Cone-beam computed tomography based evaluation of rotational patterns of dentofacial structures in skeletal Class III deformity with mandibular asymmetry
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: The purpose of this study was to assess rotational patterns of dentofacial structures according to different vertical skeletal patterns by cone-beam computed tomography (CBCT) and analyze their influence on menton deviation in skeletal Class III deformity with mandibular asymmetry. Methods: The control group consisted of 30 young adults (15 men, 15 women) without any severe skeletal deformity. The asymmetry group included 55 adults (28 men, 27 women) with skeletal Class III deformity and at least 3-mm menton deviation from the midsagittal plane; it was divided into the hyperdivergent and hypodivergent subgroups using a mandibular plane angle cutoff of 35o. Fourteen rotational variables of the dental arches and mandible were measured and compared among the groups. Correlations between menton deviation and the other variables were evaluated. Results: The asymmetry group showed significantly larger measurements of roll and yaw in the mandible than the control group. The hypodivergent subgroup showed significant differences in maxillary posterior measurements of yaw (p < 0.01) and maxillary anterior shift (p < 0.05) compared with the hyperdivergent subgroup. All the mandibular measurements had significant correlations with menton deviation (p < 0.01). Most measurements of roll were positively correlated with one another (p < 0.01). Measurements of yaw and roll in the posterior regions were also positively correlated (p < 0.05). Conclusions: Menton deviation in skeletal Class III deformity with mandibular asymmetry is influenced by rotation of mandibular posterior dentofacial structures. The rotational patterns vary slightly according to the vertical skeletal pattern. [Korean J Orthod 2015;45(4):153-163]
Abstract
Objective: The purpose of this study was to assess rotational patterns of dentofacial structures according to different vertical skeletal patterns by cone-beam computed tomography (CBCT) and analyze their influence on menton deviation in skeletal Class III deformity with mandibular asymmetry. Methods: The control group consisted of 30 young adults (15 men, 15 women) without any severe skeletal deformity. The asymmetry group included 55 adults (28 men, 27 women) with skeletal Class III deformity and at least 3-mm menton deviation from the midsagittal plane; it was divided into the hyperdivergent and hypodivergent subgroups using a mandibular plane angle cutoff of 35o. Fourteen rotational variables of the dental arches and mandible were measured and compared among the groups. Correlations between menton deviation and the other variables were evaluated. Results: The asymmetry group showed significantly larger measurements of roll and yaw in the mandible than the control group. The hypodivergent subgroup showed significant differences in maxillary posterior measurements of yaw (p < 0.01) and maxillary anterior shift (p < 0.05) compared with the hyperdivergent subgroup. All the mandibular measurements had significant correlations with menton deviation (p < 0.01). Most measurements of roll were positively correlated with one another (p < 0.01). Measurements of yaw and roll in the posterior regions were also positively correlated (p < 0.05). Conclusions: Menton deviation in skeletal Class III deformity with mandibular asymmetry is influenced by rotation of mandibular posterior dentofacial structures. The rotational patterns vary slightly according to the vertical skeletal pattern. [Korean J Orthod 2015;45(4):153-163]
참고문헌 (29)
- Enlow DH, "Facial growth" (1990), Saunders
- Shah SM, "An assessment of asymmetry in the normal craniofacial complex", Angle Orthod, 48, pp.141~148 (1978)
- Pirttiniemi P, "Combined effects of errors in frontal-view asymmetry diagnosis", Eur J Orthod, 18, pp.629~636 (1996)
