본문 바로가기
KERD
논문KCI 등재

절삭 및 적층 가공법으로 제작된 3본 고정성 국소의치의 변연 및 내면 적합도에 관한 연구

Marginal and internal discrepancy of 3-unit fixed dental prostheses fabricated by subtractive and additive manufacturing

최재원
대한치과보철학회 (The Korean Academy Of Prosthodontics)|2020.01|대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)|제58권 제1호|pp. 7-13|DOI https://doi.org/10.4047/jkap.2020.58.1.7

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

PrecisionAdditive manufacturing정밀도변연적합도내면적합도절삭 가공적층 가공Internal discrepancyMarginal discrepancySubtractive manufacturing
주제분류치의학

초록

목적: 본 연구의 목적은 절삭 가공법 및 적층 가공법에 의해 제작된 3본 고정성 국소의치의 변연 및 내면 적합도를 비교하는 것이다. 재료 및 방법: 상악 좌측 제2소구치가 상실된 3본 고정성 국소의치 지대치를 제작하고(주모형), 구강 스캐너를 이용해 주모형 스캔 데이터를 얻었다. 3본 고정성 보철물은 다음과 같은 3가지 방법으로 제작하였다: Milled 3-unit fixed dental prostheses (FDP) (MIL군), digital light processing (DLP) 3D printed 3-unit FDP (D3P군), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P군). 보철물의 변연 및 내면 적합도와 내면 정밀도 평가하기 위해 각각 triple-scan protocol과 콤비네이션 수식을 사용하여 스캔 데이터를 중첩하였다. 3차원 분석 프로그램(Geomagic control X)을 사용하여 root mean square (RMS) 값과 color difference map 통해 정량 및 정성 분석 시행하였다. Kruskal-Wallis test (α = .05)와 Mann-Whitney U test 및 Bonferroni correction (α = .05/3 = .017)을 이용하여 통계 분석하였다. 결과: S3P군의 변연 적합도는 MIL군과 D3P군에 비해 우수하였으며, MIL군과 D3P군은 비슷한 수준을 보였다. D3P군과 S3P군은 MIL군에 비해 상대적으로 우수한 내면 적합도를 보였으며, D3P군과 S3P군 사이에는 유의한 차이가 없었다. 한편, MIL군, S3P군, 그리고 D3P군 순으로 우수한 정밀도를 보였다. 결론: 본 연구의 한계 내에서 적층 가공법으로 제작된 3본 고정성 보철물은 절삭 가공법으로 제작된 3본 고정성 보철물에 비해 우수한 변연 및 내면 적합도를 보인 반면 정밀도는 떨어지는 것으로 나타났다.

Abstract

Purpose: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. Materials and methods: 3-unit bridge abutments without the maxillary left second premolar were prepared (reference model) and the reference model scan data was obtained using an intraoral scanner. 3-unit fixed dental prostheses were fabricated in the following three ways: Milled 3-unit FDP (MIL), digital light processing (DLP) 3D printed 3-unit FDP (D3P), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P). To evaluate the marginal/internal discrepancy and precision of the prosthesis, scan data were superimposed by the triple-scan protocol and the combinations calculator, respectively. Quantitative and qualitative analysis was performed using root mean square (RMS) value and color difference map in 3D analysis program (Geomagic control X). Statistical analysis was performed using the Kruskal-Wallis test (α=.05), Mann-Whitney U test and Bonferroni correction (α=.05/3=.017). Results: The marginal discrepancy of S3P group was superior to MIL and D3P groups, and MIL and D3P groups were similar. The D3P and S3P groups showed better internal discrepancy than the MIL group, and there was no significant difference between the D3P and S3P groups. The precision was excellent in the order of MIL, S3P, and D3P groups. Conclusion: Within the limitation of this study, the 3-unit fixed dental prostheses fabricated by additive manufacturing showed better marginal and internal discrepancy than the those of fabricated by subtractive manufacturing, but the precision was poor.

참고문헌 (45)

