Failure simulation of nuclear pressure vessel under severe accident conditions: Part I - Material constitutive modeling
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper proposes a combined plastic and creep constitutive model of A533B1 pressure vessel steel to simulate progressive deformation of nuclear pressure vessels under severe accident conditions. To develop the model, recent tensile test data covering a wide range of temperatures (from RT to 1,100 ◦C) and strain rates (from 0.001%/s to 1.0%/s) was used. Comparison with experimental data confirms that the proposed combined plastic and creep model can well reflect effects of temperature and strain rate on tensile behaviour up to failure. In the companion paper (Part II), the proposed model will be used to simulate OECD lower head failure (OLHF) test data.
Abstract
This paper proposes a combined plastic and creep constitutive model of A533B1 pressure vessel steel to simulate progressive deformation of nuclear pressure vessels under severe accident conditions. To develop the model, recent tensile test data covering a wide range of temperatures (from RT to 1,100 ◦C) and strain rates (from 0.001%/s to 1.0%/s) was used. Comparison with experimental data confirms that the proposed combined plastic and creep model can well reflect effects of temperature and strain rate on tensile behaviour up to failure. In the companion paper (Part II), the proposed model will be used to simulate OECD lower head failure (OLHF) test data.
참고문헌 (20)
- OECD Lower Head Failure Project Final Report, "L.L. Humphries", Sandia National Laboratories, 87185~81139 (2002)
- Fukushima Daiichi Accident Study (Status as of April 2012), "R. Gauntt", ~, pp.SAND2012-6173 (2012)
- Lower Head Failure Experiments and Analyses, "T. Y. Chu", 98~2047, pp.vol. 5582, NUREG (1998), CR-
- Structural Assessment of a Generic PWR1000 Reactor Vessel under IVR, "S. Jules", IVMR, ~ (2016)
- 이연주, "노심용융사고 시 관통노즐이 제거된 원자로용기 하부헤드의 구조 건전성 평가", 한국전산구조공학회논문집, 27(3), pp.191~198 (2014), 한국전산구조공학회[DOI]
- 김태현, "STRUCTURAL ASSESSMENT OF RPV UNDER MULTI-LAYERED CORIUM FORMATION CONDITIONS", Nuclear Engineering and Technology, 47(3), pp.351~361 (2015), 한국원자력학회
- J. F. Mao, "Creep deformation and damage behavior of reactor pressure vessel under core meltdown scenario", Int. J. Pres. Ves. Pip, 139, pp.107~116 (2016)
- T. H. Lee, "Bottom-mounted nozzle failure modes of a nuclear reactor pressure vessel under severe accident conditions", Key Eng. Mater, 297, pp.1652~1658 (2005)
- Severe accident condition modeling in PWR environment: creep rupture modeling, "F. W. Brust", Am. Soc. Mech. Eng. Press, ~, pp.PVP 55638 (2013). V01AT01A054 (2013)
- J. Arndt, "Failure assessment methodologies for pressureretaining components under severe accident loading", Sci. Technol. Nucl. Install (2012)
- V. Koundy, "Progress on PWR lower head failure predictive models", Nucl. Eng. Des, 238(9), pp.2420~2429 (2008)
- Y. Takahashi, "Unified constitutive modeling of three alloys under a wide range of temperature", Int. J. Pres. Ves. Pip, 172, pp.166~179 (2019)
- Project of Integrity Assessment of Flawed Components with Structural Discontinuity (IAF) Material Properties Data Book at High Temperature for Dissimilar Metal Welding in Reactor Pressure Vessel, "Japan Nuclear Energy Safety Organization", ~ (2013)
- Development of accurate inelastic analysis models for materials constituting penetrations in reactor vessel, "Y. Takahashi", Denryoku Chuo Kenkyusho Hokoku, 1~4 (2015)
- Y. Takahashi, "Modelling of rupture ductility of metallic materials for wide ranges of temperatures and loading conditions, part I: development of basic model", Mater. A. T. High. Temp, 37(6), pp.357~369 (2020)
- ABAQUS, "Abaqus User’s Manual Version 2019" (2019), Dassault Syst`emes Simulia Corp
- Light Water Reactor Lower Head Failure Analysis, "J. L. Rempe", Nuclear Regulatory Commission, ~, pp.No. NUREG (1993), CR-5642; EGG-2618
- 이봉상, "A practical power law creep modeling of alloy 690 SG tube materials", Nuclear Engineering and Technology, 53(9), pp.2953~2959 (2021), 한국원자력학회[DOI]
- Z. Gao, "Influence of phase transformation on the creep deformation mechanism of SA508 Gr.3 steel for nuclear reactor pressure vessels", J. Nucl. Mater, 519, pp.292~301 (2019)
- K. Lim, "Evaluation of an IVR-ERVC strategy for a high power reactor using MELCOR 2.1", Ann. Nucl. Energy, 109, pp.337~349 (2017)