Effect of Different Carrier Agents on Physicochemical Properties of Spray-dried Pineapple (Ananas comosus Merr.) Powder
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The main purpose of this study is to examine the different physicochemical properties of spray-dried products. The carrier agents and powders after the spray-drying process were analyzed for encapsulation yield, moisture content, color parameters, total polyphenol content (TPC), antioxidant capacity (AC), bulk density, flowability, wettability, hygroscopicity, water solubility index (WSI), particle size and microstructure. The spray-drying process was carried out with different carrier agents including maltodextrin (MD) and the combination of maltodextrin and gum arabic (MD-GA) with MA/GA ratio of 70/ 30, dried at the inlet/outlet air temperature of 160 °C/70 °C, 4 bar, airflow rate of 70 m3·h-1 and feed flow rate of 750 mL·h-1. The results showed that the different carrier agents have significant influences on the physicochemical properties of the powder produced by the spray-drying method. In there, while the values of recovery efficiency and flowability of spray-dried products from MD are higher than those of spray-dried products from MD-GA combination, the opposite is true for the values of TPC, AC, bulk density and wettability, whereas hygroscopicity and WSI values are equally represented in both products.
Abstract
The main purpose of this study is to examine the different physicochemical properties of spray-dried products. The carrier agents and powders after the spray-drying process were analyzed for encapsulation yield, moisture content, color parameters, total polyphenol content (TPC), antioxidant capacity (AC), bulk density, flowability, wettability, hygroscopicity, water solubility index (WSI), particle size and microstructure. The spray-drying process was carried out with different carrier agents including maltodextrin (MD) and the combination of maltodextrin and gum arabic (MD-GA) with MA/GA ratio of 70/ 30, dried at the inlet/outlet air temperature of 160 °C/70 °C, 4 bar, airflow rate of 70 m3·h-1 and feed flow rate of 750 mL·h-1. The results showed that the different carrier agents have significant influences on the physicochemical properties of the powder produced by the spray-drying method. In there, while the values of recovery efficiency and flowability of spray-dried products from MD are higher than those of spray-dried products from MD-GA combination, the opposite is true for the values of TPC, AC, bulk density and wettability, whereas hygroscopicity and WSI values are equally represented in both products.
참고문헌 (39)
- Duong, D. H., "Pineapple and its planting techniques: Part 1", pp.22~ (2003), Labour and Social Publisher
- Lobo, M. G, "Handbook of Pineapple Technology Production", pp.257~ (2017), John Wiley & Sons, Inc
- Saxena, R., , Indian Food Ind., 16, pp.25~ (1997)
- Nur Atiqah Shaari, "Production of pineapple fruit (Ananas comosus) powder using foam mat drying: Effect of whipping time and egg albumen concentration", Journal of Food Processing and Preservation, 42(2), pp.e13467~ (2017), Wiley[DOI]
- Le Quoc, "Physicochemical properties of Polygonum multiflorum Thunb. root powder produced with different carrier agents", Chemical Industry and Chemical Engineering Quarterly, 24(2), pp.93~100 (2018), National Library of Serbia[DOI]
- Tuan, P. M., , Ann.: Food Sci. Technol, 17, pp.34~ (2016)
- Pollyanna Ibrahim Silva, "Parameter optimization for spray-drying microencapsulation of jaboticaba (Myrciaria jaboticaba) peel extracts using simultaneous analysis of responses", Journal of Food Engineering, 117(4), pp.538~544 (2013), Elsevier BV[DOI]
- Rosario Castellar, "Color Properties and Stability of Betacyanins from Opuntia Fruits", Journal of Agricultural and Food Chemistry, 51(9), pp.2772~2776 (2003), American Chemical Society (ACS)[DOI]
- Phisut, N, , Int. Food Res. J., 19, pp.1297~ (2012)
- Winston Duo Wu, "Towards spray drying of high solids dairy liquid: Effects of feed solid content on particle structure and functionality", Journal of Food Engineering, 123, pp.130~135 (2014), Elsevier BV[DOI]
- Renata V. Tonon, "Physicochemical and morphological characterisation of açai (Euterpe oleraceae Mart.) powder produced with different carrier agents", International Journal of Food Science & Technology, 44(10), pp.1950~1958 (2009), Wiley[DOI]
- Jittanit, W., , Chiang Mai J. Sci., 37, pp.498~ (2010)
- S. Mujaffar, "THE PRODUCTION OF A SPRAY-DRIED PINEAPPLE POWDER", Acta Horticulturae, (1047), pp.315~322 (2014), International Society for Horticultural Science (ISHS)[DOI]
