Analysis of dismantling process and disposal cost of waste RVCH
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
During the operation of a nuclear power plant (NPP), the waste reactor vessel closure head (RVCH) that is replaced owing to design or manufacturing defects is buried in a designated area or temporarily stored in a radiation shielding facility within the NPP. In such cases, storing it for extended periods proves a challenge owing to space constraints in the power plant and a safety risk associated with radiation exposure; therefore, dismantling it quickly and safely is crucial. However, not much research has been done on the dismantling of the RVCH in an operational power plant. This study proposes a dismantling process based on the radioactive contamination level measured for the Kori #1 RVCH, which is currently being discarded and stored, and examines the decontamination and cutting according to this process. In addition, the amount of secondary waste and dismantling cost are evaluated, and the dismantling effect of the reactor closure head is analyzed.
Abstract
During the operation of a nuclear power plant (NPP), the waste reactor vessel closure head (RVCH) that is replaced owing to design or manufacturing defects is buried in a designated area or temporarily stored in a radiation shielding facility within the NPP. In such cases, storing it for extended periods proves a challenge owing to space constraints in the power plant and a safety risk associated with radiation exposure; therefore, dismantling it quickly and safely is crucial. However, not much research has been done on the dismantling of the RVCH in an operational power plant. This study proposes a dismantling process based on the radioactive contamination level measured for the Kori #1 RVCH, which is currently being discarded and stored, and examines the decontamination and cutting according to this process. In addition, the amount of secondary waste and dismantling cost are evaluated, and the dismantling effect of the reactor closure head is analyzed.
참고문헌 (24)
- J. Gorman, "PWR reactor vessel alloy 600issues", Vessel Code, 3(44) (2009), Companion Guide ASME Boiler Press
- Internal Atomic Energy Agency, "Heavy Component Replacement in Nuclear Power Plants: Experience and Guidelines" (2008), IAEA
- The Management of Large Components from Decommissioning to Storage and Disposal, Radioactive Waste Management, "R.W.M. Committee", Nuclear energy agency, ~, pp.NEA (2012), RWM[DOI]
- D.M. Wheeler, "Reactor Pressure Vessel Head Packaging and Disposal", WM2003 Conference, pp.23~27 (2003)
- 현동준, "EVALUATION METHODOLOGY OF REMOTE DISMANTLING EQUIPMENT FOR REACTOR PRESSURE VESSEL IN DECOMMISSIONING PROJECT", Journal of Nuclear Fuel Cycle and Waste Technology, pp.83~92 (2013), 한국방사성폐기물학회[DOI]
- P. Segerud, "Latest experience from jose Cabrera reactor vessel dismantling project - 15214", WM2015 Conference (2015)
- K.Y. Suk, "A Study on the Alternative Reducing Measure and Decommissioning Cost of Large Radwaste Materials in Kori Unit1 Based on the Radioactivity Data of Steam Generator Replacement in Korea", Master, pp.2020
- U. J. Choi, "Evaluation on radioactive waste disposal amount of Kori unit 1 reactor vessel considering cutting and packaging methods", J. Nucl. Fuel Cycle Waste Tech, 14, pp.1231~1234 (2016)
- H.J. Kim, "A Study on the Review of Concrete Waste Generated by Decommissioning of Nuclear Power Plant", Transactions of the Korean Nuclear Society Virtual Spring Meeting (2020)
- Korea Nuclear Safety Commission, "Regulation on Radioactive Waste Classification and Self-Disposal Standard", Notice No. 2020-6, ~ (2020)
- WAste Comprehensive Information Database, 2.6, WACID), "Korea Institute of Nuclear Safety", ~ (2022)
- 최유정, "고리 1호기 원자로 압력용기 절단과 포장 방법에 따른 처분 물량 산정", Journal of Nuclear Fuel Cycle and Waste Technology, 14(2), pp.123~134 (2016), 한국방사성폐기물학회
- H.E. Coules, "Measurement of the residual stresses in a PWR control rod drive mechanism nozzle", Nucl. Eng. Des, 333, pp.16~24 (2018)
- H.D. Sohn, "The study for activation evaluation on activated structures in nuclear power plant with 40 Years operation history", Ann. Nucl. Energy, 141, pp.107305~ (2020)
- 정현철, "In-Situ 측정법을 이용한 고리 원자로 방사선원항 평가", Journal of Nuclear Fuel Cycle and Waste Technology, 12(2), pp.171~178 (2014), 한국방사성폐기물학회[DOI]
- H.S. Lee, "Radiation safety management for replacement of reactor head of Kori unit 1", 2014 ISOE Asian ALARA Symp, pp.23~25 (2014)
- 송종순, "원전 제염기술 및 해외경험 분석을 통한 1차 계통 제염 적용 연구", Journal of Nuclear Fuel Cycle and Waste Technology, 14(1), pp.45~55 (2016), 한국방사성폐기물학회[DOI]
- Dismantling Techniques, Decontamination Techniques, Dissemination of Best Practice, Experience and Know-How, Final Activity Report, "Co-ordination Network on Decommissioning of Nuclear Installations", ~ (2009)
- Li Lin, "The Potential role of high-power lasers in nuclear decommissioning", Nucl. Energy, 41, pp.397~407 (2002)
- 문제권, "532 nm 파장의 큐스위치 Nd:YAG 레이저를 이용한 스테인리스 스틸 표면 제염특성", Journal of Nuclear Fuel Cycle and Waste Technology, 8(3), pp.181~188 (2010), 한국방사성폐기물학회
- Remote Handling Techniques in Decommissioning, "R.W.M. Committee", Nuclear energy agency, ~, pp.NEA (2011), RWM[DOI]
- G.R. Lee, "Evaluation of Metal Cutting Technologies for Decommissioning of Nuclear Power Plants", Transactions of the Korean Nuclear Society Spring Meeting (2019)
- 홍윤정, "자체처분 대상 방사성폐기물 처분 사례 연구", 방사선산업학회지, 15(1), pp.85~91 (2021), (사)한국방사선산업학회[DOI]
- "Regulations on the Calculation Standards for Radioactive Waste Management Cost and Spent Nuclear Fuel Management Charge", Ministry of Trade, Industry and Energy Notice No. 2022-11, ~