고정성 보철물의 적합도에 대한 실험적 평가방법

키워드

참고문헌 (53)

1. 김민영, "치과병원 내원환자의 만족도 조사분석", 대한치과보철학회지, 46(1), pp.65~82 (2008), 대한치과보철학회
2. Rekow ED, "High-technology innovations-and limitations-for restorative dentistry", Dent Clin North Am, 37, pp.513~524 (1993)
3. Hung SH, "Marginal fit of porcelain- fused-to-metal and two types of ceramic crown", J Prosthet Dent, 63, pp.26~31 (1990)
4. Schwartz NL, "Unserviceable crowns and fixed partial dentures:life-span and causes for loss of serviceability", J Am Dent Assoc, 81, pp.1395~1401 (1970)
5. Grasso JE, "Effect of restoration quality on periodontal health", J Prosthet Dent, 53, pp.14~19 (1985)
6. Holmes JR, "Considerations in measurement of marginal fit", J Prosthet Dent, 62, pp.405~408 (1989)
7. Suárez MJ, "Comparison of the marginal fit of Procera ALLCeram crowns with two finish lines", Int J Prosthodont, 16, pp.229~232 (2003)
8. Pelekanos S, "Micro-CT evaluation of the marginal fit of different In-Ceram alumina copings", Eur J Esthet Dent, 4, pp.278~292 (2009)
9. Christensen GJ, "Marginal fit of gold inlay casting", J Prosthet Dent, 16, pp.297~305 (1966)
10. Sorensen SE, "Gingival and alveolar bone reaction to marginal fit of subgingival crown margins", Scand J Dent Res, 94, pp.109~114 (1986)
11. Assif D, "The flow of zinc phosphate cement under a full-coverage restoration and its effect on marginal adaptation according to the location of cement application", Quitessence Int, 18, pp.765~774 (1987)
12. McLean JW, "The estimation of cement film thickness by an in vivo technique", Br Dent J, 131, pp.107~111 (1971)
13. McLean JW, "Polycarboxylate cements. Five years’experience in general practice", Br Dent J, 132, pp.9~15 (1972)
14. Grey NJ, "In vitro comparison of conventional crowns and a new all-ceramic system", J Dent, 21, pp.47~51 (1993)
15. Tuntiprawon M, "The effect of cement thickness on the fracture strength of all-ceramic crowns", Aust Dent J, 40, pp.17~21 (1995)
16. Jorgensen KD, "The relationship between the film thickness of zinc phosphate cement and the retention of veneer crowns", Acta Odontol Scand, 26, pp.169~175 (1968)
17. Passon C, "The effect of multiple layers of die-spacer on crown retention", Oper Dent, 17, pp.42~49 (1992)
18. Sorensen JA, "Interfacial gaps of resin cemented ceramic inlays", Eur J Oral Sci, 103, pp.116~120 (1995)
19. Molin MK, "Influence of film thickness on joint bend strength of a ceramic", resin composite joint, 1996, pp.12, 245~249
20. Kunii J, "Effect of sintering on the marginal and internal fit of CAD", CAM-fabricated zirconia frameworks, 2007, pp.26, 820~826
21. Mitchell CA, "Nondestructive, in vitro quantification of crown margins", J Prosthet Dent, 85, pp.575~584 (2001)
22. Shearer B, "Influence of marginal configuration and porcelain addition on the fit on In-Ceram crowns", Biomaterials, 17, pp.1891~1895 (1996)
23. Rahme HY, "In vitro evaluation of “replica technique” in the measurement of the fit of Procera crowns", J Contemp Dent Pract, 9, pp.25~32 (2008)
24. Tsitrou EA, "Evaluation of the marginal fit of three margin designs of resin composite crowns using CAD", CAM, 2007, pp.35, 68~73
25. Tjan AH, "Marginal accuracy of complete crowns made from alternative casting alloys", J Prosthet Dent, 66, pp.157~164 (1991)
26. Stappert CF, "Marginal adaptation of three-unit fixed partial dentures constructed from pressed ceramic systems", Br Dent J, 196, pp.766~770 (2004)
27. Wolfart S, "Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation", Int J Prosthodont, 16, pp.587~592 (2003)
