본문 바로가기
KERD
논문KCI 등재

Enhancing Quality across Industries: A Systematic Literature Review on the Impact of Six Sigma

Mohammad Ichsan|Ahmad Syamil|Muhammad Syahrazly|Maharani Putri Fadjar|Irza Raihan Revidia
사람과세계경영학회 (People&Global Business Association)|2023.12|Global Business and Finance Review|제28권 제7호|pp. 59-74|DOI 10.17549/gbfr.2023.28.7.59

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

Six SigmaQuality ImprovementLean Six SigmaOperations ManagementLean ManufacturingSystematic Literature Review (SLR)Total Quality Management (TQM)

초록

Purpose: The objective of this study is to conduct a systematic literature review on the impact of Six Sigma in various industries. Design/methodology/approach: A total of 83 articles from respected international journals published between 2015 and 2020 were selected and analyzed. The inclusion criteria ensured that the articles focused on quality improvement using the Six Sigma approach and were published by reputable publishers. Findings: The f indings of the s tudy reveal that manufacturing emerged as the most prevalent sector, with 17 studies dedicated to it. Among the selected articles, case studies were the most employed research method, accounting for 59 studies. Moreover, the study highlights the primary benefits associated with implementing Six Sigma. The most notable benefit is the reduction of defect rates, followed by improvements in efficiency and cost reduction. the primary benefit of Six Sigma is the reduction of defects (52 cases or 42.75%), followed by improvement in efficiency (49 cases or 37.40%), and then cost reduction (26 cases or 19.85%). Research limitations/implications: Based on the results, the study recommends that organizations adopt Six Sigma to enhance the quality of their processes, increase efficiency, and minimize costs. Originality/value: T his recommendation is p articularly relevant f or t he m anufacturing s ector, which s howcased the highest concentration of research studies in the literature.

Abstract

Purpose: The objective of this study is to conduct a systematic literature review on the impact of Six Sigma in various industries. Design/methodology/approach: A total of 83 articles from respected international journals published between 2015 and 2020 were selected and analyzed. The inclusion criteria ensured that the articles focused on quality improvement using the Six Sigma approach and were published by reputable publishers. Findings: The f indings of the s tudy reveal that manufacturing emerged as the most prevalent sector, with 17 studies dedicated to it. Among the selected articles, case studies were the most employed research method, accounting for 59 studies. Moreover, the study highlights the primary benefits associated with implementing Six Sigma. The most notable benefit is the reduction of defect rates, followed by improvements in efficiency and cost reduction. the primary benefit of Six Sigma is the reduction of defects (52 cases or 42.75%), followed by improvement in efficiency (49 cases or 37.40%), and then cost reduction (26 cases or 19.85%). Research limitations/implications: Based on the results, the study recommends that organizations adopt Six Sigma to enhance the quality of their processes, increase efficiency, and minimize costs. Originality/value: T his recommendation is p articularly relevant f or t he m anufacturing s ector, which s howcased the highest concentration of research studies in the literature.

참고문헌 (50)

