본문 바로가기
KERD
논문

Comparison of pork belly characteristics and weights of primal cuts between gilt and barrow of Landrace × Yorkshire × Duroc pigs measured by AutoFomIII

2

조회

0

다운로드

3

인용

0

참고문헌

키워드

주제분류축산학

초록

Currently, pigs breed in Korea are LYD (Landrace × Yorkshire × Duroc) crossbred pigs. Pigs used as fresh meat are gilts and barrows. However, the current supply of pork is not satisfying Korean consumers. In addition, the comparison of carcasses between gilts and barrows only studies carcass weight, backfat thickness, or meat quality, and there are very few studies comparing carcass characteristics. The purpose of this study was to compare characteristics of 7 primal cuts of gilts and barrows as measured by AutoFom III. A total of 350,179 pigs were used, including 176,461 gilts and 173,718 barrows. Characteristics of seven primal cuts were measured using AutoFom III. In the case of carcass weight, there was no significant difference in grade 1+. For all other survey items except for grade 2, gilts showed significantly (p < 0.05) higher values. For all grades except for pork belly, amounts of the remaining six primal cuts were higher in gilts (all p < 0.05,). In addition, the ratio of intermuscular fat in the pork belly of barrows showed a higher value than that in the pork belly of gilts (p < 0.05). The amount of pork belly, which is the most popular among consumers in Korea, not only produced more production than gilts in barrows, but also showed a higher value than gilts in barrows for the ratio of intermuscular fat affecting taste. In summary, gilts produced higher yields than barrows in all parts except pork belly. For the production of only pork belly, barrows showed higher production than gilts.

Abstract

Currently, pigs breed in Korea are LYD (Landrace × Yorkshire × Duroc) crossbred pigs. Pigs used as fresh meat are gilts and barrows. However, the current supply of pork is not satisfying Korean consumers. In addition, the comparison of carcasses between gilts and barrows only studies carcass weight, backfat thickness, or meat quality, and there are very few studies comparing carcass characteristics. The purpose of this study was to compare characteristics of 7 primal cuts of gilts and barrows as measured by AutoFom III. A total of 350,179 pigs were used, including 176,461 gilts and 173,718 barrows. Characteristics of seven primal cuts were measured using AutoFom III. In the case of carcass weight, there was no significant difference in grade 1+. For all other survey items except for grade 2, gilts showed significantly (p < 0.05) higher values. For all grades except for pork belly, amounts of the remaining six primal cuts were higher in gilts (all p < 0.05,). In addition, the ratio of intermuscular fat in the pork belly of barrows showed a higher value than that in the pork belly of gilts (p < 0.05). The amount of pork belly, which is the most popular among consumers in Korea, not only produced more production than gilts in barrows, but also showed a higher value than gilts in barrows for the ratio of intermuscular fat affecting taste. In summary, gilts produced higher yields than barrows in all parts except pork belly. For the production of only pork belly, barrows showed higher production than gilts.

참고문헌 (38)