  1. 강신영, "Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique", The Journal of Advanced of Prosthodontics, 10(5), pp.354~360 (2018), 대한치과보철학회[DOI]
  2. Rakhshan V, "Marginal integrity of provisional resin restoration materials: A review of the literature", Saudi J Dent Res, 6, pp.33~40 (2015)
  3. Tom T, "Provisional restorations: An overview of materials used", J Adv Clin Res Insights, 3, pp.212~214 (2016)
  4. 이완선, "Evaluation of internal fit of interim crown fabricated with CAD", CAM milling and 3D printing system, 2017, pp.9(4), 265~270[DOI]
  5. Alharbi N, "Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations", J Prosthet Dent, 115, pp.760~767 (2016)
  6. Abdullah AO, "Comparative in vitro evaluation of CAD", CAM vs conventional provisional crowns, 2016, pp.24, 258~263
  7. Beuer F, "Digital dentistry: an overview of recent developments for CAD", CAM generated restorations, 2008, pp.204, 505~511
  8. van Noort R, "The future of dental devices is digital", Dent Mater, 28, pp.3~12 (2012)
  9. Torabi K, "Rapid prototyping technologies and their applications in prosthodontics, a review of literature", J Dent (Shiraz), 16, pp.1~9 (2015)
  10. Kim CM, "Trueness of milled prostheses according to number of ball-end mill burs", J Prosthet Dent, 115, pp.624~629 (2016)
  11. Hoang LN, "Die spacer thickness reproduction for central incisor crown fabrication with combined computer-aided design and 3D printing technology: an in vitro study", J Prosthet Dent, 113, pp.398~404 (2015)
  12. Sun J, "The application of rapid prototyping in prosthodontics", J Prosthodont, 21, pp.641~644 (2012)
  13. Liu Q, "Rapid prototyping in dentistry:technology and application", Int J Adv Manuf Technol, 29, pp.317~335 (2006)
  14. Özçelik TB, "Marginal adaptation of provisional CAD", CAM restorations fabricated using various simulated digital cement space settings, 2018, pp.33, 1064~1069
  15. Burns DR, "A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: report of the committee on research in fixed prosthodontics of the academy of fixed prosthodontics", J Prosthet Dent, 90, pp.474~497 (2003)
  16. Goujat A, "Marginal and internal fit of CAD-CAM inlay", onlay restorations: A systematic review of in vitro studies, 2019, pp.121, 590~597
  17. Alharbi N, "Three-dimensional evaluation of marginal and internal fit of 3D-printed interim restorations fabricated on different finish line designs", J Prosthodont Res, 62, pp.218~226 (2018)
  18. Mai HN, "Fit of interim crowns fabricated using photopolymer-jetting 3D printing", J Prosthet Dent, 118, pp.208~215 (2017)
  19. 허중보, "다양한CAD", CAM 시스템으로 제작된 3 본 고정성 가공의치 지르코니아 코어의 변연 및 내면 적합도 평가, 2011, pp.49(03), 236~244[DOI]
  20. Christensen GJ, "The state of fixed prosthodontic impressions:room for improvement", J Am Dent Assoc, 136, pp.343~346 (2005)
  21. Homsy FR, "Marginal and internal fit of pressed lithium disilicate inlays fabricated with milling, 3D printing, and conventional technologies", J Prosthet Dent, 119, pp.783~790 (2018)
  22. 안종주, "제작방법에 따른 임시 수복용 레진의 마모저항성에 관한 연구", 대한치과보철학회지, 57(2), pp.110~117 (2019), 대한치과보철학회[DOI]
  23. 조원탁, "제작방법에 따른 임시 수복용 레진의 파절강도 및 굴곡강도에 관한 연구", 대한치과보철학회지, 57(3), pp.225~231 (2019), 대한치과보철학회[DOI]
  24. Schaefer O, "Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: a three-dimensional analysis of accuracy and reproducibility", Dent Mater, 28, pp.320~326 (2012)
  25. Son K, "A comparison study of marginal and internal fit assessment methods for fixed dental prostheses", J Clin Med, 8, pp.785~ (2019)
  26. Sachs C, "Full-arch prostheses from translucent zirconia: accuracy of fit", Dent Mater, 30, pp.817~823 (2014)
  27. Molin M, "The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study", Acta Odontol Scand, 51, pp.201~206 (1993)
  28. Colpani JT, "Evaluation of marginal and internal fit of ceramic crown copings", Dent Mater, 29, pp.174~180 (2013)
  29. Praça L, "Accuracy of single crowns fabricated from ultrasound digital impressions", Dent Mater, 34, pp.e280~e288 (2018)
  30. Laurent M, "Clinical evaluation of the marginal fit of cast crowns-validation of the silicone replica method", J Oral Rehabil, 35, pp.116~122 (2008)
  31. 박진영, "Evaluation of the marginal and internal gaps of three different dental prostheses: comparison of the silicone replica technique and three-dimensional superimposition analysis", The Journal of Advanced of Prosthodontics, 9(3), pp.159~169 (2017), 대한치과보철학회[DOI]
  32. Schaefer O, "Impact of digital impression techniques on the adaption of ceramic partial crowns in vitro", J Dent, 42, pp.677~683 (2014)
  33. Dahl BE, "Internal fit of single crowns produced by CAD-CAM and lost-wax metal casting technique assessed by the triple-scan protocol", J Prosthet Dent, 117, pp.400~404 (2017)
  34. Alghazzawi TF, "Advancements in CAD", CAM technology:Options for practical implementation, 2016, pp.60, 72~84
  35. De Souz a AF, "Investigating the cutting phenomena in free-form milling using a ball-end cutting tool for die and mold manufacturing", Int J Adv Manuf Technol, 71, pp.1565~1577 (2014)
  36. 이상호, "의료 3D 프린팅 기술의 전망 및 소아치과분야에서의 활용", 대한소아치과학회지, 43(1), pp.93~108 (2016), 대한소아치과학회[DOI]
  37. Dikova T, "Dimensional accuracy and surface roughness of polymeric dental bridges produced by different 3D printing processes", Arch Mater Sci Eng, 94, pp.65~75 (2018)
  38. Nejatidanesh F, "Marginal accuracy of interim restorations fabricated from four interim autopolymerizing resins", J Prosthet Dent, 95, pp.364~367 (2006)
  39. Yao J, "Comparison of the flexural strength and marginal accuracy of traditional and CAD", CAM interim materials before and after thermal cycling, 2014, pp.112, 649~657
  40. 정승진, "다양한 CAD", CAM 방식으로 제작한 금속하부구조물 간의 변연 및 내면 적합도 비교 연구, 2019, pp.57(3), 211~218[DOI]
  41. Kim DY, "Reproducibility of different arrangement of resin copings by dental microstereolithography: Evaluating the marginal discrepancy of resin copings", J Prosthet Dent, 117, pp.260~265 (2017)
  42. Berger U, "Aspects of accuracy and precision in the additive manufacturing of plastic gears", Virtual Phys Prototype, 10, pp.49~57 (2015)
  43. Osman RB, "Build angle: Does it influence the accuracy of 3D-printed dental restorations using digital light-processing technology?", Int J Prosthodont, 30, pp.182~188 (2017)
  44. Alharbi N, "Factors influencing the dimensional accuracy of 3D-printed full-coverage dental restorations using stereolithography technology", Int J Prosthodont, 29, pp.503~510 (2016)
  45. Shembesh M, "An in vitro comparison of the marginal adaptation accuracy of CAD", CAM restorations using different impression systems, 2017, pp.26, 581~586