- Paola Roccia, "Influence of spray-drying operating conditions on sunflower oil powder qualities", Powder Technology, 254, pp.307~313 (2014), Elsevier BV[DOI]
- Siddiqua, A., , Int. J. ChemTech Res, 2, pp.205~ (2010)
- Carmen Soto, "Effect of extraction conditions on total phenolic content and antioxidant capacity of pretreated wild Peumus boldus leaves from Chile", Food and Bioproducts Processing, 92(3), pp.328~333 (2014), Elsevier BV[DOI]
- Athanasia M. Goula, "Influence of Spray Drying Conditions on Tomato Powder Properties", Drying Technology, 22(5), pp.1129~1151 (2004), Informa UK Limited[DOI]
- D. Geldart, "Characterization of powder flowability using measurement of angle of repose", China Particuology, 4(3-4), pp.104~107 (2006), Elsevier BV[DOI]
- Barbara Freudig, "Dispersion of powders in liquids in a stirred vessel", Chemical Engineering and Processing: Process Intensification, 38(4-6), pp.525~532 (1999), Elsevier BV[DOI]
- Y.Z. Cai, "Production and Properties of Spray-dried Amaranthus Betacyanin Pigments", Journal of Food Science, 65(7), pp.1248~1252 (2000), Wiley[DOI]
- Anderson, R. A., , Cereal Sci. Today, 14, pp.4~ (1969)
- Duduku Krishnaiah, "Microencapsulation of Morinda citrifolia L. extract by spray-drying", Chemical Engineering Research and Design, 90(5), pp.622~632 (2012), Elsevier BV[DOI]
- Bindu Bazaria, "Effect of dextrose equivalency of maltodextrin together with Arabic gum on properties of encapsulated beetroot juice", Journal of Food Measurement and Characterization, 11(1), pp.156~163 (2017), Springer Science and Business Media LLC[DOI]
- Maria Mozarina Beserra Almeida, "Bioactive compounds and antioxidant activity of fresh exotic fruits from northeastern Brazil", Food Research International, 44(7), pp.2155~2159 (2011), Elsevier BV[DOI]
- Sangeeta Saikia, "Effect of Spray Drying of Four Fruit Juices on Physicochemical, Phytochemical and Antioxidant Properties", Journal of Food Processing and Preservation, 39(6), pp.1656~1664 (2015), Wiley[DOI]
- Andrea Mara Righetto, "Effect of Encapsulating Materials on Water Sorption, Glass Transition and Stability of Juice From Immature Acerola", International Journal of Food Properties, 8(2), pp.337~346 (2005), Informa UK Limited[DOI]
- Poonam Mishra, "Effect of maltodextrin concentration and inlet temperature during spray drying on physicochemical and antioxidant properties of amla (Emblica officinalis) juice powder", Food and Bioproducts Processing, 92(3), pp.252~258 (2014), Elsevier BV[DOI]
- R. Y. Jumah, "MANUFACTURING PARAMETERS AND QUALITY CHARACTERISTICS OF SPRAY DRIED JAMEED", Drying Technology, 18(4-5), pp.967~984 (2000), Informa UK Limited[DOI]
- Carr, R. L, , Bri. Chem. Eng, 15, pp.1541~ (1970)
- E Teunou, "Effect of relative humidity and temperature on food powder flowability", Journal of Food Engineering, 42(2), pp.109~116 (1999), Elsevier BV[DOI]
- J.J Fitzpatrick, "Effect of powder properties and storage conditions on the flowability of milk powders with different fat contents", Journal of Food Engineering, 64(4), pp.435~444 (2004), Elsevier BV[DOI]
- R. A. Buffo, "Effects of agglomeration on the properties of spray-dried encapsulated flavours", Flavour and Fragrance Journal, 17(4), pp.292~299 (2002), Wiley[DOI]
- Regiane Victória de Barros Fernandes, "Gum arabic", starch, inulin as wall materials on the microencapsulation of rosemary essential oil, pp.Carbohydrate Polymers, 2014[DOI]
- Singhanat Phoungchandang, , ScienceAsia, 36(1), pp.40~ (2010), Science Society of Thailand[DOI]
- Saydi, D., , Iran. J. Chem. Eng., 9, pp.55~ (2012)
- Hong-Kwong Lim, "Effects of Different Wall Materials on the Physicochemical Properties and Oxidative Stability of Spray-Dried Microencapsulated Red-Fleshed Pitaya (Hylocereus polyrhizus) Seed Oil", Food and Bioprocess Technology, 5(4), pp.1220~1227 (2012), Springer Science and Business Media LLC[DOI]
- J LOKSUWAN, "Characteristics of microencapsulated β-carotene formed by spray drying with modified tapioca starch, native tapioca starch and maltodextrin", Food Hydrocolloids, 21(5-6), pp.928~935 (2007), Elsevier BV[DOI]
- Cristhiane Caroline Ferrari, "Influence of carrier agents on the physicochemical properties of blackberry powder produced by spray drying", International Journal of Food Science & Technology, 47(6), pp.1237~1245 (2012), Wiley[DOI]
- G. R. Chegini, "Effect of Spray-Drying Conditions on Physical Properties of Orange Juice Powder", Drying Technology, 23(3), pp.657~668 (2005), Informa UK Limited[DOI]