포토그래메트리와 3D 프린터를 활용한 특수분장 디지털 작업에 대한 가능성과 유용성
Possibility and Usability of Special Makeup Digital Jobs Using Photogrammetry and 3D Printer
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Photogrammetry is a technique to construct 3-D shape information based on 2D photos. Since it utilizes photo information, actual data on a subject are not provided. Therefore, it has disadvantages in measuring actual size. Even so, there has been a rising interest in the development of photogrammetry convergence technology in diverse fields. This study attempted to investigate the possibility and usefulness of the digital mode by applying 3D printing technology, which has led the Fourth Industrial Revolution while altering the paradigm of the latest technology, and photogrammetry to lifecasting in special makeup. The results found the following: First, it has been known that the construction of 3D shape information is impossible unless controllable indoor artificial lighting and tens of cameras are installed in advance, and a subject is photographed at the same time. With the smooth cooperation of the subject, the technique was able to get the desired results with just one camera. Second, human skin becomes shinier under lighting due to high moisture content and translucent epidermis. When photographing, lighting is essential so that it is important to reduce skin gloss with cosmetics and avoid direct lighting to get satisfying results. Third, to get measured data, it is needed to have actual information by attaching a non-glossy object whose dimensions are known to a subject or by photographing it along with the model. The created 3D data can be edited by a 3D modeling program, printed using a 3D printer and used in an embossed mold. They could also be available in anaplastology, which restores a body part that was lost due to illness, accident or inborn disability, using an artificial device as well as in special makeup. Digital work on special makeup has great growth potential, supporting continued technology development. Therefore, it is necessary to suggest future directions by performing related studies.
Abstract
Photogrammetry is a technique to construct 3-D shape information based on 2D photos. Since it utilizes photo information, actual data on a subject are not provided. Therefore, it has disadvantages in measuring actual size. Even so, there has been a rising interest in the development of photogrammetry convergence technology in diverse fields. This study attempted to investigate the possibility and usefulness of the digital mode by applying 3D printing technology, which has led the Fourth Industrial Revolution while altering the paradigm of the latest technology, and photogrammetry to lifecasting in special makeup. The results found the following: First, it has been known that the construction of 3D shape information is impossible unless controllable indoor artificial lighting and tens of cameras are installed in advance, and a subject is photographed at the same time. With the smooth cooperation of the subject, the technique was able to get the desired results with just one camera. Second, human skin becomes shinier under lighting due to high moisture content and translucent epidermis. When photographing, lighting is essential so that it is important to reduce skin gloss with cosmetics and avoid direct lighting to get satisfying results. Third, to get measured data, it is needed to have actual information by attaching a non-glossy object whose dimensions are known to a subject or by photographing it along with the model. The created 3D data can be edited by a 3D modeling program, printed using a 3D printer and used in an embossed mold. They could also be available in anaplastology, which restores a body part that was lost due to illness, accident or inborn disability, using an artificial device as well as in special makeup. Digital work on special makeup has great growth potential, supporting continued technology development. Therefore, it is necessary to suggest future directions by performing related studies.
