본문 바로가기
KERD
논문

3D 스캐닝 기법을 활용한 갱내채광 석회석 광산 광주의 안전성 분석

Stability Analysis of Pillar in Underground Limestone Mine Using 3D Scanning Techniques

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류자원공학

초록

본 연구에서는 갱내채광 광산을 대상으로 레이저 스캐너를 이용하여 점군 데이터를 획득하였다. 획득한 점군 데이터를 활용해 총 581개의 불연속면을 추출하여 통계처리 후, 불연속 균열망을 모사하여 수치해석 모델에 적용하였다. 수치해석 모델을 활용해 대형 채광장에 위치하는 두 개의 광주를 대상으로 안정성을 평가하였다. 안전율과 변위를 기준으로 평가한 결과, 안전율은 광주의 중심에서 측벽으로 진행할수록 낮아지는 경향을 보였으나 모두 최소안전율 1.0 이상으로 나타났다. 변위의 경우 측벽 일부 구역에서 9 mm의 최대변위가 발생하였지만, 광주의 규모에 비교하면 미미한수준으로 나타나 광주의 안정성이 확보되는 것으로 분석되었다.

Abstract

In this study, point-cloud data were obtained using a laser scanner for an underground limestone mine. A total of 581 discontinuities were extracted and statistically treated using the obtained point-cloud data, and a discrete fracture network was simulated and applied to the numerical analysis model. The stability was evaluated for two pillars located in large underground openings using the numerical analysis model. The evaluation results based on the safety factor and displacement showed that the safety factor tended to decrease as it progressed from the center of the pillar to the side wall. However, the pillars showed a minimum safety factor of 1.0 or higher. For the displacement, a maximum displacement of 9 mm occurred in a part of the pillar side wall. Nevertheless, the stability of the pillar was achieved, as it was insignificant compared to the size of the pillar.

참고문헌 (30)

  1. Brown, E.T., "Underground excavations in rock", pp.536~ (1980), CRC Press
  2. Dewez, T. J. B., "Facets: a clouldcompare plugin extract geological planes from unstructured 3d point cloulds", International Archives of the Photogrammetry, Remote Sensing & Spatial Information Sciences, 4, pp.799~804 (2016)
  3. Einstein, H.H., "Probabilistic and statistical methods in engineering geology", Rock Mechanics & Rock Engineering, 16(1), pp.39~72 (1983)
  4. Fisher, R.A., "Dispersion on a sphere", Proceeding of the Royal Society of London. Series A. Mathematical and Physical Sciences, 217(1130), pp.295~305 (1953)
  5. Itasca Consulting Group Inc., "3DEC user manual", ~ (2017)
  6. Kasperski, J., "Application of a terrestrial laser scanner (TLS) to the study of the Séchilience Landslide (lsère, France)", Remote Sensing, 2(12), pp.2785~2802 (2010)
  7. 김치환, "LIDAR를 이용한 대규모 암반 절리면의 거칠기 측정", 터널과 지하공간, 19(1), pp.52~63 (2009), 한국암반공학회
  8. Kim, D.H., "Stability analysis of underground mines considering the hydro-mechanical characteristics of fractured rockmass", PhD, pp.2021
  9. 김동휘, "갱내 채광 광산 안정성에 영향을 미치는 인자 분석", 한국자원공학회지, 58(1), pp.75~84 (2021), 한국자원공학회
  10. 김용휘, "풍촌층 상부 층준의 고품위 석회석 동정을 위한 SWIR 적용", 자원환경지질, 49(5), pp.335~347 (2016), 대한자원환경지질학회[DOI]
  11. Kline, R.B., "Principles and practice of structural equation modeling", pp.534~ (2015), Guilford publications
  12. Kukutsch, R., "Use of 3d laser scanner technology to monitor coal pillar deformation", Proceeding. of the 16th Coal Operators Conference, Mining Engineering, pp.99~107 (2016), University of Wollongong
  13. 이철규, "Mohr-Coulomb 파괴접근도 방법을 이용한 비대칭 분기부 암반필러의 안정성 평가", 한국지반신소재학회 논문집, 15(4), pp.17~23 (2016), 한국지반신소재학회[DOI]
  14. 이수득, "LIDAR를 이용한 삼차원 점군 데이터의 삼각망 구성 방법 및 샘플링에 따른 암반 불연속면 방향 검출에 관한 연구", 터널과 지하공간, 26(1), pp.46~58 (2016), 한국암반공학회
  15. 이수득, "LIDAR를 이용한 암반 절리면의 거칠기 측정에 관한 연구", 터널과 지하공간, 27(1), pp.58~68 (2017), 한국암반공학회[DOI]
  16. 이승중, "LIDAR를 활용한 지하광산의 안정성 분석에 관한 연구", 터널과 지하공간, 27(6), pp.406~421 (2017), 한국암반공학회[DOI]
  17. Melosh, H.J., "Mechanics of graben formation in crustal rocks: A finite element analysis", Journal. of Geophysical Research: Solid Earth, pp.13961~13973 (1989)
  18. Monsalve, J. J., "Application of laser scanning for rock mass characterization and discrete fracture network generation in an underground limestone mine", International Journal of Mining Science and Technology, 29(1), pp.131~137 (2019)
  19. 노유송, "3D 스캐너를 이용한 지하공동의 굴진장 및 여굴 평가 기초연구", 화약 발파, 33(4), pp.1~6 (2015), 대한화약발파공학회
  20. Oppikofer, T., "Characterization and monitoring of the Åknes rockslide using terrestrial laser scanning", Natural Hazards and Earth System Sciences, 9(3), pp.1003~1019 (2009)
  21. 박정찬, "DFN 모델과 스미어드 균열 모델을 이용한 불연속 암반의 3차원 수리해석", 터널과 지하공간, 29(5), pp.318~331 (2019), 한국암반공학회[DOI]
  22. 박준규, "광산관리와 채굴계획 수립을 위한 레이저스캐너의 활용", 예술인문사회 융합 멀티미디어 논문지, 7(6), pp.693~700 (2017), 사단법인 인문사회과학기술융합학회[DOI]
  23. 박준규, "토털스테이션과 3D 레이저 스캐너에 의한 광산공간정보 구축", 한국산학기술학회논문지, 20(3), pp.520~525 (2019), 한국산학기술학회[DOI]
  24. 박선현, "3D Laser Scanner를 이용한 암반사면의 절리방향 측정의 신뢰성에 관한 연구", 터널과 지하공간, 25(1), pp.97~106 (2015), 한국암반공학회[DOI]
  25. Priest, S.D., "Discontinuity analysis for rock engineering", pp.274~ (1993), Chapman & Hall
  26. Rosser, N. J., "Terrestrial laser scanning for monitoring the process of hard rock coastal clifferosion", Quarterly Journal of Engineering Geology and Hydrogeology, 38(4), pp.363~375 (2005)
  27. Schürch, P., "Detection of surface change in complex topography using terrestrial laser scanning: application to the lllgraben debris-flow channel", Earth surface Processes and Landforms, 36(14), pp.1847~1859 (2011)
  28. Slaker, B.A., "Monitoring underground mine displacement using photogrammetry and laser scanning", PhD, pp.2015
  29. A study on the safety and environmental control of underground opening in limestone quarries, "Sunwoo, C.", 121~, pp.KR-03 (2004)
  30. "Trimble" (2021)[URL]

관련 논문AI추천

이 간행물의 다른 논문 (8건)