  1. 조수현, "재래돼지의 출하체중별 도체수율 및 육질특성", 한국축산학회지, 49(4), pp.523~530 (2007), 한국축산학회
  2. Hong KC, "Effects of the mating system on fattening performance and meat quality in commercial pigs", J Anim Sci Technol, 43, pp.139~148 (2001)
  3. Korean Society for the Study of Meat science, "Meat science" (2018), Sjprinting
  4. Font-i-Furnols M, "Attitudes and beliefs of consumers towards pig welfare and pork quality", IOP Conf Ser Earth Environ Sci, 333, pp.012002~ (2019)[DOI]
  5. Prunier A, "A review of the welfare consequences of surgical castration in piglets and the evaluation of non-surgical methods", Anim Welf, 15, pp.277~289 (2006)[DOI]
  6. 오상현, "Pork Preference for Consumers in China, Japan and South Korea", Animal Bioscience, 25(1), pp.143~150 (2012), 아세아·태평양축산학회
  7. 조지환, "Characteristics of pork belly consumption in South Korea and their health implication", 한국축산학회지, 57(6), pp.1~7 (2015), 한국축산학회[DOI]
  8. Fernandez X, "Influence of intramuscular fat content on the quality of pig meat - 2. Consumer acceptability of m. longissimus lumborum", Meat Sci, 53, pp.67~72 (1999)[DOI]
  9. Hausman GJ, "Intermuscular and intramuscular adipose tissues: bad vs. good adipose tissues", Adipocyte, 3, pp.242~255 (2014)[DOI]
  10. Hoa Van Ba, "Meat quality characteristics of pork bellies in relation to fat level", Animal Bioscience, 34(10), pp.1663~1673 (2021), 아세아·태평양축산학회[DOI]
  11. 박윤환, "Correlation between the Korean pork grade system and the amount of pork primal cut estimated with AutoFom III", 한국축산학회지, 64(1), pp.135~142 (2022), 한국축산학회
  12. "MAFRA", 2019, Report No.: 11-1543000-000261-10
  13. "KAPE", 2019, Report No.: 11-B552679-000006-10
  14. Janiszewski P, "Prediction of primal cuts by using an automatic ultrasonic device as a new method for estimating a pig-carcass slaughter and commercial value", Anim Prod Sci, 59, pp.1183~1189 (2019)[DOI]
  15. 최정석, "Application of AutoFom III equipment for prediction of primal and commercial cut weight of Korean pig carcasses", Animal Bioscience, 31(10), pp.1670~1676 (2018), 아세아·태평양축산학회[DOI]
  16. Kim J, "Economic analysis of the use of vcs2000 for pork carcass meat yield grading in Korea", Animals, 11, pp.1297~ (2021)[DOI]
  17. Kim JS, "Consideration of big data utilization and related technologies", J Korea Contents Assoc, 10, pp.34~40 (2012)
  18. Boler DD, "Effects of immunological castration(Improvest)on changes in dressing percentage and carcass characteristics of finishing pigs", J Anim Sci, 92, pp.359~368 (2014)[DOI]
  19. Kline RB, "Principles and practice of structural equation modeling" (2015), Guilford Publications
  20. Larzul C, "Phenotypic and genetic parameters for longissimus muscle fiber characteristics in relation to growth, carcass, and meat quality traits in large white pigs", J Anim Sci, 75, pp.3126~3137 (1997)[DOI]
  21. 김계웅, "돼지의 도체중과 등지방 두께에 따른 도체등급 및 도체특성", 한국축산식품학회지, 26(2), pp.183~188 (2006), 한국축산식품학회
  22. Kress K, "Carcass characteristics and primal pork cuts of gilts, boars, immunocastrates and barrows using AutoFOM III data of a commercial abattoir", Animals, 10, pp.1912~ (2020)[DOI]
  23. Claus R, "Endocrine regulation of growth and metabolism in the pig : a review", Livest Prod Sci, 37, pp.245~260 (1994)[DOI]
  24. Tanghe S, "Effect of sex and sire on lean meat percentage and weight of primal cuts of pork using Autofom data", Book of abstracts of the 66th Annual Meeting of the European Federation of Animal Science, pp.166~ (2015), Wagening Academic
  25. Poulsen Nautrup B, "The effect of immunization against gonadotropin-releasing factor on growth performance, carcass characteristics and boar taint relevant to pig producers and the pork packing industry : a meta-analysis", Res Vet Sci, 119, pp.182~195 (2018)[DOI]
  26. Kim H, "Shape and characteristics of Korean’s favorite pork belly", Food Sci Anim Resour Ind, 4, pp.30~44 (2015)
  27. Walstra P., "Growth and carcass composition from birth to maturity in relation to feeding level and sex in Dutch Landrace pigs", Ph.D., pp.1980
  28. Correa JA, "Effects of slaughter weight on carcass composition and meat quality in pigs of two different growth rates", Meat Sci, 72, pp.91~99 (2006)[DOI]
  29. Fredeen HT, "Yields and dimensions of pork bellies in relation to carcass measurements", J Anim Sci, 51, pp.59~68 (1980)[DOI]
  30. Christoffersen BO, "Influence of castrationinduced testosterone and estradiol deficiency on obesity and glucose metabolism in male Göttingen minipigs", Steroids, 75, pp.676~684 (2010)[DOI]
  31. Escobar-Morreale HF, "The striking similarities in the metabolic associations of female androgen excess and male androgen deficiency", Hum Reprod, 29, pp.2083~2091 (2014)[DOI]
  32. Newcom DW, "Genetic parameters for pork carcass components", J Anim Sci, 80, pp.3099~3106 (2002)[DOI]
  33. Soladoye PO, "Pork belly quality, bacon properties and recent consumer trends", Can J Anim Sci, 95, pp.325~340 (2015)[DOI]
  34. (2022)[URL]
  35. "A Study on the improvement of pork quality using the automatic classification mechanical determination system (Autofom III)" (2021)[URL]
  36. Damian Frank, "Consumer Acceptability of Intramuscular Fat", 한국축산식품학회지, 36(6), pp.699~708 (2016), 한국축산식품학회
  37. Brøndum J, "On-line pork carcass grading with the Autofom ultrasound system", J Anim Sci, 76, pp.1859~1868 (1998)[DOI]
  38. "Food and Rural Affairs Notification 2014-4" (2014)[URL]

관련 논문AI추천

Correlation analysis of primal cuts weight, fat contents, and auction prices in Landrace × Yorkshire × Duroc (LYD) pig carcasses by VCS2000박윤환, 서종태, 임영호, 최종석, Gwantae Kim, Jaesik Lee, Jaeyoung Kim한국축산학회 · 한국축산학회지2024 · 제66권 제4호Correlation between the Korean pork grade system and the amount of pork primal cut estimated with AutoFom III김윤아, 박상훈, 박윤환, Changhyun Woo, Eun Young Ko, Gyutae Park, Jaeyoung Kim, Jungseok Choi, Kwangwook Park, Sanghun Lee,한국축산학회 · 한국축산학회지2022 · 제64권 제1호Application of AutoFom III equipment for prediction of primal and commercial cut weight of Korean pig carcasses이재준, 최양일, 최정석, Jang Uk Jeong, Ki Mun Kwon, Kyung Ok Lee, Sang Keun Jin, Young Kyu Lee아세아·태평양축산학회 · Animal Bioscience2018 · 제31권 제10호제주재래돼지와 Landrace 교잡돈의 도체 및 부분육 생산특성강근호, 강선문, 박경미, 박범영, 서수영, 성필남, 조수현, 조인철, Van Ba Hoa동물생명과학연구소 · 동물자원연구2014 · 제25권 제1호Breeding potential for pork belly to the novel economic trait김준모, Seung-Hoon Lee한국축산학회 · 한국축산학회지2023 · 제65권 제1호Carcass trait, meat yield and quality characteristics of recentlysynthesized Woori Heukdon and commercial LYD pigs under identical rearing condition설국환, 송동헌, Cho Soo-Hyun, Hoa Van Ba, Kang Sun-Moon, Kim Hyun-Wook, Min Ye-Jin, Moon Sung-Sil아세아·태평양축산학회 · Animal Bioscience2023 · 제36권 제6호

이 간행물의 다른 논문 (14건)