참고문헌 (27)
- T. Debreceni, "Special makeup effects for stage and screen: Making and Applying Prosthetics", pp.10~11 (2009), Focal Press
- 황선희, "프로스테틱 특수분장 보형물제작이 신체손상인의 심리적 특성에 미치는 영향", 한국인체미용예술학회지, 18(4), pp.213~226 (2017), 한국인체미용예술학회
- 최경희, "프랙탈 기하학을 적용한 3D 프린팅 주얼리 디자인 특성", 패션 비즈니스, 21(5), pp.136~150 (2017), 한국패션비즈니스학회[DOI]
- 4차 산업과 3D프린팅 미래기술 트렌드-의료⋅3D바이오, "제조분야 융합모델", 건축물-, 지식산업정보원, pp.2018, 116~
- 정종완, "3D프린팅 기술로 인한 디자인 연관 산업 활성화 방안 연구", 디자인지식저널, (31), pp.43~52 (2014), 한국디자인지식학회[DOI]
- 박종식, "3차원 스캐너의 측정 조건을 고려한 3차원 형상 모델 획득에 관한 연구", 석사, pp.2008
- 이경미, "라인 레이저 기반 3차원 스캐너에서 투영을 이용한고속 3D 메쉬 생성", 한국정보통신학회논문지, 20(3), pp.513~518 (2016), 한국정보통신학회[DOI]
- 오준영, "홍성 신경리 마애여래입상의 3차원 기록화를 통한 포토그래메트리의 유용성 연구", 헤리티지:역사와 과학, 50(3), pp.30~43 (2017), 국립문화유산연구원
- 이병춘, "다시점 촬영법과 3D 스캐너를 이용한 3D 형상 재현 연구", 현대사진영상학회 논문집, 20(3), pp.53~65 (2017), 현대사진영상학회[DOI]
- 장가람, "원격 작업을 위한 3차원 점군 데이터기반의 실시간 폴리곤 생성 및 텍스처 맵핑 기법", 제어.로봇.시스템학회 논문지, 19(10), pp.928~935 (2013), 제어·로봇·시스템학회[DOI]
- 구자봉, "사진스캐닝 기술에 의한 매장문화재 기록방법에 대한 연구", 디지털콘텐츠학회논문지, 16(5), pp.835~847 (2015), 한국디지털콘텐츠학회[DOI]
- H. Edelsbrunner, "Three-dimensional alpha shapes", ACM Trans. on Graphics, 13(1), pp.43~72 (1994)
- F. Bernardini, "The ball-pivoting algorithm for surface reconstruction", IEEE Trans. on Visualization and Computer Graphics, 5(4), pp.349~359 (1999)
- 식품의약품안전평가원, "알기 쉬운 의료기기 3D프린팅 기술의 이해 Part Ⅱ. 3D프린팅 일반기초", pp.113~ (2018), 진한엠엔비
- 장민, "LSU를 이용한 SLA 방식의 3D프린터 설계 및 스캐닝 기구부 동작 테스트", 한국정보통신학회논문지, 21(6), pp.1225~1230 (2017), 한국정보통신학회[DOI]
- 이국희, "3D프린팅 서비스에 대한 사용자 경험 분석과 서비스 방향제안", 한국HCI학회 논문지, 11(1), pp.47~55 (2016), 한국에이치씨아이학회
- 고현정, "3D 프린팅의 기술, 미래를 바꿀3D 프린팅", pp.91~108 (2016), 정보문화사
- 노수황, "프린터 실무활용 가이드북", pp.122~159 (2016), 메카피아
- 이창조, "3D프린터 활성화를 위한 방안 -피규어 제작을 중심으로-", 디지털융복합연구, 12(9), pp.335~341 (2014), 한국디지털정책학회[DOI]
- 안찬제, "FDM방식 3D프린터를 활용한 제작 연구 - 지지대 중심으로 -", 영상문화콘텐츠연구, (14), pp.181~199 (2018), 영상문화콘텐츠연구원[DOI]
- 이준상, "드론 촬영 기반 사진 스캐닝 기술을 활용한 3D 모델링데이터생성방법에 관한 연구", 한국정보통신학회논문지, 22(6), pp.874~880 (2018), 한국정보통신학회[DOI]
- 문호석, "문화원형 디지털 복원기술 - 컴퓨터 그래픽스 및 영상처리를 활용한 시스템의 통합 기능을 중심으로", 한국IT서비스학회지, 8(4), pp.103~113 (2009), 한국IT서비스학회
- 이인수, "대상물표면에 따른 지상라이다 성능비교분석", 한국측량학회지 2008 춘계학술발표 논문집, pp.183~186 (2008)
- 엄대용, "대상물 표면물질에 따른 3차원 레이저스캐닝 시스템의 반사특성분석", 한국측량학회지, 27(3), pp.347~356 (2009), 한국측량학회
- ㈜비에이치쓰리디조형학원, "ZBrush와 3D 프린터 지브러시4R8-3D프린팅 피규어 제작", pp.502~ (2018), 시옷
- 방기정, "분장 전문가를 위한 3D 컴퓨터그래픽을 활용한 특수 분장의 효율성", 한국인체미용예술학회지, 18(1), pp.129~143 (2017), 한국인체미용예술학회
- 남기형, "CG 표현기법에 따른 분장분석 - 영화 ‘벤자민 버튼의 시간은 거꾸로 간다’를 중심으로 -", 한국인체미용예술학회지, 11(2), pp.75~86 (2010), 한국인체미용예술학회