치과용 금합금에 대한 금속 프라이머 처리와 열순환 처리가 교정용 브라켓의 전단결합강도에 미치는 영향
Effect of metal primer and thermocycling on shear bonding strength between the orthodontic bracket and gold alloy
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
치과용 금합금에 교정용 브라켓 접착 시 금속 프라이머와 열순환 처리가 전단결합강도에 미치는 영향을 알아보기 위하여 80개의 치과용 금합금 시편을 샌드블라스팅만 처리한 군과 3종류의 금속 프라이머(Alloy Primer, Metaltite, V-Primer)처리를 시행한 군으로 분류하고, 이를 열순환 처리 시행 여부에 따라 모두 8개 군으로 분류하였다. 만능물성시험기를 사용하여 브라켓의 전단결합강도를 측정하고, modified ARI (Adhesive Remnant Index) scores를 통해 브라켓 접착면의 파절 양상을 평가하였다. 열순환 처리 미시행 시에는 금속 프라이머의 적용 시 샌드블라스팅만 단독으로 처리한 경우에 비하여 통계적으로 유의성 있는 전단결합강도의 증가가 있었다 (p ＜ 0.05). 열순환 처리를 시행한 군에는 금속 프라이머의 처리에 의한 전단결합강도의 변화는 유의한 차이가 없었다 (p ＞ 0.05). 금속 프라이머를 적용한 경우 열순환 처리 미시행 시에는 파절 양상이 브라켓과 접착제 계면에서의 파절 발생 빈도가 높았으나, 열순환 처리 시행 시에는 각 군 간 파절 양상에 유의한 차이가 없었다. 이상의 결과로 금속 프라이머의 적용이 치과용 금합금에 대한 교정용 브라켓 접착 시 초기 접착 강도에서는 유의성 있는 결합력의 증가를 보이나, 열순환 처리 시행 후에는 결합 강도에서는 유의한 차이가 없는 것으로 나타나 금속 프라이머에 의한 결합력 증가가 감소하는 것으로 생각한다.
Abstract
Objective: The aim of this study was to evaluate the effect of metal primers and thermocycling on shear bond strength between the orthodontic bracket and gold alloy. Methods: For this study, 80 specimens made of dental gold alloy were divided into 8 groups based on the combination of metal primers (none, Alloy primer, Metaltite, V-primer) and thermocycling (with and without thermocycling). Shear bond strength testing was performed with a universal testing machine. Bond failure sites were classified by a modified ARI (Adhesive Remnant Index) score. Results: All metal primer treated groups showed a significantly higher shear bond strength than the only sandblasting treated group without thermocycling (p ＜ 0.05). There were no significant differences on shear bond strength in the groups with thermocycling (p ＞ 0.05). Bond failure sites of the metal primer treated group without thermocycling occurred at gold alloy/adhesive interface, whereas there were no differences on bonding failure sites in the groups with thermocycling. Conclusions: These findings suggest that using metal primer on gold alloy enhances the initial bracket bond strength. But, this effect was not shown with thermocycling.
참고문헌 (25)
- YuHS, "A study on the distributions and trends in malocclusion patients from Department of Orthodontics, College of Dentistry, Yonsei University", Korean J Orthod, 29, pp.267~276 (1999)
- Buonocore MG, "A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", J Dent Res, 34, pp.849~853 (1955)
- Newman GV, "Epoxy adhesives for orthodontic attachments: progress report", Am J Orthod, 51, pp.901~912 (1965)
- Keim RG, "2002 JCO study of orthodontic diagnosis and treatment procedures. Part 1. Results and trends", J Clin Orthod, 36, pp.553~568 (2002)
- Boyd RL, "Periodontal considerations in the use of bonds or bands on molars in adolescents and adults", Angle Orthod, 62, pp.117~126 (1992)
- Proffit WR, "Contemporary orthodontics. 4th ed", pp.658~659 (2007), Mosby Elsevier
- Wood DP, "Bonding to porcelain and gold", Am J Orthod, 89, pp.194~205 (1986)
- Andreasen GF, "Bonding and debonding brackets to porcelain and gold", Am J Orthod Dentofacial Orthop, 93, pp.341~345 (1988)
- Büyükyilmaz T, "Improving orthodontic bonding to gold alloy", Am J Orthod Dentofacial Orthop, 108, pp.510~518 (1995)
- Graber TM, "Orthodontics: current principles and techniques. 4th ed", pp.596~602 (2005), Elsevier Mosby
- Gale MS, "Thermal cycling procedures for laboratory testing of dental restorations", J Dent, 27, pp.89~99 (1999)
- Bishara SE, "Effect of thermocycling on the shear bond strength of a cyanoacrylate orthodontic adhesive", Am J Orthod Dentofacial Orthop, 123, pp.21~24 (2003)
- Artun J, "Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment", Am J Orthod, 85, pp.333~340 (1984)
- Zachrisson BU, "Orthodontic bonding to artificial tooth surfaces: clinical versus laboratory findings", Am J Orthod Dentofacial Orthop, 117, pp.592~594 (2000)
- Kojima K, "Adhesion to precious metals utilizing triazine dithione derivative monomer", J Jpn Dent Mater, 6, pp.702~707 (1987)
- Suzuki M, "A study on the adsorption structure of an adhesive monomer for precious metals by surface-enhanced Raman scattering spectroscopy", Biomaterials, 20, pp.839~845 (1999)
- Ryou DB, "An effect priming gold alloy on bonding to orthodontic bracket", J Korean Res Soc Dent Mater, 30, pp.347~356 (2003)
- Yanagida H, "Bonding of prosthetic composite material to Ti-6Al-7Nb alloy with eight metal conditioners and a surface modification technique", Am J Dent, 14, pp.291~294 (2001)
- Tanaka T, "Surface treatment of nonprecious alloys for adhesion-fixed partial dentures", J Prosthet Dent, 55, pp.456~462 (1986)
- Sparrius O, "Marginal leakage of composite resin restorations in combination with dentinal and enamel bonding agents", J Prosthet Dent, 61, pp.678~684 (1989)
- 강상욱, "수 종의 도재 수복물에 부착된 세라믹 브라켓의 전단접착강도와 파절양상에 열순환이 미치는 영향", 대한치과교정학회지, 39(4), pp.225~233 (2009), 대한치과교정학회
- Atsuta M, "Bonding fixed prosthodontic composite resin and precious metal alloys with the use of a vinyl-thiol primer and an adhesive opaque resin", J Prosthet Dent, 67, pp.296~300 (1992)
- Matsumura H, "Effect of noble metal conditioners on bonding between prosthetic composite material and silver-palladium-copper-gold alloy", J Prosthet Dent, 81, pp.710~714 (1999)
- Yoshida K, "Effect of MMA-PMMA resin polymerization initiators on the bond strengths of adhesive primers for noble metal", Dent Mater, 15, pp.332~336 (1999)
- Reynolds IR, "A review of direct orthodontic bonding", Br J Orthod, 2, pp.171~178 (1975)