도재 축성 방법에 따른 금속 도재관의 전단결합강도 비교
Comparison of shear bond strength according to porcelain build-up methods
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
목적: 이 논문의 목적은 열가압법을 이용한 도재의 축성이 금속과 어떠한 결합력을 나타내는지 알아보는 것이다. 연구 재료 및 방법: 90개의 비귀금속 시편(4 × 4 × 8 mm)을 제작하여 세 개의 군으로 나누었다. 모든 시편은 군에 따라 2종류의 다른 방법으로 포세린 축성(4 × 4 × 3 mm)하였다: Group Ⅰ: Inspiration®, Group Ⅱ: Ivoclar, IPS Inline®PoM, Group Ⅲ: GC Initial IQ-One Body®PoM. 각 군의 시편의 반은 열순환시켰다. 모든 시편의 전단 결합 강도는 Instron universal testing machine을 이용하여 측정하였다. 통계학적 분석을 위해, 2-way ANOVA가 사용되었다. 결과: 열순환을 하지 않은 시편의 전단결합강도는 모든 실험군에서 유사한 값으로 나타나 통계적 유의성이 없었다(P > 0.05). 각 실험군에서 열순환 처리 한 시편에서는 전단결합강도의 감소가 나타났으나 통계적 유의성은 없었다(P > 0.05). 열순환 처리한 시편의 실험군간 전단결합강도 비교에서 실험 Ⅲ군에서 높게 나타났으나 유의한 차이는 없었다(P > 0.05). 결론: 전단결합력의 관점에서 보았을 때 열가압성형 도재는 임상적으로 유의한 것으로 사료된다.
Abstract
Purpose: This study compared the shear bond strength of heat pressed and feldspathic porcelain to metal. Through thermocycling, the clinical aspect of heat pressed porcelain fused metal was estimated. Materials and Methods: 90 non-precious metal specimens were made (4 × 4 × 8 mm) and divided to three groups. All spicimens were treated and built-up with the porcelain (4 × 4 × 3 mm) by 2 different methods according to group: Group I: Inspiration®, Group II: Ivoclar, IPS Inline®PoM, Group III: GC Initial IQOne Body®PoM. The half of each group's specimens were thermocycled. All specimens' shear bond strength were measured by Instron universal testing machine. Exact measuring point was far 1 mm from porcelain/metal interface to the porcelain side. For the statistical analysis, 2-way ANOVA was used. Results: In no-thermocycling specimens, the shear bond strength showed no statistical significance between each group (P > 0.05). In comparison between nothermocycling and thermocycling specimens in each group, the shear bond strength was decreased according to thermocycling, but there was no statistical significance (P > 0.05). In thermocycling specimens, there was no statistical significance between each group (P > 0.05). Conclusion: In feldspathic porcelain and other two types heat pressed porcelain, there was no statistical difference in the shear bond strength of porcelain to metal. The heat pressed porcelain seems to be clinically useful for the aspect of the shear bond strength.
