본문 바로가기
KERD
논문KCI 등재

시효처리 후의 컴포지트에 대한 레진 컴포지트의 미세 인장 결합강도에 표면처리가 미치는 효과

Effect of Surface Treatments of on the Microtensile Bond Strength of Resin Composite to Composite after aging Conditions

유미경|이광원|유민진|허미자|김희량
대한턱관절교합학회 (Korean academy of stomatognathic function and occlusion)|2010.09|구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)|제26권 제3호|pp. 339-347

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

surface treatment표면처리silaneair abrasion
주제분류치의학

초록

이전에 존재하던 컴포지트와 새로운 컴포지트 사이의 결합강도의 강화는 미세 기계적 유지를 증진하기 위한 표면 거칠기의 증가가 필요하다. 이 연구는 시효처리 후의 레진 컴포지트의 repair 결합강도에 다른 표면처리의 효과를 평가하는 것이다. 알루미늄 옥사이드를 이용한 air abrasion, chair-side silica coating한 그룹들에서 대조군과 불산 적용에 비하여 유의하게 높은 결합강도를 보였다. 레진 수복물의 repair시에 air abrasion의 사용은 필요한 것으로 보이며 부가적으로 silane의 적용은 결합강도에 긍정적 영향을 미치는 것으로 보인다.

Abstract

Enhancement of bond strength between new and old composite usually requires increasing the surface roughness to promote mechanical interlocking. This study evaluated the effect of different surface treatments on repair bond strength of resin composite after aging condition. Air abrasion with Al2O3, chairside silicacoating, and silanization provided higher resin-resin bond strength values compared to control group and HF group. Air abrasion is necessary to repair a resin restoration and additional application of silane seems to have good effects on bond strength.

참고문헌 (37)

  1. Yesilyurt, "Initial repair bond strength of a nano-filled hybrid resin : Effect of surface treatments and bonding agents", J Esthet Restor Dent, 21, pp.251~261 (2009)
  2. Gordan VV, "Teaching students the repair of resin based composite restorations: a survey of North American dental schools", J Am Dent Assoc, 134, pp.317~323 (2003)
  3. Major IA, "Selection of restorative materials in permanent teeth in general dental practice", Acta Odontol Scand, 57, pp.257~262 (1999)
  4. Brosh T, "Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites", J Prosthet Dent, 77, pp.122~126 (1997)
  5. Blum IR, "The repair of direct composite restorations: an international survey of the teaching of operative techniques and materials", Eur J Dent Educ, 7, pp.41~48 (2003)
  6. Ozcan M, "Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions", Den Mater, 23, pp.1276~1282 (2007)
  7. Soderholm KJ, "Variables influencing the repair strength of dental composites", Scand J Dent Res, 99, pp.173~180 (1991)
  8. Frankenberger R, "Fatigue behavior of the resin-resin bond of partially replaced resinbased composite restorations", Am J Dent, 16, pp.17~22 (2003)
  9. Guggenberger R, "Rocatec system-adhesion by tribochemical coating", Dtsch Zahnnarztl Z, 44, pp.874~876 (1989)
  10. Luccena-Martin C, "The effect of various surface treatments and bonding agents on the repaired strength of heat-treated composites", J Prosthet Dent, 86, pp.481~488 (2001)
  11. Swift EJ Jr, "Effect of a silane coupling agent on composite repair strengths", Am J Dent, 7, pp.200~202 (1994)
  12. Ӧzcan M, "Effect of three surface conditioning methods to improve bond strength of particulate filler resin composites" (2005), Springer Science+ Business Media
  13. Larsen IB, "Munksgaard ECChange in surface hardness of BisGMA", TEGDMA polymer due to enzymatic action, 1992, pp.71(11), 1851~1853
  14. Söderholm KJ, "Filler leachability of composites stored in distilled water or artificial saliva", J Dent Res, 75(9), pp.1692~1699 (1996)
  15. Sarrett DC, "The effects of alcoholic beverages on composite wear", Dent Mater, 16(1), pp.62~67 (2000)
  16. Mjör IA, "Placement and replacement of resin-based composite restorations in Italy", Oper Dent, 17(3), pp.82~85 (1992)
  17. Mjör IA, "Survey of amalgam and composite restorations in Korea", Int Dent J, 43(4), pp.311~316 (1993)
  18. Browning WD, "A survey of failure modes in composite resin restorations", Oper Dent, 21(4), pp.160~166 (1996)
  19. Burke FJ, "Reasons for the placement and replacement of restorations in vocational training practices", Prim Dent Care, 6(1), pp.17~20 (1999)
  20. Al-Negrish AR, "Composite resin restorations: a cross-sectional survey of placement and replacement in Jordan", Int Dent J, 52(6), pp.461~468 (2002)
  21. Mjör IA, "Failure, repair, refurbishing and longevity of restorations", Oper Dent, 27(5), pp.528~534 (2002)
  22. Ӧzcan M, "IClinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs", Int J Prosthodont, 15(3), pp.299~302 (2002)
  23. Padipatvuthikul P, "Bonding of composite to water aged composite with surface treatments", Dent Mater, 23, pp.519~525 (2007)
  24. Ruyter I, "Unpolymerized surface layers on sealants", Acta Odontol Scand, 39, pp.27~32 (1981)
  25. van Kerckhoven H, "Unreacted methacrylate groups on the surfaces of composite resins", J Dent Res, 61, pp.791~795 (1982)
  26. Li J, "Effects of surface properties on bond strength between layers of newly cured dental composites", J Oral Rehail, 24, pp.358~60 (1997)
  27. Yap AU, "Effect of aging on repair bond strengths of a polyacid-modified composite resin", Oper Dent, 24, pp.371~376 (1999)
  28. Ӧzcan M, "The use of chairside silica coating for different dental application: a clinical report", J Prosthet Dent, 87, pp.469~472 (2002)
  29. Ӧzcan M, "Effect of some parameters on silica-deposition on azirconia ceramic", J Dent Res, 84 (2005)
  30. Andrew Joiner, "Review of the effects of peroxide on enamel and dentin properties", J Dent, 35, pp.889~896 (2007)
  31. Swift EJ Jr, "Evaluation of new methods for composite repair", Dent Mater, 8(6), pp.362~365 (1992)
  32. Turner CW, "Repair of an aged, contaminated indirect composite resin with a direct,visible-light-cured composite resin", Oper Dent, 18(5), pp.187~194 (1993)
  33. Kupiec KA, "Laboratory evaluation of surface treatments for composite repair", Oper De, 21, pp.59~62 (1996)
  34. Soderholm KJ, "Variables influencing the repair strength of dental composites", Scand J Dent Res, 99, pp.173~180 (1991)
  35. Tezvergil A, "Compositecomposite repair bond strength : effect of different adhesion primers", J Dent, 31(8), pp.521~525 (2003)
  36. Lloyd CH, "The tensile strength of composite repairs", J Dent, 8, pp.17107~ (1980)
  37. Ӧztas N, "The effect of air abrasion with two new bonding agents on composite repair", Oper Dent, 28, pp.149~54 (2003)

