Iron hydrolysis and lithium uptake on mixed-bed ion exchange resin at alkaline pH
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The use of ion exchange resins to remove ionic impurities from solution is prevalent in industrial process systems, including in the primary heat transport system (PHTS) purification circuit of nuclear power plants. Despite its extensive use in the nuclear industry, our general understanding of ion exchange cannot fully explain the complex chemistry in ion exchange beds, particularly when operated at or near their saturation limit. This work investigates the behaviour of mixed-bed ion exchange resin, saturated with species representative of corrosion products in a CANDU (Canadian Deuterium Uranium) reactor PHTS, particularly with respect to iron chemistry in the resin bed and the removal of lithium ions from solution. Experiments were performed under deaerated conditions, analogous to normal PHTS operation. The results show interesting iron chemistry, suggesting the hydrolysis of cation resin bound ferrous species and the subsequent formation of either a solid hydrolysis product or the soluble, anionic Fe(OH)3 - .
Abstract
The use of ion exchange resins to remove ionic impurities from solution is prevalent in industrial process systems, including in the primary heat transport system (PHTS) purification circuit of nuclear power plants. Despite its extensive use in the nuclear industry, our general understanding of ion exchange cannot fully explain the complex chemistry in ion exchange beds, particularly when operated at or near their saturation limit. This work investigates the behaviour of mixed-bed ion exchange resin, saturated with species representative of corrosion products in a CANDU (Canadian Deuterium Uranium) reactor PHTS, particularly with respect to iron chemistry in the resin bed and the removal of lithium ions from solution. Experiments were performed under deaerated conditions, analogous to normal PHTS operation. The results show interesting iron chemistry, suggesting the hydrolysis of cation resin bound ferrous species and the subsequent formation of either a solid hydrolysis product or the soluble, anionic Fe(OH)3 - .
참고문헌 (28)
- W. Cook, "Essential CANDU" (2014), UNENE
- D. Lister, "Essential CANDU" (2014), UNENE
- O. Palazhchenko, "Heat transfer add-on to the UNB-CNER CANDU-6 PHT system material transport model", J. Power Plant Chem, 22(6), pp.262~273 (2020)
- O. Palazhchenko, "Update on predicting RIHT using the UNB-CNER CANDU-6 PHT system model", J. Power Plant Chem, 23(3), pp.122~131 (2021)
- R. E. Mesmer, "Thermodynamics of ionization of D2O and D2PO4-", J. Solut. Chem, 7(12), pp.901~913 (1978)
- J. Crittenden, "MWH's Water Treatment: Principles and Design", pp.1277~1279 (2012), John Wiley & Sons, Inc
- S. D. Faust, "Chemistry of Water Treatment", pp.424~425 (1983), Butterworth Publishers
- L. Qui, "Lithium adsorption on magnetite, lepidocrocite, and maghemite at elevated temperatures", Nucl. Sci. Eng, 179, pp.199~210 (2015)
- S. Suryanarayan, "Lithium control during normal operation", International Conference on Water Chemistry of Nuclear Reactor Systems (Nuclear Plant Chemistry Conference) (2010)
- H. Cady, "The determination of the formulas of aqueous ruthenium (III) species by means of ion-exchange resin: Ru⁺, RuCl2⁺, and RuCl₂", J. Am. Chem. Soc, 80(11), pp.2646~2652 (1959)
- E. Sikora, "Application of ion-exchange resin beads to produce magnetic adsorbents", Chem. Pap, 75(11), pp.1187~1195 (2021)
- E.A. Tokar, "Decontamination of spent ion exchange resins contaminated with iron-oxide deposits using mineral acid solutions", Nuclear Engineering and Technology, 53(9), pp.2918~2925 (2021), 한국원자력학회[DOI]
- J. Sawicki, "Depth distribution and chemical form of iron in low cross-linked crud-removing resin beds", Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms, 142(1-2), pp.122~132 (1998)
- K. Otoha, "Crud removal performance with ion exchange resins in BWR plants", J. Nucl. Sci. Technol, 33(1), pp.52~61 (1996)
- W. Rudolph, "Raman spectroscopic investigation of aqueous FeSO₄ in neutral and acidic solutions from 25 C to303 C : inner-and outer-sphere complexes", J. Solut. Chem, 26(8), pp.757~777 (1997)
- J. Mehlig, "Spectrophotometric determination of iron with o-phenanthroline and with nitro-o-phenanthroline", Indus. Eng. Chem. Analyt. Edition, 14(11), pp.869~871 (1942)
- D. Caldwell, "Colorimetric determination of iron in water with ophenanthroline", Am. Water Works Associat, 38(6), pp.727~730 (1946)
- S. Smith, "Solubility of lithium carbonate at elevated temperatures", J. Chem. Eng. Data, 16(1), pp.74~75 (1971)
- A. E. Harvey, "Simultaneous spectrophotometric determination of iron(II) and total iron with 1,10-phenanthroline", Anal. Chem, 27(1), pp.26~29 (1955)
- D. Barber, "Water Chemistry of Nuclear Reactor Systems 5", pp.257~262 (1989), British Nuclear Energy Society
- P. Tremaine, "The solubility of magnetite and the hydrolysis and oxidation of Fe2⁺ in water to 300 ℃", J. Solut. Chem, 9, pp.415~442 (1980)
- R.J. Lemire, "Chemical Thermodynamics, vol. 13a", pp.125~137 (2013), Organization for Economic Co-operation and Development (OECD)
- D. Miller, "Anion structural effects on interaction of rare earth element ions with Dowex 50W X8 cation exchange resin", J. Rare Earths, 36, pp.879~890 (2018)
- T. Kimura, "Comparative study on the hydration states of Cm(III) and Eu(III) in solution and in cation exchange resin", J. Alloys Compd, 271-273, pp.719~722 (1998)
- I. Rhee, "Binary and ternary cation exchange on strong acid cation exchange resin involving Na, Mg, and Zn in single and binary backgrounds of chloride, perchlorate, and sulfate", Langmuir, 15, pp.6875~6883 (1999)