- Padwa BL, "Occlusal cant in the frontal plane as a reflection of facial asymmetry", J Oral Maxillofac Surg, 55, pp.811~816 (1997)
- Trpkova B, "Assessment of facial asymmetries from posteroanterior cephalograms: validity of reference lines", Am J Orthod Dentofacial Orthop, 123, pp.512~520 (2003)
- Vannier MW, "Three dimensional CT reconstruction images for craniofacial surgical planning and evaluation", Radiology, 150, pp.179~184 (1984)
- Fuhrmann RA, "Threedimensional imaging of craniomaxillofacial structures with a standard personal computer", Dentomaxillofac Radiol, 24, pp.260~263 (1995)
- Vannier MW, "Three-dimensional dental imaging by spiral CT. A progress report", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 84, pp.561~570 (1997)
- Min-Gun Kim, "Three-dimensional symmetry and parallelism of the skeletal and soft-tissue poria in patients with facial asymmetry", 대한치과교정학회지, 44(2), pp.62~68 (2014), 대한치과교정학회
- Ackerman JL, "Pitch, roll, and yaw: describing the spatial orientation of dentofacial traits", Am J Orthod Dentofacial Orthop, 131, pp.305~310 (2007)
- Kim JM, "3D rotational pattern of the dental arch and mandible in class III patients with facial asymmetry", PhD, pp.2009
- Severt TR, "The prevalence of facial asymmetry in the dentofacial deformities population at the University of North Carolina", Int J Adult Orthodon Orthognath Surg, 12, pp.171~176 (1997)
- Baek SH, "Skeletodental factors affecting chin point deviation in female patients with class III malocclusion and facial asymmetry: a three-dimensional analysis using computed tomography", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 104, pp.628~639 (2007)
- Hwang HS, "Maxillofacial 3-dimensional image analysis for the diagnosis of facial asymmetry", Am J Orthod Dentofacial Orthop, 130, pp.779~785 (2006)
- Baek SH, "A soft tissue analysis on facial esthetics of Korean young adults", Korean J Orthod, 21, pp.131~170 (1991)
- Baek C, "Morphologic evaluation and classification of facial asymmetry using 3-dimensional computed tomography", J Oral Maxillofac Surg, 70, pp.1161~1169 (2012)
- Maeda M, "3D-CT evaluation of facial asymmetry in patients with maxillofacial deformities", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 102, pp.382~390 (2006)
- Haraguchi S, "Facial asymmetry in subjects with skeletal Class III deformity", Angle Orthod, 72, pp.28~35 (2002)
- Chebib FS, "Indices of craniofacial asymmetry", Angle Orthod, 51, pp.214~226 (1981)
- Adams GL, "Comparison between traditional 2-dimensional cephalometry and a 3-dimensional approach on human dry skulls", Am J Orthod Dentofacial Orthop, 126, pp.397~409 (2004)
- Türp JC, "Mandibular condyles and rami are asymmetric structures", Cranio, 16, pp.51~56 (1998)
- El-Beialy AR, "Accuracy and reliability of cone-beam computed tomography measurements: Influence of head orientation", Am J Orthod Dentofacial Orthop, 140, pp.157~165 (2011)
- Jacobson A., "Radiographic cephalometry from basics to videoimaging" (1995), Quintessence Publishing
- Lascala CA, "Analysis of the accuracy of linear measurements obtained by cone beam computed tomography (CBCT-NewTom)", Dentomaxillofac Radiol, 33, pp.291~294 (2004)
- Park JU, "Assessment of asymmetry in a normal occlusion sample and asymmetric patients with three-dimensional cone beam computed tomography: a study for a transverse reference plane", Angle Orthod, 82, pp.860~867 (2012)
- Cho HJ, "A three-dimensional cephalometric analysis", J Clin Orthod, 43, pp.235~252 (2009)
- Kim SJ, "Morphologic relationship between the cranial base and the mandible in patients with facial asymmetry and mandibular prognathism", Am J Orthod Dentofacial Orthop, 144, pp.330~340 (2013)
- Hwang HS, "Change of lip-line cant after 1-jaw orthognathic surgery in patients with mandibular asymmetry", Am J Orthod Dentofacial Orthop, 136, pp.564~569 (2009)
- Lee MS, "Assessing soft-tissue characteristics of facial asymmetry with photographs", Am J Orthod Dentofacial Orthop, 138, pp.23~31 (2010)