Tailoring the microstructure of Al2O3-SiO2 porous ceramics through starch consolidation by direct foaming
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study reports the tailoring of the microstructure of porous ceramics from particle stabilized colloidal suspension with theaddition of starch by direct foaming. The initial colloidal suspension of Al2O3-SiO2 was partially hydrophobized by surfactant,propyl gallate (2 wt.%) to stabilize wet foam with the addition of SiO2 as stabilizer. The influence of the starch consolidationand solid content on the bubble size, pore size and pore distribution in terms of the contact angle, surface tension, adsorptionfree energy and Laplace pressure are discussed in this paper. The results show the wet foam stability of more than 85%corresponds to a particles free energy of 2.6 × 10−12 J and pressure difference of 6.0 mPa for colloidal particles with 1.25 wt. % of starch content. The uniform distribution of tri-modal micro pores were controlled by increasing starch contents and thickstruts (films in wet foams), which led via higher stability wet foams to porous ceramics.
Abstract
This study reports the tailoring of the microstructure of porous ceramics from particle stabilized colloidal suspension with theaddition of starch by direct foaming. The initial colloidal suspension of Al2O3-SiO2 was partially hydrophobized by surfactant,propyl gallate (2 wt.%) to stabilize wet foam with the addition of SiO2 as stabilizer. The influence of the starch consolidationand solid content on the bubble size, pore size and pore distribution in terms of the contact angle, surface tension, adsorptionfree energy and Laplace pressure are discussed in this paper. The results show the wet foam stability of more than 85%corresponds to a particles free energy of 2.6 × 10−12 J and pressure difference of 6.0 mPa for colloidal particles with 1.25 wt. % of starch content. The uniform distribution of tri-modal micro pores were controlled by increasing starch contents and thickstruts (films in wet foams), which led via higher stability wet foams to porous ceramics.
참고문헌 (18)
- M. Scheffler, "Cellular Ceramics:Structure, Manufacturing, Properties and Applications", pp.645~ (2005), Wiley-VCH, Verlag GmbH & Co. KGaA
- N. Sarkar, , Ceramics International, pp.6306~6311 (2015)
- B.P. Binks, , Curr. Opin. Colloid Interface Sci, 7, pp.21~41 (2002)
- S. Bhaskar, , Journal of the Ceramic Society of Japan, 123(6), pp.1~5 (2015)
- B.S. Murray, , Curr. Opin. Colloid Interface Science, 12, pp.231~241 (2007)
- T.S. Horozov, , Curr. Opin. Colloid Interface Science, 13, pp.134~140 (2008)
- O. Lyckfeldt, , J. Eur. Ceram. Soc, 18, pp.131~140 (1998)
- T.N. Hunter, , Adv. Colloid Interface. Sci, 13(7), pp.57~81 (2008)
- P.J. Wilde, , Curr. Opin. Colloid Interface. Sci, 5, pp.176~181 (2000)
- N. Sarkar, , Ceramics International, 41, pp.4021~4027 (2015)
- U.T. Gonzenabach, , Langmuir, 10, pp.983~988 (2006)
- P. Sepulveda, , J. Eur. Ceram. Soc, 19, pp.2059~2066 (1999)
- S. Li, , Ceramics International, 39, pp.8833~8839 (2015)
- E. Gregorova, , J. Eur. Ceram. Soc, 27, pp.669~672 (2007)
- D.M.- Alguacil, , J. Colloid Interface Sci, 353, pp.512~518 (2011)
- N. Sarkar, , Journal of European Ceramic Society, 35, pp.3969~3976 (2015)
- X. Mao, , Ceramics International, 34, pp.107~112 (2008)
- M.H. Talou, , J. Eur. Ceram. Soc, 35, pp.1021~1030 (2015)