Leachability of lead, cadmium, and antimony in cement solidified waste in a silo-type radioactive waste disposal facility environment
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The waste acceptance criteria for heavy metals in mixed waste should be developed by reflecting the leaching behaviors that could highly depend on the repository design and environment surrounding the waste. The current standards widely used to evaluate the leaching characteristics of heavy metals would not be appropriate for the silo-type repository since they are developed for landfills, which are more common than a silo-type repository. This research aimed to explore the leaching behaviors of cementitious waste with Pb, Cd, and Sb metallic and oxide powders in an environment simulating a silo-type radioactive waste repository. The Toxicity Characteristic Leaching Procedure (TCLP) and the ANS 16.1 standard were employed with standard and two modified solutions: concrete-saturated deionized and underground water. The compositions and elemental distribution of leachates and specimens were analyzed using an inductively coupled plasma optical emission spectrometer (ICP-OES) and energydispersive X-ray spectroscopy combined with scanning electron microscopy (SEM-EDS). Lead and antimony demonstrated high leaching levels in the modified leaching solutions, while cadmium exhibited minimal leaching behavior and remained mainly within the cement matrix. The results emphasize the significance of understanding heavy metals' leaching behavior in the repository's geochemical environment, which could accelerate or mitigate the reaction.
Abstract
The waste acceptance criteria for heavy metals in mixed waste should be developed by reflecting the leaching behaviors that could highly depend on the repository design and environment surrounding the waste. The current standards widely used to evaluate the leaching characteristics of heavy metals would not be appropriate for the silo-type repository since they are developed for landfills, which are more common than a silo-type repository. This research aimed to explore the leaching behaviors of cementitious waste with Pb, Cd, and Sb metallic and oxide powders in an environment simulating a silo-type radioactive waste repository. The Toxicity Characteristic Leaching Procedure (TCLP) and the ANS 16.1 standard were employed with standard and two modified solutions: concrete-saturated deionized and underground water. The compositions and elemental distribution of leachates and specimens were analyzed using an inductively coupled plasma optical emission spectrometer (ICP-OES) and energydispersive X-ray spectroscopy combined with scanning electron microscopy (SEM-EDS). Lead and antimony demonstrated high leaching levels in the modified leaching solutions, while cadmium exhibited minimal leaching behavior and remained mainly within the cement matrix. The results emphasize the significance of understanding heavy metals' leaching behavior in the repository's geochemical environment, which could accelerate or mitigate the reaction.
참고문헌 (30)
- Q. Ling, "Spatial distribution and environmental risk assessment of heavy metals identified in soil of a decommissioned uranium mining area", Hum. Ecol. Risk Assess, 26(5), pp.1149~1163 (2020)
- J. C. Wilson, "Illustrative assessment of human health issues arising from the potential release of chemotoxic substances from a generic geological disposal facility for radioactive waste", J. Radiol. Prot, 31(4), pp.411~ (2011)
- Report on a Workshop on Toxicants Other than Radionuclides in the Context of Geological Disposal of Radioactive Wastes, "M. Thorne", ~ (2016)
- RIN 2050_AE45,
- H. Van der Sloot, "Comparison of the characteristic leaching behavior of cements using standard (EN 196-1) cement mortar and an assessment of their long-term environmental behavior in construction products during service life and recycling", Cement Concr. Res, 30(7), pp.1079~1096 (2000)
- MANAGEMENT OF RADIOACTIVE MIXED WASTES IN COMMERCIAL LOW-LEVEL WASTES, "C. R. Kenpf", Department of Nuclear Energy: Brookhaven National Laboratory Upton, ~, pp.U973
- M.o. Environment, "ENFORCEMENT DECREE OF THE WASTES CONTROL ACT, ADDENDA 9, Installation Standards for Waste Disposal Facilities or Recycling Facilities", ~ (2022)
- "ENFORCEMENT DECREE OF THE WASTES CONTROL ACT", M.o, Environment, ~ (2022)
- Safety Analysis Report (SAR) of Low and Intermediate Level Radioactive Waste Disposal Facility, "K.R.W. Agency", ~ (2009)
- H. Byeon, "Structural stability of stacked disposal containers in silo-type low-and intermediate-level waste repository under weight of backfilling materials", Tunn. Undergr. Space Technol, 133, pp.104924~ (2023)
- 변형진, "Statistical analysis of effects of test conditions on compressive strength of cement solidified radioactive waste", Nuclear Engineering and Technology, 55(3), pp.876~883 (2023), 한국원자력학회[DOI]
- 변형진, "Structural Stability Analysis of Waste Packages Containing Low- and Intermediate-Level Radioactive Waste in a Silo-type Repository", Nuclear Engineering and Technology, 53(5), pp.1524~1533 (2021), 한국원자력학회[DOI]
- C. E. Halim, "Evaluating the applicability of a modified toxicity characteristic leaching procedure(TCLP)for the classification of cementitious wastes containing lead and cadmium", J. Hazard Mater, 103(1-2), pp.125~140 (2003)
- Y. Cui, "pH-dependent leaching characteristics of major and toxic elements from red mud", Int. J. Environ. Res. Publ. Health, 16(11), pp.2046~ (2019)
- Q. Wang, "Leaching characteristics of heavy metals in MSW and bottom ash co-disposal landfills", J. Hazard Mater, pp.416~ (2021)
- B. S. Crannell, "Heavy metal stabilization in municipal solid waste combustion bottom ash using soluble phosphate", Waste Manag, 20(2), pp.135~148 (2000)
- V. Tsiridis, "Application of leaching tests for toxicity evaluation of coal fly ash", Environ. Toxicol, 21, pp.409~416 (2006)
- H. Lu, "Leaching of metals from cement under simulated environmental conditions", J. Environ. Manag, 169, pp.319~327 (2016)
- Wilson, J., "Issues Affecting the Assessment of Impacts of Disposal of Radioactive and Hazardous Waste"
- O. Holm, "Heavy Metals in Waste" (2002), European Commission
- F. Glasser, "Handbook of Advanced Radioactive Waste Conditioning Technologies", pp.67~135 (2011), Elsevier
- Z. Drace, "The behaviours of cementitious materials in long term storage and disposal: an overview of results of the IAEA coordinated research project", MRS Proceedings, pp.1193~ (2009)
- Methods of Testing Cements Determination of Strength, 679, "K. Iso", Korean Standards Association, ~ (2016)
- "SW-846 Test Method 1311, Toxicity Characteristic Leaching Procedure", U. EPA, ~ (1992)
- Measurement of the Leachability of Solidified Low-Level Radioactive Wastes by A Short-Term Test Procedure, "A.N.S. Institute", ~, pp.ANS-16.1-2017 (2017)
- C. A. Johnson, "Leaching behaviour and solubility d controlling solid phases of heavy metals in municipal solid waste incinerator ash", Waste Manag, 16(1), pp.129~134 (1996)
- X. D. Li, "Heavy metal speciation and leaching behaviors in cement based solidified", stabilized waste materials, 2001, pp.82(3), 215~230
- "Definition of Hazardous Waste, in 40 CFR 261.3", U. EPA, ~
- "Universal Treatment Standards., in 40 CFR 268.48", U. EPA, ~
- B. I. El-eswed, "Chemical evaluation of immobilization of wastes containing Pb, Cd, Cu and Zn in alkali-activated materials: a critical review", J. Environ. Chem. Eng, 8(5), pp.104194~ (2020)