컴퓨터 설계와 3D 프린팅을 이용한 안와부의 맞춤형 보형물 제작
Production of Customized Prosthesis of the Orbital Region, Using Computer Design and 3D Printing
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A facial defect can easily lead to psychological distress and social isolation due to its distinctive characteristics. Therefore, it is important to develop and appropriately offer personalized prostheses, even though the number of recipient may be limited. Since the manufacturing method for prostheses designed for stage or screen characters doesn't fundamentally differ from those personalized for everyday wear, special makeup artists can make a contribution to society as personalized prosthesis workers. This study aimed to investigate the manufacturing process for customized orbital prostheses, which can be produced and provided by special makeup artists, utilizing a digital approach. These prostheses target to address facial defects not covered by health insurance. Unlike traditional methods, this study adopted computer design and 3D printing technologies in restoring and making the prosthesis, ensuring that the results remain consistent regardless of a worker’s skill level. A customized orbital prosthesis may be prone to breakage due to its thinness at the center, and it is mot breathable because it is made of silicone rubber. This study proposed a method to reinforce the silicone to prevent easy breakage by using a reinforcing material and to address sweating by drilling a hole in the mold. The anticipated results are expected to serve as foundational data for developing a training manual aimed at educating personalized prosthesis workers.
Abstract
A facial defect can easily lead to psychological distress and social isolation due to its distinctive characteristics. Therefore, it is important to develop and appropriately offer personalized prostheses, even though the number of recipient may be limited. Since the manufacturing method for prostheses designed for stage or screen characters doesn't fundamentally differ from those personalized for everyday wear, special makeup artists can make a contribution to society as personalized prosthesis workers. This study aimed to investigate the manufacturing process for customized orbital prostheses, which can be produced and provided by special makeup artists, utilizing a digital approach. These prostheses target to address facial defects not covered by health insurance. Unlike traditional methods, this study adopted computer design and 3D printing technologies in restoring and making the prosthesis, ensuring that the results remain consistent regardless of a worker’s skill level. A customized orbital prosthesis may be prone to breakage due to its thinness at the center, and it is mot breathable because it is made of silicone rubber. This study proposed a method to reinforce the silicone to prevent easy breakage by using a reinforcing material and to address sweating by drilling a hole in the mold. The anticipated results are expected to serve as foundational data for developing a training manual aimed at educating personalized prosthesis workers.
참고문헌 (41)
- 김현연, "의안 장기착용자에서의 의안 관리", 대한안과학회지, 60(3), pp.217~222 (2019)
- 손우영, "한국인안와 악성종양 환자에서 안와내용적출술 후임상 결과", 대한안과학회지, 62(10), pp.1333~1339 (2021)
- 이선주, "안와내용제거술 후 유리피판을 이용한 안와재건술", 대한안과학회지, 44(3), pp.542~549 (2003)
- 황선희, "프로스테틱 특수분장 보형물제작이 신체손상인의 심리적 특성에 미치는 영향", 한국인체미용예술학회지, 18(4), pp.213~226 (2017)
- T. Debreceni, "Special makeup effects for stage and screen－Making and applying prosthetics", pp.10~ (2009), Focal Press
- 민승기, "악안면 보철의 임상적 고찰", 대한악안면성형재건외과학회지, 23(5), pp.406~414 (2001)
- 이희경, "치과기공의 악안면 보철분야도입을 위한 이론적 고찰", 대한치과기공학회지, 29(2), pp.105~117 (2007)
- A. Nuseir, "Direct 3D printing of flexible nasal prosthesis－Optimized digital workflow from scan to fit", Journal of Prosthodontics, 28(1), pp.10~14 (2019)
- S. Raghuvanshi, "Nonimplant, nonadhesive overlay approach to retain a partial auricular prosthesis", Journal of Prosthodontics, 28(2), pp.826~829 (2019)
- N. B. Jamayet, "Silicon orbital prosthesis－A clinical report", International Medical Journal, 21(3), pp.304~306 (2014)
