Developing Al2O3-TiC in-situ nanocomposite by SHS and analyzingtheeffects of Al content and mechanical activation on microstructure
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Al2O3-TiC in-situ nanocomposite was developed by self propagating high temperature synthesis (SHS) process using TiO2, Al and C powders as starting materials. The effects of mechanical activation and Al content on the reaction mechanisms and microstructures of products were investigated and thermodynamic and kinetic aspects of reactions were evaluated. Samples were characterized by X-Ray diffraction (XRD), scanning electron microscopy, (SEM)and Energy Dispersive Spectroscopy (EDS). According to the findings,increasing Al content of reactants led to enhancing the heat transfer and avoiding heat outlet by omitting CO as gas product. Also,mechanical activation resulted in better distribution of the initial materials, a decrease inthe diffusion distance, and in better kinetics of the combustion synthesis reaction at lower temperature. Consequently, ceramic matrix nanocomposites (CMNC) with phase size less than 800 nm and crystalline size less than 65 nm were developed.
Abstract
Al2O3-TiC in-situ nanocomposite was developed by self propagating high temperature synthesis (SHS) process using TiO2, Al and C powders as starting materials. The effects of mechanical activation and Al content on the reaction mechanisms and microstructures of products were investigated and thermodynamic and kinetic aspects of reactions were evaluated. Samples were characterized by X-Ray diffraction (XRD), scanning electron microscopy, (SEM)and Energy Dispersive Spectroscopy (EDS). According to the findings,increasing Al content of reactants led to enhancing the heat transfer and avoiding heat outlet by omitting CO as gas product. Also,mechanical activation resulted in better distribution of the initial materials, a decrease inthe diffusion distance, and in better kinetics of the combustion synthesis reaction at lower temperature. Consequently, ceramic matrix nanocomposites (CMNC) with phase size less than 800 nm and crystalline size less than 65 nm were developed.
참고문헌 (31)
- B. John, "Structural Ceramics" (1989), Academic Press
- C.B. Carter, "Ceramic Materials" (2007), Science and Engineering
- D. Jianxin, , J. Ceram. Int, 31, pp.249~256 (2005)
- S. Rattanachan, , J. Eur. Ceram. Soc, 23, pp.1269~1276 (2003)
- D.Jianxin, , J. Eur. Ceram. Soc, 26, pp.1317~1323 (2006)
- B.Liu, , Journal of Materials Science and Engineering A, 460, pp.146~148 (2007)
- L.P. Huang, , Journal of Composites Part A, 30, pp.615~618 (1999)
- A.G. Evans, , Journal of Materials Science and Engineering, 71, pp.3~21 (1985)
- R.W. Rice, , Journal of Physics and Chemistry of Solids, 45, pp.1033~1050 (1984)
- R. Rice, , Journal of Material Science, 19, pp.1267~1271 (1984)
- J.J. Mechosks, "Fracture mechanics of ceramics", pp.165~ (1983), Plenum
- K. Niihara, , Journal of Ceramic Society of Japan, 99, pp.974~982 (1991)
- M. Cain, , Journal of Applied Organometallic Chemistry, 15, pp.321~330 (2001)
- V. Viswanathan, , Journal of Materials Science and Engineering, R54, pp.121~285 (2006)
- R. Gadow, , Journal of Materials Science and Engineering, B148, pp.58~64 (2008)
- E.M.Sharifi, , Journal of Alloys and Compounds, 491, pp.411~415 (2010)
- T.D. Xia, , Journal of Materials Science, 36, pp.5581~5584 (2001)
- . Zhang, , J. Eur. Ceram. Soc, 26, pp.3393~3397 (2006)
- N. Liu, , International Journal of Refractory Metals & Hard Materials, 22, pp.265~269 (2004)
- J.H. Lee, , Materials Research Bulletin, 35, pp.945~954 (2000)
- Y. Yang, , Name of Journal Materials letters, 61, pp.671~676 (2007)
- J.W. McCauley, "An Historical and Technical Perspective on SHS", The 14th Annual Conference on Composites and Advanced Ceramic Materials, 11, pp.1137~1181 (1990)
- K. Williamson, , Journal of ActaMetallurgica, 1, pp.22~31 (1953)
- D.R. Gaskell, "Introduction to Thermodynamic of Materials" (1995)
- L.P. Wang, , Journal of Materials Science and Engineering A, 336, pp.75~80 (2002)
- R.P. Liu, , Journal of Metallurgical and Materials Transaction A, 35, pp.1067~1073 (2004)
- Z. Amjad, , NACE-International Corrosion Conference Series, pp.63851~ (2006)
- J.C. Roio, , Journal of Crystal Growth, 183, pp.604~613 (1998)
- P. Pourghahramani, , Phd, pp.2007
- C. Gras, , Journal of Alloys and Compounds, 314, pp.240~250 (2001)
- L. Jianlin, , Journal of Materials Processing Technology, 147, pp.236~240 (2004)