Numerical simulation on in-vessel molten corium behavior with external vessel cooling using smoothed particle hydrodynamics
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The in-vessel retention through external reactor vessel cooling (IVR-ERVC) strategy is a key management strategy for early termination of a nuclear severe accident that can threaten the integrity of the reactor vessel. To simulate the physical phenomena of the molten corium, the smoothed particle hydrodynamic (SPH) method is utilized in this study. The SPH method is a Lagrangian computational fluid dynamic (CFD) method that can simulate multi-fluid stratification, turbulence, natural circulation, radiative heat transfer, thermal ablation, and crust formation. To address the external vessel cooling, it is coupled with a conventional 1-D nuclear system analysis method. The 1-D system analysis code can calculate the two-phase natural circulation of cooling water and the convective heat transfer on the external reactor vessel wall. These two simulation codes exchange the temperature and heat flux of the reactor vessel outer wall. This study numerically simulated the IVR-ERVC strategy for a Korean high-power reactor and compared it with the traditional lumped parameter method (LPM). Unlike LPM, this study provides localized detailed data about the thermal hydraulic behavior of molten corium and visualization of phenomena in the IVR-ERVC strategy. This enhances our understanding of the phenomena in IVR-ERVC strategy and introduces new perspectives.
Abstract
The in-vessel retention through external reactor vessel cooling (IVR-ERVC) strategy is a key management strategy for early termination of a nuclear severe accident that can threaten the integrity of the reactor vessel. To simulate the physical phenomena of the molten corium, the smoothed particle hydrodynamic (SPH) method is utilized in this study. The SPH method is a Lagrangian computational fluid dynamic (CFD) method that can simulate multi-fluid stratification, turbulence, natural circulation, radiative heat transfer, thermal ablation, and crust formation. To address the external vessel cooling, it is coupled with a conventional 1-D nuclear system analysis method. The 1-D system analysis code can calculate the two-phase natural circulation of cooling water and the convective heat transfer on the external reactor vessel wall. These two simulation codes exchange the temperature and heat flux of the reactor vessel outer wall. This study numerically simulated the IVR-ERVC strategy for a Korean high-power reactor and compared it with the traditional lumped parameter method (LPM). Unlike LPM, this study provides localized detailed data about the thermal hydraulic behavior of molten corium and visualization of phenomena in the IVR-ERVC strategy. This enhances our understanding of the phenomena in IVR-ERVC strategy and introduces new perspectives.
참고문헌 (31)
- A. Shams, "Status of computational fluid dynamics for in-vessel retention : challenges and achievements", Ann. Nucl. Energy, 135, pp.107004~ (2020)
- W. Ma, "In-vessel melt retention of pressurized water reactors : historical review and future research needs", Engineering, 2(1), pp.103~111 (2016)
- S. -H. Park, "Development of Lagrangian particle-based methodology for in-vessel retention and external reactor vessel cooling application", Department of Nuclear Engineering, pp.2021
- Final Report for the’Melt-Vessel Interactions’ Project. European Union R and TD Program 4th Framework, "B. Sehgal", Swedish Nuclear Power Inspectorate, ~ (1999)
- L. Zhang, "Natural convection heat transfer in corium pools : a review work of experimental studies", Prog. Nucl. Energy, 79, pp.167~181 (2015)
- Beuzet, E, "Corium-related improvements in the EDF version of MAAP code in the frame of severe accident studies", Proceedings of the 16th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, NURETH
- R. Le Tellier, "Transient stratification modelling of a corium pool in a LWR vessel lower head", Nucl. Eng. Des, 287, pp.68~77 (2015)
- F. Fichot, "Elaboration of a phenomena identification ranking table(PIRT)for the modelling of in-vessel retention", Ann. Nucl. Energy, 146, pp.107617~ (2020)
- G. -R. Liu, "Smoothed Particle Hydrodynamics: a Meshfree Particle Method" (2003), World scientific
- Y. B. Jo, "SOPHIA : development of Lagrangian-based CFD code for nuclear thermal-hydraulics and safety applications", Ann. Nucl. Energy, 124, pp.132~149 (2019)
- L. B. Lucy, "A numerical approach to the testing of the fission hypothesis", The astronomical journal, 82, pp.1013~1024 (1977)
- R. A. Gingold, "Smoothed particle hydrodynamics : theory and application to non-spherical stars", Mon. Not. Roy. Astron. Soc, 181(3), pp.375~389 (1977)
- J. J. Monaghan, "Smoothed particle hydrodynamics", Annu. Rev. Astron. Astrophys, 30, pp.543~574 (1992)
- S. -H. Park, "SPH for General Density Gradient Driven Flow", ~ (2019)
- J. J. Monaghan, "Simulating free surface flows with SPH", J. Comput. Phys, 110(2), pp.399~406 (1994)
- J. J. Monaghan, "Smoothed particle hydrodynamics", Rep. Prog. Phys, 68(8), pp.1703~ (2005)
- J. Smagorinsky, "General circulation experiments with the primitive equations : I. The basic experiment", Mon. Weather Rev, 91(3), pp.99~164 (1963)
- J. -J. Jeong, "Development of a multi-dimensional thermal-hydraulic system code, MARS 1.3. 1", Ann. Nucl. Energy, 26(18), pp.1611~1642 (1999)
- M. S. Song, "Numerical study on thermal-hydraulics of external reactor vessel cooling in high-power reactor using MARS-KS1. 5 code : CFD-aided estimation of natural circulation flow rate", Nucl. Eng. Technol, 54(1), pp.72~83 (2022)
- J. C. Chen, "Correlation for boiling heat transfer to saturated fluids in convective flow", Ind. Eng. Chem. Process Des. Dev, 5(3), pp.322~329 (1966)
- Y. -G. Lee, "Numerical evaluation of coolability limits of external reactor vessel cooling using an improved thermal-hydraulic system analysis code", Int. J. Energy Res (2023)
- C. W. Lee, "Multi-scale simulation of wall film condensation in the presence of non-condensable gases using heat structure-coupled CFD and system analysis codes", Nucl. Eng. Technol, 53(8), pp.2488~2498 (2021)
- J. Bonnet, "Thermal Hydraulic Phenomena in Corium Pools: the BALI Experiment" (1999)
- T. A. Kowalewski, "Freezing of water in a differentially heated cubic cavity", Int. J. Comput. Fluid Dynam, 11(3–4), pp.193~210 (1999)
- M. Giangi, "Natural convection during ice formation : numerical simulation vs. experimental results", Comput. Assist. Mech. Eng. Sci, 7(3), pp.321~342 (2000)
- K. Lim, "Evaluation of an IVR-ERVC strategy for a high power reactor using MELCOR 2. 1", Ann. Nucl. Energy, 109, pp.337~349 (2017)
- H. Esmaili, "Analysis of In-Vessel Retention and Ex-Vessel Fuel Coolant Interaction for AP1000", pp.4~21 (2004), Energy Research, Inc
- S. H. Park, "Development of multi-GPU–based smoothed particle hydrodynamics code for nuclear thermal hydraulics and safety : potential and challenges", Front. Energy Res, 8, pp.86~ (2020)
- Y. B. Jo, "SOPHIA : development of Lagrangian-based CFD code for nuclear thermal-hydraulics and safety applications", Ann. Nucl. Energy, 124, pp.132~149 (2019)
- M. Giangi, "Phase change problems with free convection : fixed grid numerical simulation", Comput. Visual Sci, 2, pp.123~130 (1999)
- T. A. Kowalewski, "Freezing of water in a differentially heated cubic cavity", Int. J. Comput. Fluid Dynam, 11(3–4), pp.193~210 (1999)