Application of AutoFom III equipment for prediction of primal and commercial cut weight of Korean pig carcasses
1
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
Objective: This study was conducted to enable on-line prediction of primal and commercial cut weights in Korean slaughter pigs by AutoFom III, which non-invasively scans pig carcasses early after slaughter using ultrasonic sensors. Methods: A total of 162 Landrace, Yorkshire, and Duroc (LYD) pigs and 154 LYD pigs representing the yearly Korean slaughter distribution were included in the calibration and validation dataset, respectively. Partial least squares (PLS) models were developed for prediction of the weight of deboned shoulder blade, shoulder picnic, belly, loin, and ham. In addition, AutoFom III´s ability to predict the weight of the commercial cuts of spare rib, jowl, false lean, back rib, diaphragm, and tenderloin was investigated. Each cut was manually prepared by local butchers and then recorded. Results: The cross-validated prediction accuracy (R2cv) of the calibration models for deboned shoulder blade, shoulder picnic, loin, belly, and ham ranged from 0.77 to 0.86. The R2cv for tenderloin, spare rib, diaphragm, false lean, jowl, and back rib ranged from 0.34 to 0.62. Because the R2cv of the latter commercial cuts were less than 0.65, AutoFom III was less accurate for the prediction of those cuts. The root mean squares error of cross validation calibration (RMSECV) model was comparable to the root mean squares error of prediction (RMSEP), although the RMSECV was numerically higher than RMSEP for the deboned shoulder blade and belly. Conclusion: AutoFom III predicts the weight of deboned shoulder blade, shoulder picnic, loin, belly, and ham with high accuracy, and is a suitable process analytical tool for sorting pork primals in Korea. However, AutoFom III's prediction of smaller commercial Korean cuts is less accurate, which may be attributed to the lack of anatomical reference points and the lack of a good correlation between the scanned area of the carcass and those traits.
Abstract
Objective: This study was conducted to enable on-line prediction of primal and commercial cut weights in Korean slaughter pigs by AutoFom III, which non-invasively scans pig carcasses early after slaughter using ultrasonic sensors. Methods: A total of 162 Landrace, Yorkshire, and Duroc (LYD) pigs and 154 LYD pigs representing the yearly Korean slaughter distribution were included in the calibration and validation dataset, respectively. Partial least squares (PLS) models were developed for prediction of the weight of deboned shoulder blade, shoulder picnic, belly, loin, and ham. In addition, AutoFom III´s ability to predict the weight of the commercial cuts of spare rib, jowl, false lean, back rib, diaphragm, and tenderloin was investigated. Each cut was manually prepared by local butchers and then recorded. Results: The cross-validated prediction accuracy (R2cv) of the calibration models for deboned shoulder blade, shoulder picnic, loin, belly, and ham ranged from 0.77 to 0.86. The R2cv for tenderloin, spare rib, diaphragm, false lean, jowl, and back rib ranged from 0.34 to 0.62. Because the R2cv of the latter commercial cuts were less than 0.65, AutoFom III was less accurate for the prediction of those cuts. The root mean squares error of cross validation calibration (RMSECV) model was comparable to the root mean squares error of prediction (RMSEP), although the RMSECV was numerically higher than RMSEP for the deboned shoulder blade and belly. Conclusion: AutoFom III predicts the weight of deboned shoulder blade, shoulder picnic, loin, belly, and ham with high accuracy, and is a suitable process analytical tool for sorting pork primals in Korea. However, AutoFom III's prediction of smaller commercial Korean cuts is less accurate, which may be attributed to the lack of anatomical reference points and the lack of a good correlation between the scanned area of the carcass and those traits.
참고문헌 (19)
- Key statistics of agriculture, livestock and food, "Ministry of Agriculture Food and Rural Affairs", Ministry of Agriculture, Food and Rural Affairs, ~, pp.Report No.: 11-1543000-000128-10 (2015)
- 2016 Animal products grading statistical yearbook, "Korea Institute for Animal Product Quality Evaluation", Korea Institute for Animal Product Quality Evaluation, ~, pp.Report No.: 11-B552679-000006-10 (2016)
- 오상현, "Pork Preference for Consumers in China, Japan and South Korea", Animal Bioscience, 25(1), pp.143~150 (2012), 아세아·태평양축산학회
- Font-i-Furnols M, "Consumer preference, behavior and perception about meat and meat products: an overview", Meat Sci, 98, pp.361~371 (2014)[DOI]
- Frank D, "Chapter 27-sensory perceptions and new consumer attitudes to meat;New aspects of meat quality", pp.667~698 (2017), Woodhead Publishing
- Scholz A, "Noninvasive methods for the determination of body and carcass composition in livestock: dual-energy X-ray absorptiometry, computed tomography, magnetic resonance imaging and ultrasound: invited review", Animal, 9, pp.1250~1264 (2015)[DOI]
- Font i Furnols M, "Estimation of lean meat content in pig carcasses using X-ray computed tomography and PLS regression", Chemometr Intell Lab Syst, 98, pp.31~37 (2009)[DOI]
- Fortin A, "A novel approach to grading pork carcasses: computer vision and ultrasound", Meat Sci, 63, pp.451~462 (2003)[DOI]
- Font i Furnols M, "Comparison of different devices for predicting the lean meat percentage of pig carcasses", Meat sci, 83, pp.443~446 (2009)[DOI]
- Pathak V, "Ultrasound as a modern tool for carcass evaluation and meat processing: a review", Int J Meat Sci, 1, pp.83~92 (2011)[DOI]
- Uttaro B, "Prediction of pork belly fatness from the intact primal cut", Food Control, 21, pp.1394~1401 (2010)[DOI]
- Brondum J, "On-line pork carcass grading with the Autofom ultrasound system", J Anim Sci, 76, pp.1859~1868 (1998)[DOI]
- Busk H, "Determination of lean meat in pig carcasses with the Autofom classification system", Meat Sci, 52, pp.307~314 (1999)[DOI]
- Fortin A, "Evaluation of three ultrasound instruments, CVT-2, UltraFom 300 and AutoFom for predicting salable meat yield and weight of lean in the primals of pork carcasses", Meat Sci, 68, pp.537~549 (2004)[DOI]
- Strzelecki J, "Precision of the lean meat content estimation with the automatic grading equipment Autofom on polish pig carcasses", Proceedings of the 44th international congress of meat science and technology, pp.950~951 (1998)
- Gispert M, "The AUTO FOM: new equipment of carcasses clasification approved for Spain", Eurocarne, pp.69~74 (2002)
- Lisiak D, "A new simple method for estimating the pork carcass mass of primal cuts and lean meat content of the carcass", Anim Prod Sci, 55, pp.1044~1050 (2015)[DOI]
- Otto G, "Comparison of different methods for determination of drip loss and their relationships to meat quality and carcass characteristics in pigs", Meat Sci, 68, pp.401~409 (2004)[DOI]
- Nissen PM, "The estimated accuracy of the EU reference dissection method for pig carcass classification", Meat Sci, 73, pp.22~28 (2006)[DOI]