Applicability analysis of induction bending process to P91 piping of PGSFR by high-temperature fatigue test
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The application of the induction bending process in pipe fabrication is expanding across industries, significantly reducing leakage by minimizing welded sections in curved pipes. In this study, the applicability of the induction bending process to P91 bent pipes of PGSFR was analyzed, focusing on both material fatigue tests and structural fatigue tests for induction bent pipe at high temperatures. First, both high-cycle and low-cycle fatigue tests on specimens from the bent pipe were carried out at 550 ◦C to confirm that the fatigue properties meet the ASME Code’s fatigue requirements. Second, material constants for a Chaboche combined hardening model were identified by using the material test results and an inelastic finite element analysis of the P91 bent pipe were performed to determine the fatigue test load for structural test effectively. Lastly, a high-temperature fatigue test on the bent pipe structure was performed to assess its structural integrity and post-test non-destructive examination confirmed that no fatigue cracks developed, and thereby affirming the applicability of the P91 bent pipe.
Abstract
The application of the induction bending process in pipe fabrication is expanding across industries, significantly reducing leakage by minimizing welded sections in curved pipes. In this study, the applicability of the induction bending process to P91 bent pipes of PGSFR was analyzed, focusing on both material fatigue tests and structural fatigue tests for induction bent pipe at high temperatures. First, both high-cycle and low-cycle fatigue tests on specimens from the bent pipe were carried out at 550 ◦C to confirm that the fatigue properties meet the ASME Code’s fatigue requirements. Second, material constants for a Chaboche combined hardening model were identified by using the material test results and an inelastic finite element analysis of the P91 bent pipe were performed to determine the fatigue test load for structural test effectively. Lastly, a high-temperature fatigue test on the bent pipe structure was performed to assess its structural integrity and post-test non-destructive examination confirmed that no fatigue cracks developed, and thereby affirming the applicability of the P91 bent pipe.
참고문헌 (37)
- T. Behne, "A new bending technique for large-diameter pipe", IAMI, 22(1), pp.34~36 (1983)
- H. Asao, "Analysis in workability of pipe bending using high frequency induction heating", Proceedings of the 24th International Machine Tool Design and Research Conference, pp.97~104 (1983)
- H. Asao, "Numerical analysis of bending force in tube bending using frequency induction heating-investigation of metal forming local heating", J. J. JSTP, 28(313), pp.150~157 (1987)
- B.K. Hwang, "A study of mechanical properties of the high-frequency induction heating for using the hot pipe bending", The Korean Society for Technology of Plasticity, pp.406~409 (2010)
- "ISO 15590-1, Petroleum and Natural Gas Industries –induction Bends, Fittings and Flanges for Pipeline Transportation Systems – Part 1: Induction Bends", ISO, ~ (2001)
- Zuozhi Shao, "Bending technique and its CAD for pipes in power station", Proceeding of the CSEE, 19(6), pp.85~88 (1999)
- J.C. Vaillant, "T", P23, 24, 911 and 92: new grades for advanced coal-fired power plants—properties and experience, 2008, pp.85(1–2), 38~46
- R.L. Hipley, "Induction bent pipe in the offshore industry", Offshore Technology Conference (OnePetro), pp.351~353 (1982)
- Y. H. Joo, "A study on the deformation of OD 245㎜ offshore plant pipe by induction bending", Journal of the Korean Society of Manufacturing Process Engineers, 21(8), pp.72~78 (2022)
- J. Kondo, "The state of the art of induction bent pipe", The Fourth International Offshore and Polar Engineering Conference (OnePetro) (1994)