- M. C. Goiato, "Care and cleaning of maxillofacial prostheses", The Journal of Craniofacial Surgery, 21(4), pp.1270~1273 (2010)
- 김학균, "골 부착형 악안면 보철물을 이용한 외이의 재건－증례보고 및 문헌고찰", 대한구강악안면외과학회지, 26(1), pp.93~96 (2000)
- 정상기, "안와내용물제거술후의 간편한 미용적교정에 대한 증례보고", 대한안과학회지, 38(6), pp.1084~1087 (1997)
- 신상완, "골유착성 임프란트를 이용한 악안면 보철분야에 이용되는 attachments", 대한치과의사협회지, 32(4), pp.244~250 (1994)
- 한남수, "에피테제를 이용한 인공이개 재건 2예", 대한이비인후-두경부외과학회지, 52(12), pp.991~995 (2009)
- T. Takeshi, "Maxillofacial & body rehabilitation 2", The International J Dental Technology, 35(7), pp.912~916 (2007)
- 장영준, "의료용폴리머 소재를 활용한 3D 프린팅 인공치아용사면체 비정질 카본 코팅 기술 연구", 한국트라이볼로지학회지, 38(6), pp.255~260 (2022)
- 윤승욱, "3D 얼굴 복원 기술 분석 및 연구동향", 전자통신동향분석, 27(3), pp.12~21 (2012)
- 김숭현, "포토그래메트리와 3D 프린터를 활용한 특수분장 디지털 작업에 대한 가능성과 유용성", 한국인체미용예술학회지, 20(1), pp.119~137 (2019)
- T. H. Farook, "A systematic review of the computerized tools and digital techniques applied to fabricate nasal, auricular, orbital and ocular prostheses for facial defect rehabilitation", Journal of Stomatology, Oral and Maxillofacial Surgery, 121(3), pp.268~277 (2020)
- J. Qiu, "Nasal prosthesis rehabilitation using CAD-CAM technology after total rhinectomy－A pilot study", Support Care Cancer, 19(7), pp.1055~1059 (2011)
- H. M. Abdulameer, "Nasal prosthesis fabrication using rapid prototyping and 3D printing (A case study)", International Journal of Innovative Research in Science, Engineering and Technology, 6(8), pp.15520~15528 (2017)
- S. Chaturvedi, "Rehabilitation of nose following chemical burn using CAD", CAM made sub-structure for implant retained nasal prosthesis－A clinical report, 2017, pp.2017, 2784606~
- L. Ciocca, "CAD-CAM construction of a provisional nasal prosthesis after ablative tumour surgery of the nose－A pilot case report", European Journal of Cancer Care, 18(1), pp.97~101 (2009)
- L. Ciocca, "New protocol for construction of eyeglasses-supported provisional nasal prosthesis using CAD", CAM techniques, 2010, pp.47(7), 595~604
- J. Sun, "A CAD", CAM system for fabrication of facial prostheses, 2011, pp.17(4), 253~261
- M. Fantini, "Design and rapid manufacturing of anatomical prosthesis for facial rehabilitation", International Journal on Interactive Design and Manufacturing, 7(1), pp.51~62 (2013)
- B. Reitemeier, "Creation and utilization of a digital database for nasal prosthesis models", Oncology Research and Treatment, 36(2), pp.7~11 (2013)
- J. Sun, "Template-based framework for nasal prosthesis fabrication", Rapid Prototyping Journal, 19(2), pp.68~76 (2013)
- A. Unkovskiy, "Direct 3D printing of silicone facial prostheses－A preliminary experience in digital workflow", Journal of Prosthetic Dentistry, 120(2), pp.303~308 (2018)
- D. Eggbeer, "Evaluation of direct and indirect additive manufacture of maxillofacial prostheses", Proceedings of the Institution of Mechanical Engineers. Part H, 226(9), pp.718~728 (2012)
- D. Y. Hsu, "Development of a method for manufacturing customized nasal mask cushion for CPAP therapy", Australasian Physical and Engineering Sciences in Medicine, 38(4), pp.657~664 (2015)
- A. Matsuoka, "Development of three-dimensional facial expression models using morphing methods for fabricating facial prostheses", Journal of Prosthodontic Research, 63(1), pp.66~72 (2019)
- D. Palousek, "Use of digital technologies for nasal prosthesis manufacturing", Prosthetics and Orthotics International, 38(2), pp.171~175 (2014)
- 김숭현, "특수분장사의 직무능력 향상을 위한 디지털 방식 기반 외장의안 제작 가능성－포토그래메트리, 3D프린팅, 특수분장 융합 기술을 중심으로", 대한미용학회지, 16(1), pp.29~42 (2020)
- S. K. Jindal, "Development of a 3D printable maxillofacial silicone－Part I. Optimization of polydimethylsiloxane chains and cross-linker concentration", Journal of Prosthetic Dentistry, 116(4), pp.617~622 (2016)
- Y. He, "Fabrication of low cost soft tissue prostheses with the desktop 3D printer", Scientific Reports, 27(4), pp.1~7 (2014)
- 이석민, "재활의료공학용 실리콘고무 응용", 엘라스토머 및 콤포지트, 44(1), pp.2~12 (2009)
- 박찬진, "악안면 보철용실리콘의 물리적 특성 및 색조안정성에 관한 연구", 대한치과보철학회지, 35(2), pp.330~343 (1997)