  1. Adebanjo, D., "Prioritization of Six-Sigma project selection : A resource-based view and institutional norms perspective", Benchmarking, 23(7), pp.1983~2003 (2016)[DOI]
  2. Ahuja, I. P. S., "S trategies and success factors for overcoming challenges in TPM implementation in Indian manufacturing industry", Journal of Quality in Maintenance Engineering, 14(2), pp.123~147 (2008)[DOI]
  3. Albliwi, S. A., "A systematic review of Lean Six Sigma for the manufacturing industry", Business Process Management Journal, 21(3), pp.665~691 (2015)[DOI]
  4. Alexander, P., "Lean Six Sigma for small- and medium-sized manufacturing enterprises: A systematic review", International Journal of Quality and Reliability Management, 36(3), pp.378~397 (2019), Emerald Group Holdings Ltd[DOI]
  5. Alkunsol, W. H., "Lean Six Sigma effect on Jordanian pharmaceutical industry's performance", International Journal of Lean Six Sigma, 10(1), pp.23~43 (2019)[DOI]
  6. Amitrano, F. G., "Six Sigma application in small enterprise", Concurrent Engineering Research and Applications, 24(1), pp.69~82 (2016)[DOI]
  7. Antony, J., "Six sigma in healthcare : A systematic review of the literature", International Journal of Quality & Reliability Management, 35(5), pp.1075~1092 (2018)[DOI]
  8. Bin Ismail, Z. A., "Development of a defect monitoring system(DMOSYS)for building maintenance at polytechnic", Facilities, 36(7-8), pp.403~422 (2018)[DOI]
  9. Chongwatpol, J., "Prognostic analysis of defects in manufacturing", Industrial Management and Data Systems, 115(1), pp.64~87 (2015)[DOI]
  10. Chugani, N., "Investigating the green impact of lean, six sigma and lean six sigma", International Journal of Lean Six Sigma, 8(1), pp.7~32 (2017)[DOI]
  11. Engr. Marizen B. Contreras, "Lean Manufacturing for Tsukiden Electronics Philippines, Inc.: a Six Sigma Approach", Global Business and Finance Review, 23(4), pp.109~123 (2018), 사람과세계경영학회[DOI]
  12. Coronado, R. B., "Critical success factors for the successful implementation of six sigma projects in organisations", TQM Magazine, 14(2), pp.92~99 (2002)[DOI]
  13. de Freitas, J. G., "Impacts of Lean Six Sigma over organizational sustainability : A survey study", Journal of Cleaner Production, 156, pp.262~275 (2017)[DOI]
  14. Li Ding, "Effects of Corporate Social Performance on Corporate Financial Performance: A Two-sector Analysis between the U.S. Hospitality and Manufacturing Companies", Global Business and Finance Review, 23(1), pp.47~62 (2018), 사람과세계경영학회[DOI]
  15. Doshi, J. A., "Measurement system analysis for continuous quality improvement in automobile SMEs : Multiple case study", Total Quality Management and Business Excellence, 30(5-6), pp.626~640 (2019)[DOI]
  16. Gijo, E., "Application of Lean Six Sigma in IT support services-a case study", TQM Journal, 31(3), pp.417~435 (2019)[DOI]
  17. Goyal, A., "Quality management for sustainable manufacturing : Moving from number to impact of defects", Journal of Cleaner Production, 241, pp.118348~ (2019)[DOI]
  18. Turgut Guvenli, "EQUITY OWNERSHIP P A TTERNS AND IMP ACT ON OPERATIONS: EVIDENCE FROM U.S. FIRMS IN CHINA", Global Business and Finance Review, 7(2), pp.45~58 (2002), 사람과세계경영학회
  19. Hadidi, L. A., "Six Sigma for improving aesthetic defects in aluminum profiles facility", Facilities, 35(3-4), pp.242~267 (2017)[DOI]
  20. Hakimi, S., "Application of Six Sigma DMAIC methodology in plain yogurt production process", International Journal of Lean Six Sigma, 9(4), pp.562~578 (2018)[DOI]
  21. Kankariya, P., "Performance improvement in Garment industries by reducing defects using Six Sigma methodologies", International Journal of Scientific Research Engineering and Technology, 6(3), pp.228~236 (2017)
  22. Karout, R., "Improving software quality using Six Sigma DMAIC-based approach : a case study", Business Process Management Journal, 23(4), pp.842~856 (2017)[DOI]
  23. Karthik Bharathi, S., "Application of lean approach for reducing weld defects in a valve component: a case study", International Journal of Lean Six Sigma, 8(2) (2017)[DOI]
  24. 김아현, "A Comparative Study on Production Inducement Effects in Key Industries of Korea and the Netherlands", Global Business and Finance Review, 25(1), pp.13~32 (2020), 사람과세계경영학회[DOI]
  25. Kokkranikal, J., "Barriers and challenges in the application of Six Sigma in the hospitality industry : Some observations and findings", International Journal of Productivity and Performance Management, 62(3), pp.317~322 (2013)[DOI]
  26. Laureani, A., "Leadership and lean six sigma : a systematic literature review", Total Quality Management & Business Excellence, 30(1-2), pp.53~81 (2017)[DOI]
  27. Lolli, F., "A revised FMEA with application to a blow moulding process", International Journal of Quality and Reliability Management, 33(7), pp.900~919 (2016)[DOI]
  28. Makwana, A. D., "A methodical literature review on application of Lean & Six Sigma in various industries", Australian Journal of Mechanical Engineering, 19(1), pp.107~121 (2021), Taylor and Francis Ltd[DOI]
  29. Marques, P. A. d e A., "Six Sigma DMAIC project to improve the performance of an aluminum die casting operation in Portugal", International Journal of Quality and Reliability Management, 34(2), pp.307~330 (2017)[DOI]
  30. Milion, R. N., "Impacts of residential construction defects on customer satisfaction", International Journal of Building Pathology and Adaptation, 35(3), pp.218~232 (2017)[DOI]
  31. Modgil, S., "Total productive maintenance, total quality management and operational performance An empirical study of Indian pharmaceutical industry", Journal of Quality in Maintenance Engineering, 22(4), pp.353~377 (2016)[DOI]
  32. Moin, C. J., "Implementation of an operating procedure for quality control at production level in a RMG industry and assessment of quality improvement", Journal of the Textile Institute, 109(4), pp.524~535 (2018)[DOI]
  33. Muraliraj, J., "Annotated methodological review of lean six sigma", International Journal of Lean Six Sigma, 9(1), pp.2~49 (2018)[DOI]
  34. Padhy, R., "Six sigma project selections : a critical review", International Journal of Lean Six Sigma, 8(2), pp.244~258 (2017)[DOI]
  35. Qayyum, S., "Six sigma in construction : a review of critical success factors", International Journal of Lean Six Sigma, 7(2), pp.171~186 (2016)[DOI]
  36. Rodgers, B., "Lean and six sigma practices in the public sector : A review", International Journal of Quality & Reliability Management, 36(3), pp.437~455 (2019)[DOI]
  37. Sharma, P., "A DMAIC Six Sigma approach to quality improvement in the anodising stage of the amplifier production process", International Journal of Quality and Reliability Management, 35(9), pp.1868~1880 (2018)[DOI]
  38. Shivajee, V., "Manufacturing conversion cost reduction using quality control tools and digitization of real-time data", Journal of Cleaner Production, 237 (2019)[DOI]
  39. Singh, G., "CFSs for Six Sigma implementation : A systematic literature review", Journal of Asia Business Studies, 14(5), pp.795~818 (2020)[DOI]
  40. Sreedharan, V. R., "Assessment of critical failure factors(CFFs)of Lean Six Sigma in real life scenario : Evidence from manufacturing and service industries", Benchmarking, 25(8), pp.3320~3336 (2018)[DOI]
  41. Sreedharan, V. R., "Defect reduction in an electrical parts manufacturer : a case study", TQM Journal, 30(6), pp.650~678 (2018)[DOI]
  42. Stankalla, R., "A review of the Six Sigma belt system for manufacturing small and medium-sized enterprises", Quality Management Journal, 26(2), pp.100~117 (2019), American Society for Quality[DOI]
  43. Sunder, M., "A morphological analysis of research literature on Lean Six Sigma for services", International Journal of Operations & Production Management, 38(1), pp.149~182 (2018)[DOI]
  44. Thomas, A. J., "Implementing Lean Six Sigma to overcome the production challenges in an aerospace company", Production Planning and Control, 27(7-8), pp.591~603 (2016)[DOI]
  45. Uluskan, M., "A comprehensive insight into the Six Sigma DMAIC toolbox", International Journal of Lean Six Sigma, 7(4), pp.406~429 (2016)[DOI]
  46. Vijaya-Sunder, M., "Rejects reduction in a retail bank using Lean Six Sigma", Production Planning and Control, 27(14), pp.1131~1142 (2016)[DOI]
  47. Vijaya-Sunder, M., "Six Sigma to reduce claims processing errors in a healthcare payer firm", Production Planning and Control, 31(6), pp.496~511 (2020)[DOI]
  48. Wang, F. K., "Using the design for Six Sigma approach with TRIZ for new product development", Computers and Industrial Engineering, 98, pp.522~530 (2016)[DOI]
  49. Yaduvanshi, D., "Lean Six Sigma in Health Operations : Challenges and Opportunities 'Nirvana for Operational Efficiency in Hospitals in a Resource Limited Settings", Journal of Health Management, 19(2), pp.203~213 (2017)[DOI]
  50. Keun-Hyo Yook, "LINKING KEY SUCCESS FACTORS AND EMPLOYEE ATTITUDES TO PERFORMANCE OF CELLULAR MANUFACTURING SYSTEMS: AN EMPIRICAL STUDY", Global Business and Finance Review, 7(1), pp.75~88 (2002), 사람과세계경영학회