- H. Y. Chang, "Evaluation of design compatibility for induction heated bending pipes applied to safety related system in nuclear power plants", corrosion and protection, 12(1) (2013)
- H. W. Lee, "Optimum design of pipe bending based on high-frequency induction heating using dynamic reverse moment", Int. J. Precis. Eng. Manuf, 12(6), pp.1051~1058 (2011)
- J. S. Kim, "Investigation of residual stress distributions of induction heating bended austenitic stainless steel(316 series)piping", Transactions of the Korean Society of Mechanical Engineers A, 38(7), pp.809~815 (2014)
- J. S. Kim, "Proposal of residual stress mitigation in nuclear safety-related austenitic stainless steel TP304 pipe bended by local induction heating process via elastic-plastic finite element analysis", Nucl. Eng. Technol, 51(5), pp.1451~1469 (2019)
- Evaluation of Tensile Properties for TP316 Stainless Steel Pipe Bends Manufactured by High-Frequency Induction Heating Process, "S. Y. Lee", ~ (2013)
- M. Shin, "Effect of induction heat bending process on the corrosion properties of 316 stainless steel pipes for nuclear power plant", Corrosion Science and Technology, 13(3), pp.87~94 (2014)
- Mi Yeon Lee, "Evaluation of Mechanical Properties of SA312 TP316 and SA312TP304 Stainless Steels Pipe Bends Fabricated by Induction Bending", M.S, pp.2016
- M. Y. Lee, "Evaluation of Material Properties in the TP347Stainless Steel Pipe Bends Manufactured by Induction Bending", ~ (2015)
- J. Lee, "Low cycle fatigue behavior of hotbent 347 stainless steel in a simulated PWR water environment", J. Mech. Sci. Technol, 30(11), pp.4931~4936 (2016)
- K. T. Kim, "Effects of induction heat bending and heat treatment on the boric acid corrosion of low alloy steel pipe for nuclear power plants", Korean Journal of Metals and Materials, 54(11), pp.817~825 (2016)
- Y. S. Lee, "Fatigue characteristics of small radius pipe fabricated by pipe bending with induction local heating", Procedia Eng, 10, pp.3333~3338 (2011)
- J. Yoo, "Overall system description and safety characteristics of prototype Gen IV sodium cooled fast reactor in Korea", Nucl. Eng. Technol, 48(5), pp.1059~1070 (2016)
- "ASME Boiler and Pressure Vessel Code, Section III, Division 5", ASME, International, ~ (2021)
- N. H. Kim, "Applicability of the induction bending process to the P91 pipe of the PGSFR", Nucl. Eng. Technol, 53(5), pp.1580~1586 (2021)
- T. W. Na, "Validation of applicability of induction bending process to P91 piping of prototype gen-IV sodium-cooled fast reactor(PGSFR)", Nucl. Eng. Technol, 53(5), pp.1580~1586 (2023)
- "ASME Boiler and Pressure Vessel Code, Section II, Part A", ASME International, ~ (2017)
- "ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NB", ASME, International, ~ (2017)
- "ASME B16.9, Factory-Made Wrought Buttwelding Fittings", The American Society of Mechanical Engineers, ~ (2001)
- "PFI standard ES-24, Pipe Bending Methods, Tolerances, Process and Material Requirements", Pipe Fabrication Institute, ~ (2010)
- "ASTM A370, Standard Test Methods and Definitions for Mechanical Testing of Steel Products", ASTM International, ~ (2016)
- "ASTM Standard E466-21, Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials", ASTM International, ~ (2021)
- "ASTM E 606-04, Standard Practice for Strain-Controlled Fatigue Testing", ASTM International, ~ (2004)
- "NRIM Fatigue Data Sheet, No.78, Data Sheets on Elevated-Temperature", Timedependent Low-Cycle Fatigue Properties of ASTM A387 Grade 91 Steel Plate for Pressure Vessels, ~ (1993)
- J. L. Chaboche, "Mechanics of Solid Materials" (1990), Cambridge University Press
- M. Abdelkader, "A Comparative Study of the Chaboche and Bonder Viscoplastic Constitutive Theories for High Temperature Applications", Doctor, pp.1986
- Review of the Margins for ASME Code Fatigue Design Curve - Effects of Surface Roughness and Material Variability, "O.K. Chopra", NUREG, ~, pp.NUREG (2003), CR-6815
- O.K. Chopra, "Environmental Effects on Fatigue Crack Initiation in Piping and Pressure Vessel Steels", NUREG, ~, pp.NUREG (2001), CR-6717, ANL-00[DOI]