Influence of changing various parameters in miniscrew-assisted rapid palatal expansion: A three-dimensional finite element analysis
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: This study aimed to analyze the effect of changing various parameters of the bone-borne rapid palatal expander (RPE) using the finite element method (FEM). Methods: In eight experimental groups, we investigated the effect of the number, position, and length of miniscrews; positional changes of the expander; and changes in the hook length on maxillary expansion. In finite element analysis, we compared the magnitude and distribution of stress, and the displacement changes following expansion of the bone-borne RPE. Results: When we compared the number and position of miniscrews, placing miniscrews in the anterior and posterior sides was advantageous for maxillary expansion in terms of stress distribution and displacement changes. Miniscrew length did not significantly affect stress distribution and displacement changes. Furthermore, anteroposterior displacement of the expander did not significantly affect transverse maxillary expansion but had various effects on vertical changes of the maxilla. The maxilla rotated clockwise when the miniscrews were placed in the anterior region. The hook length of the expander did not show consistent results in terms of changes in stress distribution and magnitude or in displacement changes. Conclusions: The findings of this study suggest that changes in the location and length of the miniscrews and displacement of the bone-borne RPE could affect the pattern of the maxillary expansion, depending on the combination of these factors.
Abstract
Objective: This study aimed to analyze the effect of changing various parameters of the bone-borne rapid palatal expander (RPE) using the finite element method (FEM). Methods: In eight experimental groups, we investigated the effect of the number, position, and length of miniscrews; positional changes of the expander; and changes in the hook length on maxillary expansion. In finite element analysis, we compared the magnitude and distribution of stress, and the displacement changes following expansion of the bone-borne RPE. Results: When we compared the number and position of miniscrews, placing miniscrews in the anterior and posterior sides was advantageous for maxillary expansion in terms of stress distribution and displacement changes. Miniscrew length did not significantly affect stress distribution and displacement changes. Furthermore, anteroposterior displacement of the expander did not significantly affect transverse maxillary expansion but had various effects on vertical changes of the maxilla. The maxilla rotated clockwise when the miniscrews were placed in the anterior region. The hook length of the expander did not show consistent results in terms of changes in stress distribution and magnitude or in displacement changes. Conclusions: The findings of this study suggest that changes in the location and length of the miniscrews and displacement of the bone-borne RPE could affect the pattern of the maxillary expansion, depending on the combination of these factors.
참고문헌 (26)
- Angell EH, "Treatment of irregularities of the permanent or adult teeth", Dent Cosm, 1, pp.540~544 (1860)
- Lux CJ, "Occlusal status and prevalence of occlusal malocclusion traits among 9-year-old schoolchildren", Eur J Orthod, 31, pp.294~299 (2009)
- Will LA, "Transverse maxillary deformities : diagnosis & treatment", Sel Read Oral Maxillofac Surg, 5, pp.1~28 (1996)
- Haas AJ, "The treatment of maxillary deficiency by opening the midpalatal suture", Angle Orthod, 35, pp.200~217 (1965)
- Adkins MD, "Arch perimeter changes on rapid palatal expansion", Am J Orthod Dentofacial Orthop, 97, pp.194~199 (1990)
- Baccetti T, "Treatment timing for rapid maxillary expansion", Angle Orthod, 71, pp.343~350 (2001)
- Chung CH, "Skeletal and dental changes in the sagittal, vertical, and transverse dimensions after rapid palatal expansion", Am J Orthod Dentofacial Orthop, 126, pp.569~575 (2004)
- Persson M, "Palatal suture closure in man from 15 to 35 years of age", Am J Orthod, 72, pp.42~52 (1977)
- Brossman RE, "Facioskeletal remodelling resulting from rapid palatal expansion in the monkey(Macaca cynomolgus)", Arch Oral Biol, 18, pp.987~994 (1973)
- Vassar JW, "Dentoskeletal effects of a temporary skeletal anchorage device-supported rapid maxillary expansion appliance(TSADRME) : a pilot study", Angle Orthod, 86, pp.241~249 (2016)
- Lin L, "Tooth-borne vs bone-borne rapid maxillary expanders in late adolescence", Angle Orthod, 85, pp.253~262 (2015)
- Kim KB, "Miniscrew implant-supported rapid maxillary expansion", J Clin Orthod, 46, pp.608~612 (2012)
- Zandi M, "Short-term skeletal and dental changes following bone-borne versus tooth-borne surgically assisted rapid maxillary expansion : a randomized clinical trial study", J Craniomaxillofac Surg, 42, pp.1190~1195 (2014)
- Lee HK, "Stress distribution and displacement by different bone-borne palatal expanders with microimplants : a three-dimensional finite-element analysis", Eur J Orthod, 36, pp.531~540 (2014)
- Tanne K, "Three-dimensional finite element analysis for stress in the periodontal tissue by orthodontic forces", Am J Orthod Dentofacial Orthop, 92, pp.499~505 (1987)
- Rees JS, "Elastic modulus of the periodontal ligament", Biomaterials, 18, pp.995~999 (1997)
- Provatidis CG, "Evaluation of craniofacial effects during rapid maxillary expansion through combined in vivo", in vitro and finite element studies, 2008, pp.30, 437~448
- Tanne K, "Biomechanical effect of anteriorly directed extraoral forces on the craniofacial complex : a study using the finite element method", Am J Orthod Dentofacial Orthop, 95, pp.200~207 (1989)
- 경승현, "미니스크류 식립 부위로서 정중 구개봉합부 골의 두께에 관한 연구", 대한치과교정학회지, 34(1), pp.63~70 (2004), 대한치과교정학회
- Pirelli P, "A comparative light microscopic study of human midpalatal suture and periodontal ligament", Minerva Stomatol, 46, pp.429~433 (1997)
- Lee H, "Maxillary expansion in customized finite element method models", Am J Orthod Dentofacial Orthop, 136, pp.367~374 (2009)
- Lee SC, "Effect of bone-borne rapid maxillary expanders with and without surgical assistance on the craniofacial structures using finite element analysis", Am J Orthod Dentofacial Orthop, 145, pp.638~648 (2014)
- Liu S, "Effects of rapid maxillary expansion on the midpalatal suture : a systematic review", Eur J Orthod, 37, pp.651~655 (2015)
- MacGinnis M, "The effects of micro-implant assisted rapid palatal expansion(MARPE)on the nasomaxillary complex--a finite element method(FEM)analysis", Prog Orthod, 15, pp.52~ (2014)
- Lee RJ, "Effects of monocortical and bicortical mini-implant anchorage on boneborne palatal expansion using finite element analysis", Am J Orthod Dentofacial Orthop, 151, pp.887~897 (2017)
- 성의향, "Evaluation of the effects of miniscrew incorporation in palatal expanders for young adults using finite element analysis", 대한치과교정학회지, 48(2), pp.81~89 (2018), 대한치과교정학회