관련 논문AI추천

제조부문의 6시그마 활동 운영 실태에 관한 연구문제옥, 윤성필한국품질경영학회 · 품질경영학회지2017 · 제45권 제1호서비스 산업의 품질향상을 위한 6시그마 방법 적용이강인, 이순산한국산업경영시스템학회 · 한국산업경영시스템학회지2008 · 제31권 제3호6시그마 성공요인과 혁신역량이 혁신성과에 미치는 영향류태수, 이용건한국품질경영학회 · 품질경영학회지2014 · 제42권 제3호서비스 식스 시그마 리뷰안영진한국생산관리학회 · 한국생산관리학회지2008 · 제19권 제4호빅데이터 기반 6시그마 방법론의 유효성 분석: DX SS를 중심으로김윤기, 김정혁한국정보처리학회 · 정보처리학회 논문지2024 · 제13권 제1호6시그마 문헌 연구 : 국내 연구를 중심으로박광태, 이승현한국품질경영학회 · 품질경영학회지2007 · 제35권 제1호

이 간행물의 다른 논문 (15건)

Academic Integrity in a Digital Era: Should the Use of ChatGPT Be Banned in Schools?Seong No Yoon, Divine Ogugua, DonHee Leepp. 1-10Conceptualization and Development of a Scale for Brand Experience in Extended RealityJoo-Eon Jeonpp. 1-22Aiming for the Future: CEO future focus and corporate social performance김양민, 권도균, 이승혜pp. 11-27A Study on the Impact of Perceived Characteristics on Purchase Intention towards Collaboration Products between Foreign Brands and China Chic IPsXiantong Cheng, Chan-Wook Parkpp. 28-45Detecting Turning Points and Phases of Expansions and Recessions of the Restaurant Industry: Subject to Korean Restaurant Industry Business and its Growth CyclesShi-Nyu Xu, Jeong-Gil Choi, Yi-Wei Zhangpp. 46-58
원문 보기