28. Okutan M, "Fracture load and marginal fit of shrinkage-free ZrSiO4 allceramic crowns after chewing simulation", J Oral Rehabil, 33, pp.827~832 (2006)
29. Att W, "Marginal adaptation of three different zirconium dioxide three-unit fixed dental prostheses", J Prosthet Dent, 101, pp.239~247 (2009)
30. Tinschert J, "Marginal fit of alumina- and zirconia-based fixed partial dentures produced by a CAD", CAM system, 2001, pp.26, 367~374
31. Beschnidt SM, "Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth", J Oral Rehabil, 26, pp.582~593 (1999)
32. Kern M, "Marginal fit of restorations before and after cementation in vivo", Int J Prosthodont, 6, pp.585~591 (1993)
33. Assif D, "Comparison of methods of clinical evaluation of the marginal fit of complete cast gold crowns", J Prosthet Dent, 54, pp.20~24 (1985)
34. Groten M, "Determination of the minimum number of marginal gap measurements required for practical in-vitro testing", J Prosthet Dent, 83, pp.40~49 (2000)
35. Luthardt RG, "An innovative method for evaluation of the 3-D internal fit of CAD", CAM crowns fabricated after direct optical versus indirect laser scan digitizing, 2004, pp.17, 680~685
36. Moldovan O, "Three-dimensional fit of CAD", CAM-made zirconia copings, 2011, pp.27, 1273~1278
37. 김기백, "Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and threedimensional replica techniques", The Journal of Advanced of Prosthodontics, 5(2), pp.179~186 (2013), 대한치과보철학회[DOI]
38. Coli P, "Fit of a new pressure-sintered zirconium dioxide coping", Int J Prosthodont, 17, pp.59~64 (2004)
39. Laurent M, "Clinical evaluation of the marginal fit of cast crowns-validation of the silicon replica method", J Oral Rehabil, 35, pp.116~122 (2008)
40. 김재홍, "인상 스캐닝 방법에 의해 제작된 디지털 치과 모형의 체적안정성 평가", 치위생과학회지, 14(1), pp.15~21 (2014), 한국치위생과학회
41. DeLong R, "Accuracy of a system for creating 3D computer models of dental arches", J Dent Res, 82, pp.438~442 (2003)
42. Bae SY, "Three-dimensional analysis of marginal and internal fit of copings fabricated with polyetherketoneketone (PEKK) and zirconia", J Prosthodont Res, 61, pp.106~112 (2017)
43. Schaefer O, "Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: a three-dimensional analysis of accuracy and reproducibility", Dent Mater, 28, pp.320~326 (2012)
44. 김기백, "치과용 탄성 인상재를 기반으로 채득된 디지털 모형의 정확성연구: 3차원 중첩 분석", 치위생과학회지, 14(2), pp.94~100 (2014), 한국치위생과학회
45. Nakamura T, "Marginal and internal fit of Cerec 3 CAD", CAM all-ceramic crowns, 2003, pp.16, 244~248
46. Lee KB, "Marginal and internal fit of all-ceramic crowns fabricated with two different CAD", CAM systems, 2008, pp.27, 422~426
47. Colpani JT, "Evaluation of marginal and internal fit of ceramic crown copings", Dent Mater, 29, pp.174~180 (2013)
48. Borba M, "Adaptation of all-ceramic fixed partial dentures", Dent Mater, 27, pp.1119~1126 (2011)
49. Seo D, "The effect of preparation designs on the marginal and internal gaps in Cerec3partial ceramic crowns", J Dent, 37, pp.374~382 (2009)
50. Alfaro DP, "Assessment of the internal fit of lithium disilicate crowns using micro-CT", J Prosthodont, 24, pp.381~386 (2015)
51. Rungruanganunt P, "Two imaging techniques for 3D quantification of precementation space for CAD", CAM crowns, 2010, pp.38, 995~1000
52. Kim JH, "Fit of lithium disilicate crowns fabricated from conventional and digital impressions assessed with micro-CT", J Prosthet Dent, 116, pp.551~557 (2016)
53. Nawafleh NA, "Accuracy and reliability of methods to measure marginal adaptation of crowns and FDPs:a literature review", J Prosthodont, 22, pp.419~428 (2013)

관련 논문AI추천