관련 논문AI추천

복합레진의 수리 시 표면처리가 결합강도에 미치는 영향김영재, 김정욱, 김종철, 이상훈, 장기택, 최정인, 한세현대한소아치과학회 · 대한소아치과학회지2008 · 제35권 제4호Repair bond strengths of non-aged and aged resin nanoceramicsGulce Alp, Meryem Gulce Subası대한치과보철학회 · The Journal of Advanced of Prosthodontics2017 · 제9권 제5호접착 시스템이 수리된 복합 레진의 전단 결합 강도에 미치는 영향허복, 김현철, 박정길, 선은미대한치과보존학회 · Restorative Dentistry and Endodontics2008 · 제33권 제2호수리된 비스 아크릴 복합 레진의 전단결합강도에 대한 지연시간, 표면처리, 수리재료의 영향박지수, 이재인대한턱관절교합학회 · 구강회복응용과학지2018 · 제34권 제2호시효된 복합레진 표면에 다양한 표면 처리 후부착한 교정용 브라켓의 전단응력박종철, 박호원, 서현우, 이주현대한소아치과학회 · 대한소아치과학회지2014 · 제41권 제2호접착제의 종류에 따른 침식치아에 대한 복합레진의 결합강도김신, 노홍석, 이경호, 이순영, 정태성대한소아치과학회 · 대한소아치과학회지2011 · 제38권 제4호

이 간행물의 다른 논문 (11건)

임플란트 고정성 보철물에서 수와 식립위치 변화에 따른 골과 임플란트에서의 응력분포에 관한 3차원 유한요소법적 연구임종화, 이우현, 조인호pp. 221-239수종 저 침습 고정성 국소의치의 수직하중에 대한 저항동진근, 김유리, 최종인, 신창용pp. 241-251Effect of Conditioning Methods on the Shear Bond Strength of Veneering composite on Zirconia Ceramic박주미, 안승근, 송광엽, 남현석pp. 253-264건조정도에 따른 자연치아의 색조비교최미라pp. 265-271호환 가능한 수종의 치과용 임플란트 나사의 풀림토크값에 대한 연구황재웅, 최정한, 이주리, 이동환pp. 273-283
원문 보기