Effects of pulsed laser surface remelting on microstructure, hardness and lead-bismuth corrosion behavior of a ferrite/martensitic steel

키워드

참고문헌 (44)

1. O. Yeliseyeva, "Influence of temperature on the interaction mode of T91 and AISI 316L steels with PbeBi melt saturated by oxygen", Corrosion Sci, 50, pp.1672~1683 (2008)
2. C. Schroer, "Performance of 9%Cr steels in flowing lead-bismuth eutectic at 450 and 550
   C, and 106 mass%dissolved oxygen", Nucl. Eng. Des, 280, pp.661~672 (2014)
3. X. Gong, "Low cycle fatigue behavior of a modified 9Cre1Mo ferriticemartensitic steel in leadebismuth eutectic at 350
   C e effects of oxygen concentration in the liquid metal and strain rate", Corrosion Sci, 94, pp.377~391 (2015)
4. J. Liu, "Leadebismuth eutectic corrosion behaviors of ferritic", martensitic steels in low oxygen concentration environment, 2015, pp.84, 383~395
5. G. Müller, "Results of steel corrosion tests in flowing liquid Pb", Bi at 420-600
   C after 2000 h, 2002, pp.301, 40~46
6. M. Yurechko, "Steel T91 subjected to static stress in lead-bismuth eutectic at 450-550
   C and low oxygen concentration", J. Nucl. Mater, 512, pp.423~439 (2018)
7. Y. Chen, "Enhanced creep resistance of Y-bearing 9Cr ferritic", martensitic steel via vacuum casting technique, 2019, pp.8, 4588~4597
8. E. Miorin, "Al rich PVD protective coatings : a promising approach to prevent T91 steel corrosion in stagnant liquid lead", Surf. Coating. Technol, 377, pp.124890~ (2019)
9. Y. Dai, "FeCrAlY and TiN coatings on T91 steel after irradiation with 72MeV protons in flowing LBE", J. Nucl. Mater, 431, pp.66~76 (2012)
10. L. Chai, "Microstructural characterization and hardness variation of pure Ti surface-treated by pulsed laser", J. Alloys Compd, 741, pp.116~122 (2018)
11. J. Dai, "Characterization and correlation of microstructure and hardness of Tie6Ale4V sheet surface-treated by pulsed laser", J. Alloys Compd, 826, pp.154243~ (2020)
12. L. Chai, "Characterization of microstructure and hardness of a Zr-2. 5Nb alloy surface-treated by pulsed laser", Mater. Chem. Phys, 198, pp.303~309 (2017)
13. B. Mahmoudi, "Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd : YAG laser", Mater. Des, 31, pp.2553~2560 (2010)
14. G. Telasang, "Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel", Surf. Coating. Technol, 261, pp.69~78 (2015)
15. M. Moradi, "High power diode laser surface hardening of AISI 4130 : statistical modelling and optimization", Opt Laser. Technol, 111, pp.554~570 (2019)
16. X. Gong, "The role of oxide films in preventing liquid metal embrittlement of T91 steel exposed to liquid lead-bismuth eutectic", J. Nucl. Mater, 509, pp.401~407 (2018)
17. H. O. Nam, "Dissolved oxygen control and monitoring implementation in the liquid leadebismuth eutectic loop : HELIOS", J. Nucl. Mater, 376, pp.381~385 (2008)
18. A. Khorram, "Nd : YAG laser surface hardening of AISI 431 stainless steel : mechanical and metallurgical investigation", Opt Laser. Technol, 119, pp.105617~ (2019)
19. 장기남, "The effect of cooling rates on carbide precipitate and microstructure of 9CR-1MO oxide dispersion strengthened(ODS) steel", Nuclear Engineering and Technology, 51(1), pp.249~256 (2019), 한국원자력학회[DOI]
20. W. Yan, "Microstructural stability of 9-12%Cr ferrite", martensite heat-resistant steels, 2013, pp.7, 1~27
21. F. J. Humphreys, "Review Grain and subgrain characterisation by electron backscatter diffraction", J. Mater. Sci, 36, pp.3833~3854 (2001)
22. S. I. Wright, "A review of strain analysis using electron backscatter diffraction", Microsc. Microanal, 17, pp.316~329 (2011)
