Effect of surface quality on hydrogen/helium irradiation behavior in tungsten
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
As the plasma facing material in the nuclear fusion reactor, tungsten has to bear the irradiation impact ofhigh energy particles. The surface quality of tungsten may affect its irradiation resistance, and even affectthe service life of fusion reactor. In this paper, tungsten samples with different surface quality werepolished by mechanical processing, subsequently conducted by D2þ implantation and thermal desorption. D2þ implantation was performed at room temperature (RT) with the irradiation dose of 1 1021D2þ/m2 by 5 keV D2þ ions, and thermal desorption spectroscopy measurements were done from RT to900 K. In addition, He irradiation was also performed by 50 eV Heþ ions energy with the fluxes of5.5 1021 m2s1 and 1.5 1022 m2s1, respectively. Results reveal that the hydrogen/helium irradiation behavior are both related to surface quality. Samples with high surface quality has superior D2þretention behavior with less D2 retained after implantation. However, such samples are more likely togenerate fuzzes on the surface after helium irradiation. Different morphologies (smooth, wavy, pyramids)after helium irradiati
Abstract
As the plasma facing material in the nuclear fusion reactor, tungsten has to bear the irradiation impact ofhigh energy particles. The surface quality of tungsten may affect its irradiation resistance, and even affectthe service life of fusion reactor. In this paper, tungsten samples with different surface quality werepolished by mechanical processing, subsequently conducted by D2þ implantation and thermal desorption. D2þ implantation was performed at room temperature (RT) with the irradiation dose of 1 1021D2þ/m2 by 5 keV D2þ ions, and thermal desorption spectroscopy measurements were done from RT to900 K. In addition, He irradiation was also performed by 50 eV Heþ ions energy with the fluxes of5.5 1021 m2s1 and 1.5 1022 m2s1, respectively. Results reveal that the hydrogen/helium irradiation behavior are both related to surface quality. Samples with high surface quality has superior D2þretention behavior with less D2 retained after implantation. However, such samples are more likely togenerate fuzzes on the surface after helium irradiation. Different morphologies (smooth, wavy, pyramids)after helium irradiati
참고문헌 (32)
- Y. X. Wan, "Overview of the present progress and activities on the CFETR", Nucl. Fusion, 57, pp.102009~ (2017)
- S. Javadi, "Effects of fusion relevant transient energetic radiation, plasma and thermal load on PLANSEE double forged tungsten samples in a low-energy plasma focus device", Appl. Surf. Sci, 443, pp.311~320 (2018)
- F. Klein, "Sublimation of advanced tungsten alloys under DEMO relevant accidental conditions", Fusion Eng. Des, 146, pp.1198~1202 (2019)
- Pengqi Chen, "Enhanced mechanical properties and interface structure characterization of W-La2O3 alloy designed by an innovative combustion-based approach", Nuclear Engineering and Technology, 53(5), pp.1593~1601 (2021), 한국원자력학회[DOI]
- H. Y. Chen, "Effects of zirconium element on the microstructure and deuterium retention of W-Zr", Sc2O3 composites, 2016, pp.6, 32678~
- X. Zhang, "First-principles calculations on interface stability and migration of H and He in W-ZrC interfaces", Appl. Surf. Sci, 499, pp.143995~ (2020)
- J. H. Chen, "The effect of hot isostatic pressing on thermal conductivity of additively manufactured pure tungsten", Int. J. Refract. Metals Hard Mater, 87, pp.105135~ (2020)
- R. A. Pitts, "Physics basis and design of the ITER plasma-facing components", J. Nucl. Mater, 415, pp.S957~ (2011)[DOI]
- A. R. