Effect of silica coating on bond strength between a gold alloy and metal bracket bonded with chemically cured resin
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: The purpose of this study was to evaluate the effects of three different surface conditioning methods on the shear bond strength (SBS) of metal brackets bonded directly to gold alloy with chemically cured resin. Methods: Two hundred ten type III gold alloy specimens were randomly divided into six groups according to the combination of three different surface conditioning methods (aluminum oxide sandblasting only, application of a metal primer after aluminum oxide sandblasting, silica coating and silanation) and thermocycling (with thermocycling, without thermocycling). After performing surface conditioning of specimens in accordance with each experimental condition, metal brackets were bonded to all specimens using a chemically cured resin. The SBS was measured at the moment of bracket debonding, and the resin remnants on the specimen surface were evaluated using the adhesive remnant index. Results: Application of metal primer after aluminum oxide sandblasting yielded a higher bond strength than that with aluminum oxide sandblasting alone (p < 0.001), and silica coating and silanation yielded a higher bond strength than that with metal primer after aluminum oxide sandblasting (p < 0.001). There was no significant change in SBS after thermocycling in all groups. Conclusions: With silica coating and silanation, clinically satisfactory bond strength can be attained when metal brackets are directly bonded to gold alloys using a chemically cured resin.
Abstract
Objective: The purpose of this study was to evaluate the effects of three different surface conditioning methods on the shear bond strength (SBS) of metal brackets bonded directly to gold alloy with chemically cured resin. Methods: Two hundred ten type III gold alloy specimens were randomly divided into six groups according to the combination of three different surface conditioning methods (aluminum oxide sandblasting only, application of a metal primer after aluminum oxide sandblasting, silica coating and silanation) and thermocycling (with thermocycling, without thermocycling). After performing surface conditioning of specimens in accordance with each experimental condition, metal brackets were bonded to all specimens using a chemically cured resin. The SBS was measured at the moment of bracket debonding, and the resin remnants on the specimen surface were evaluated using the adhesive remnant index. Results: Application of metal primer after aluminum oxide sandblasting yielded a higher bond strength than that with aluminum oxide sandblasting alone (p < 0.001), and silica coating and silanation yielded a higher bond strength than that with metal primer after aluminum oxide sandblasting (p < 0.001). There was no significant change in SBS after thermocycling in all groups. Conclusions: With silica coating and silanation, clinically satisfactory bond strength can be attained when metal brackets are directly bonded to gold alloys using a chemically cured resin.
참고문헌 (24)
- Boyd RL, "Periodontal considerations in the use of bonds or bands on molars in adolescents and adults", Angle Orthod, 62, pp.117~126 (1992)
- Van Meerbeek B, "Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges", Oper Dent, 28, pp.215~235 (2003)
- Wood DP, "Bonding to porcelain and gold", Am J Orthod, 89, pp.194~205 (1986)
- Zachrisson BU, "Recent advances in bonding to gold, amalgam and porcelain", J Clin Orthod, 27, pp.661~675 (1993)
- Antoniadou M, "Effect of a new metal primer on the bond strength between a resin cement and two high-noble alloys", J Prosthet Dent, 84, pp.554~560 (2000)
- 이영기, "치과용 금합금에 대한 금속 프라이머 처리와 열순환 처리가 교정용 브라켓의 전단결합강도에 미치는 영향", 대한치과교정학회지, 39(5), pp.320~329 (2009), 대한치과교정학회
- Nergiz I, "Effect of alloy type and surface conditioning on roughness and bond strength of metal brackets", Am J Orthod Dentofacial Orthop, 125, pp.42~50 (2004)
- 정민호, "Light emitting diode를 이용한 광중합 시 금합금과 교정용 금속 브라켓의 전단접착강도", 대한치과교정학회지, 40(1), pp.27~33 (2010), 대한치과교정학회
- Shon WJ, "The effects of primer precuring on the shear bond strength between gold alloy surfaces and metal brackets", Eur J Orthod, 34, pp.72~76 (2012)
- Artun J, "Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment", Am J Orthod, 85, pp.333~340 (1984)
- Bishara SE, "Effect of thermocycling on the shear bond strength of a cyanoacrylate orthodontic adhesive", Am J Orthod Dentofacial Orthop, 123, pp.21~24 (2003)
- Büyükyilmaz T, "Improved orthodontic bonding to silver amalgam. Part 2. Lathe-cut, admixed, and spherical amalgams with different intermediate resins", Angle Orthod, 68, pp.337~344 (1998)
- Büyükyilmaz T, "Improving orthodontic bonding to gold alloy", Am J Orthod Dentofacial Orthop, 108, pp.510~518 (1995)
- Bulbul M, "The effect of primers on shear bond strength of acrylic resins to different types of metals", J Prosthet Dent, 103, pp.303~308 (2010)
- Matsumura H, "Effect of noble metal conditioners on bonding between prosthetic composite material and silver-palladiumcopper-gold alloy", J Prosthet Dent, 81, pp.710~714 (1999)
- Yoshida K, "Effect of MMA-PMMA resin polymerization initiators on the bond strengths of adhesive primers for noble metal", Dent Mater, 15, pp.332~336 (1999)
- Sun R, "Characterisation of tribochemically assisted bonding of composite resin to porcelain and metal", J Dent, 28, pp.441~445 (2000)
- Atsü SS, "Effects of silica coating and silane surface conditioning on the bond strength of metal and ceramic brackets to enamel", Angle Orthod, 76, pp.857~862 (2006)
- Watanabe T, "Influence of simplified silica coating method on the bonding strength of resin cement to dental alloy", Dent Mater J, 27, pp.16~20 (2008)
- Matinlinna JP, "An introduction to silanes and their clinical applications in dentistry", Int J Prosthodont, 17, pp.155~164 (2004)
- Min-Ho Jung, "Effects of silanation time on shear bond strength between a gold alloy surface and metal bracket", 대한치과교정학회지, 43(3), pp.127~133 (2013), 대한치과교정학회
- Schneider W, "Bond strength of composites to etched and silica-coated porcelain fusing alloys", Dent Mater, 8, pp.211~215 (1992)
- Cozza P, "Shear bond strength of metal brackets on enamel", Angle Orthod, 76, pp.851~856 (2006)
- Patusco VC, "Bond strength of metallic brackets after dental bleaching", Angle Orthod, 79, pp.122~126 (2009)