23. M. K. Alam, "Electron Backscatter Diffraction(EBSD)analysis of laser-cladded AISI 420 martensitic stainless steel", Mater. Char, 161, pp.110138~ (2020)
24. S. Morito, "The morphology and crystallography of lath martensite in alloy steels", Acta Mater, 54, pp.5323~5331 (2006)
25. E. Bouyne, "Use of EBSD technique to examine microstructure and cracking in a bainitic steel", Scripta Mater, 39, pp.295~300 (1998)
26. A. Guo, "An analysis of the microstructure of the heat-affected zone of an ultra-low carbon and niobiumbearing acicular ferrite steel using EBSD and its relationship to mechanical properties", Mater. Sci. Eng, 527, pp.6440~6448 (2010)
27. G. Nolze, "Irrational orientation relationship derived from rational orientation relationships using EBSD data", Cryst. Res. Technol, 43, pp.61~73 (2008)
28. C. C. Kinney, "The microstructure of lath martensite in quenched 9Ni steel", Acta Mater, 69, pp.372~385 (2014)
29. T. Karthikeyan, "Grain refinement to improve impact toughness in 9Cre1Mo steel through a double austenitization treatment", J. Nucl. Mater, 419, pp.256~262 (2011)
30. J. Zhang, "A review of steel corrosion by liquid lead and leadebismuth", Corrosion Sci, 51, pp.1207~1227 (2009)
31. R. L. Klueh, "Ferritic", martensitic steels for next-generation reactors, 2007, pp.371, 37~52
32. Z. Ye, "Oxidation mechanism of T91 steel in liquid lead-bismuth eutectic : with consideration of internal oxidation", Sci. Rep, 6, pp.35268~ (2016)
33. X. Zhou, "Phase transformation behavior and microstructural control of high-Cr martensitic", ferritic heat-resistant steels for power and nuclear plants : a review, 2015, pp.31, 235~242
34. Z. C. Cordero, "Six decades of the HallePetch effect e a survey of grain-size strengthening studies on pure metals", Int. Mater. Rev, 61, pp.495~512 (2016)
35. Y. Li, "Mechanical properties and microstructures of China low activation martensitic steel compared with JLF-1", J. Nucl. Mater, 367-370, pp.117~121 (2007)
36. X. Wu, "Heterogeneous materials : a new class of materials with unprecedented mechanical properties", Mater. Res. Lett, 5, pp.527~532 (2017)
37. M. G. Jiang, "Strong and ductile reduced activation ferritic", martensitic steel additively manufactured by selective laser melting, 2019, pp.7, 426~432
38. J. Xiao, "A refined oxidation mechanism proposed for ferritic-martensitic steels exposed to oxygen-saturated liquid lead-bismuth eutectic at 400
    C for 500 h", J. Nucl. Mater, 549, pp.152852~ (2021)
39. L. Martinelli, "Oxidation mechanism of a Fe-9Cr-1Mo steel by liquid PbeBi eutectic alloy(Part III)", Corrosion Sci, 50, pp.2549~2559 (2008)
40. A. L. Johnson, "Spectroscopic and microscopic investigation of the corrosion of 316", 316L stainless steel by leadebismuth eutectic(LBE)at elevated temperatures : importance of surface preparation, 2004, pp.328, 88~96
41. Q. Shi, "Oxidation behavior of ferritic", martensitic steels in stagnant liquid LBE saturated by oxygen at 600
    C, 2015, pp.457, 135~141
42. G. Müller, "Investigation on oxygen controlled liquid lead corrosion of surface treated steels", J. Nucl. Mater, 278, pp.85~95 (2000)
43. V. Tsisar, "Characterization of corrosion phenomena and kinetics on T91 ferritic", martensitic steel exposed at 450 and 550
    C to flowing Pb-Bi eutectic with 10"7 mass% dissolved oxygen, 2017, pp.494, 422~438
44. V. Tsisar, "Corrosion interaction of 9%Cr ferritic", martensitic steels at 450 and 550
    CWith flowing Pb eBiEutectic containing 107 mass % dissolved oxygen, 2019, pp.5, ~

관련 논문AI추천