Failure simulation of nuclear pressure vessel under severe accident conditions: Part II – Failure modeling and comparison with OLHF experiment
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper proposes strain-based failure model of A533B1 pressure vessel steel to simulate failure, followed by application to OECD lower head failure (OLHF) test simulation for experimental validation. The proposed strainbased failure model uses simple constant and linear functions based on physical failure modes with the critical strain value determined either using the lower bound of true fracture strain or using the average value of total elongation depending on the temperature. Application to OECD Lower Head Failure (OLHF) tests shows that progressive deformation, failure time and failure location can be well predicted.
Abstract
This paper proposes strain-based failure model of A533B1 pressure vessel steel to simulate failure, followed by application to OECD lower head failure (OLHF) test simulation for experimental validation. The proposed strainbased failure model uses simple constant and linear functions based on physical failure modes with the critical strain value determined either using the lower bound of true fracture strain or using the average value of total elongation depending on the temperature. Application to OECD Lower Head Failure (OLHF) tests shows that progressive deformation, failure time and failure location can be well predicted.
참고문헌 (20)
- OECD Lower Head Failure Project Final Report, "L. L. Humphries", Sandia National Laboratories, 87185~ (2002)
- 박의균, "Failure simulation of nuclear pressure vessel under severe accident conditions: Part I - Material constitutive modeling", Nuclear Engineering and Technology, 55(11), pp.4146~4158 (2023), 한국원자력학회[DOI]
- T. H. Lee, "Bottom-mounted nozzle failure modes of a nuclear reactor pressure vessel under severe accident conditions", Key Eng. Mater, 297, pp.1652~1658 (2005)
- Severe accident condition modeling in PWR environment: creep rupture modeling, "F.W. Brust", Am. Soc. Mech. Eng. Press, ~, pp.PVP, 2013, 55638. V01AT01A054 (2013)
- 김태현, "STRUCTURAL ASSESSMENT OF RPV UNDER MULTI-LAYERED CORIUM FORMATION CONDITIONS", Nuclear Engineering and Technology, 47(3), pp.351~361 (2015), 한국원자력학회
- 이연주, "노심용융사고 시 관통노즐이 제거된 원자로용기 하부헤드의 구조 건전성 평가", 한국전산구조공학회논문집, 27(3), pp.191~198 (2014), 한국전산구조공학회[DOI]
- J. Arndt, "Failure assessment methodologies for pressureretaining components under severe accident loading", Sci. Technol. Nucl. Install, 2012 (2012)
- J. F. Mao, "Creep deformation and damage behavior of reactor pressure vessel under core meltdown scenario", Int. J. Pres. Ves. Pip, 139, pp.107~116 (2016)
- V. Koundy, "Progress on PWR lower head failure predictive models", Nucl. Eng. Des, 238(9), pp.2420~2429 (2008)
- Lower Head Failure Experiments and Analyses, "T. Y. Chu", 98~2047, pp.vol. 5582, NUREG (1998), CR-
- Y. Takahashi, "Modelling of rupture ductility of metallic materials for wide ranges of temperatures and loading conditions, part I: development of basic model", Mater. A. T. High. Temp, 37(6), pp.357~369 (2020)
- J. R. Rice, "On the ductile enlargement of voids in triaxial stress fields", J. Mech. Phys. Solid, 17(3), pp.201~217 (1969)
- Y. Takahashi, "Unified constitutive modeling of three alloys under a wide range of temperature", Int. J. Pres. Ves. Pip, 172, pp.166~179 (2019)
- Development of accurate inelastic analysis models for materials constituting penetrations in reactor vessel, "Y. Takahashi", Denryoku Chuo Kenkyusho Hokoku, 1~4 (2015)
- Light Water Reactor Lower Head Failure Analysis, "J. L. Rempe", Nuclear Regulatory Commission, ~, pp.No. NUREG (1993), CR-5642; EGG-2618
- ABAQUS, "Abaqus User’s Manual Version 2019" (2019), Dassault Syst`emes Simulia Corp
- 박장민, "Multi-dimensional finite element analyses of OECD lower head failure tests", Nuclear Engineering and Technology, 54(12), pp.4522~4533 (2022), 한국원자력학회[DOI]
- L. Nicolas, "Results of benchmark calculations based on OLHF-1 test", Nucl. Eng. Des, 223(3), pp.263~277 (2003)
- P. Gao, "Development of PWR lower head failure model for severe accident analysis", Nucl. Eng. Des, 403, pp.112142~ (2023)
- V. Koundy, "Study of tearing behaviour of a PWR reactor pressure vessel lower head under severe accident loadings", Nucl. Eng. Des, 238(9), pp.2411~2419 (2008)