관련 논문AI추천

Evaluation of marginal and internal gap of three-unit metal framework according to subtractive manufacturing and additive manufacturing of CAD/CAM systems김동연, 김어빈, 김웅철, 김지환, 김혜영대한치과보철학회 · The Journal of Advanced of Prosthodontics2017 · 제9권 제6호다양한 CAD/CAM 방식으로 제작한 금속하부구조물 간의 변연 및 내면 적합도 비교 연구김유리, 김정미, 정승진, 정지혜, 조혜원대한치과보철학회 · 대한치과보철학회지2019 · 제57권 제3호3차원 프린팅 기술에 의해 제작된 3본 금속 코어의 변연 간격 평가김기백, 김원수, 김재홍한국치위생과학회 · 치위생과학회지2015 · 제15권 제2호3D 프린팅 및 밀링 방법으로 제작된 임시 보철물 적합도 비교 분석손영탁, 이규복, 손큰바다대한턱관절교합학회 · 구강회복응용과학지2020 · 제36권 제4호치과 캐드/캠 시스템으로 제작된 지르코니아 single 코핑과 3-unit 구조물의 상대적 적합도 비교김욱태, 박종경, 이완선대한턱관절교합학회 · 구강회복응용과학지2014 · 제30권 제1호Investigation of the marginal fit of a 3D-printed three-unit resin prosthesis with different build orientations and layer thicknesses곽재영, 김성균, 박지만, 양민성, 허성주대한치과보철학회 · The Journal of Advanced of Prosthodontics2022 · 제14권 제4호

이 간행물의 다른 논문 (9건)

Color stability of three dimensional-printed denture teeth exposed to various colorants안진수, 고은솔, 이주희, 김태형, 차현석pp. 1-6치과 보철 재료 표면에서 MnO2-diatom microbubbler의 세균막 제거 효과 연구: In vitro study서용범, 김명주, 권호범, 공현준, 임영준, 이은혁pp. 14-22S-reamer와 겔 형태의 이식재를 이용한 치조정 접근법을 통한 상악동 거상술 임플란트의 성공률과 생존율: 5년 이상 추적 관찰을 통한 후향적 연구김종진, 조성암pp. 23-29상악절제술로 인한 경구개 결손 환자에서의 closed hollow obturator 제작 증례양홍서, 장우형, 박찬, 임현필, 윤귀덕pp. 30-34불안정한 하악운동을 보이는 환자에서 가철성 의치 수복 증례이양진, 손동환, 조득원pp. 35-41
원문 보기