참고문헌 (37)
- McLean JW, "Dental ceramics", pp.13~141 (1983), Quintessence Publishing
- Deany IL, "Recent advances in ceramics for dentistry", Grit Rev Oral Biol Med, 7, pp.134~143 (1996)
- Gorman CM, "Comparison of two heat-pressed all-ceramic dental materials", Dent Mater, 16, pp.389~395 (2000)
- Christensen GJ, "Clinician’s report: clinical comparison of PFM and zirconia restorations", 1(11) (2008)
- Kim IS, "Comparison of dental porcelain baking methods by base-alloy and bonding strength by thermocycling", 박사, pp.2007
- McLean JW, "Dental ceramics proceedings of the first international symposium on ceramics", pp.77~440 (1983), Quintessence Publishing
- Yamada HN, "Dental porcelain: the state of the Art- 1977", pp.1977
- Shell JS, "Study of the bond between gold alloys and porcelain", J Dent Res, 41, pp.1424~1437 (1962)
- Gilbert JL, "Bond characteristics of porcelain fused to milled titanium", Dent Mater, 10, pp.134~140 (1994)
- Hammad IA, "Designs of bond strength tests for metal-ceramic complexes: review of the literature", J Prosthet Dent, 75, pp.602~608 (1996)
- White SN, "Strength of porcelain fused to titanium beams", J Prosthet, 75, pp.640~648 (1996)
- Moffa JP, "An evaluation of nonprecious alloys for use with porcelain veneers. Part 1. physical properties", J Prosthet Dent, 30, pp.424~431 (1973)
- McLean JW, "Bonding of dental porcelain to metal. II. The base-metal alloy", porcelain bond, 1973, pp.72, 235~238
- Weight TA, "Variables affecting the strength of the porcelain", non-precious alloy bond, 1976, pp.55, 695~998
- Craig RG, "Dental porcelains", pp.123~135 (1977), University of Michigan Press
- Caputo AA, "A flexural method for evaluation of metal-ceramic bond strengths", J Dent Res, 56, pp.1051~1056 (1977)
- Mackert JR, "A flexure-shear test for porcelain-fused to metal bonding", IADR Progr&Abst, 55, pp.698~700 (1976)
- Civjan S, "Determination of apparent bond strength of alloyporcelain systems", IADR Probr&Abst, 53, pp.742~748 (1974)
- Carter JM, "Adherence of a nickel-chromium alloy and porcelain", J Prosthet Dent, 41, pp.167~172 (1979)
- Briggs D, "Practical surface analysis", pp.2~183 (1983), John Wiley and Sons Ltd
- Ozcan M, "Fracture reason in ceramic-fused-tometal restorations", J Oral Rehabil, 30, pp.265~269 (2003)
- Oilo G, "Flexural strength and internal defects of some dental porcelains", Acta Odontol Scand, 46, pp.313~322 (1988)
- Ozcan M, "Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs", Int J Prosthodont, 15, pp.299~302 (2002)
- Al-Dohan HM, "Shear strength of core-veneer interface in bi-layered ceramics", J Prosthet Dent, 91, pp.349~355 (2004)
- McLean JW, "The science and art of dental ceramics", pp.55~95 (1979), Quintessence
- McLean JW, "The science and art of dental ceram- ics", pp.189~192 (1980), Quintessence
- Anusavice KJ, "Comparative evaluation of ceramic-metal bond tests using finite element stress analysis", J Dent Res, 59, pp.608~613 (1980)
- Kim JT, "The Effect of laser etching on shear bond strength at the titanium-ceramic interface: a comparative study of four different surface treatments", 박사, pp.2007
- Lee SY, "The effects of thermocycling on the bone strength between cobalt-chromium alloy and denture base resin", J Prosthet Dent, 38, pp.38~49 (2000)
- Baek SH, "In vivo evaluation of four posterior composites", J Korean Res Soc Dent Materials, 2, pp.106~113 (1998)
- Ernst CP, "Approximal temperature increase and decrease during thermocycling in vivo", J Dent Res, 76, pp.231~ (1997)
- Wendt SL, "The effect of thermocycling in microleakage analysis", Dent Mater, 8, pp.181~184 (1992)
- 최진용, "Thermocycling 처리한 광중합형 수복용 복합레진의 마모 특성 평가", 대한치과재료학회지, 29(1), pp.10~98 (2002), 대한치과재료학회
- Gale MS, "Thermal cycling procedures for laboratory testing of dental restorations", J Dent, 27, pp.88~99 (1999)
- Yoshida K, "Effects of adhesive primers on bond strength of self-curing resin to cobalt-chromium alloy", J Prosthet Dent, 77, pp.617~620 (1997)
- Kim SS, "Comparative study on shear bond strength of press-to-metal ceramic to porcelain fused non precious metal by surface treatment methods", 석사, pp.2009
- Schweizer DM, "Comparison of bond strength of a pressed ceramic fused to metal versus feldspathic porcelain fused to metal", J Prosthodont, 14, pp.239~247 (2005)