 빙하중 산정 기법 고찰", 한국해양공학회지, 30(6), pp.468~473 (2016), 한국해양공학회
- "Icebreaker Dedicated to the North Pole Will Be Put into Service in 2020" (2015)[URL]