유도결합 플라즈마 발광분광기의 매트릭스 보정법에 의한 구리 중 납, 카드뮴 및 크롬 분석에 관한 연구
The Study on Analytical Method of Lead, Cadmium and Chromium in Copper Metal by Matrix Matching Method of Inductively Coupled Plasma Atomic Emission Spectrometer
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
일정 농도의 Pb, Cd 및 Cr이 첨가된 합성 Cu표준시료용액 (RMs)을 ICP로 여러 파장에서 Cu매 트릭스 미 보정 검정곡선에 준하여 분석한 결과 모든 원소가 전 파장에서 Cu매트릭스의 영향을 받아 정확도 (Pb 140～1 090%)가 떨어졌다. Pb, Cd 및 Cr의 각각 일정 농도에 Cu의 농도를 변화시켜 분석한 결과 Cu 0.05 wt/v % (0.05 g/100 mL) 이상을 함유하면 실제 Pb, Cd 및 Cr이 첨가된 농도보다 Cu의 농도 가 증가함에 따라 일정함수의 비로 감소하거나 증가하여 Cu매트릭스의 영향이 심함을 볼 수 있었다. Cu매트릭스 보정법에 의한 합성 Cu표준시료용액 (RMs)을 분석한 결과 99.9% 이상의 정확도를 보여 주었다
Abstract
Analytical results of a fixed concentration of Pb, Cd and Cr in the synthetic copper standard solution (RMs) for using the matrix no matched standard calibration curve at various wavelength by ICP showed that accuracy (140 ～ 1,070% in case of Pb) is very poor at all wavelengths because of the Cu matrix effect. Analytical results of a fixed concentration of Pb, Cd and Cr in the different concentration solutions of Cu showed that found values were on the increase or decrease as the rate of a regular equation as the concentration of Cu was increased. Accuracies by the Cu matching method in the analysis of Pb, Cd and Cr in the synthetic copper standard solution (RMs) were higher than 99.9%.
참고문헌 (13)
- EU, "Directive 2000", 53, pp.2000, ~
- EU, "Directive 2002", 95, pp.2002, ~
- KS D, "전기동 지금 분석방법", ~ (1890)
- 久保田正明, "ICP 發光分析法, 南條正男", pp.27~70 (1988), 共立出版株式會社
- 高橋務, "液体試料の 發光分光分析-ICPを 中心として", pp.110~112 (1983), 學會出版セ ン ター
- Kunio Takada, "Effect of the Matrix Element on the Determination of Tramp Elements in Iron and Steel by ICP-OES The Usefulness of the matrix Removal", 鐵と鋼 Tetsu-to-hagane, 93(2) (2007)
- R. K. Winge, "Inductively Coupled Plasma-Atomic Emission Spectroscopy" (1991), ELSEVIER SCIENCE PUBLISHERS B. V
- ASTM E 1446-92, "Standard Test Method For Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectrometry", ~
- FEI Hao, "Determination of 7 impurity elements in aluminium alloy by ICP", Metallurgical Analysis, 24(4) (2004)
- Feng Yan-Qiu, "Determination of Nd, Al, Ni, Cu, Be, Zn, Mn, Ce and Si in Mg-Alloys by ICP-AES", Chinese Journal of Spectroscopy Laboratory, 22(6) (2005)
- Ye Xiao- Ying, "Determination of Impurity Elements in Fe-Nd Alloys by ICP-AES", Chinese Journal of Spectroscopy Laboratory, 20(1) (2003)
- 김상경, "귀금속(금, 백금)의 미량원소 평가기술", 기술표준원, 12~53 (2002)
- Leonardo S.G.Teixeira, "ICP_AES determination of small amounts of zinc in copper-base alloy after separation by adsortion of the zinc-TAN complex on Sep Pak C18 cartridges", Talanta, 46, pp.1279~1283 (1998)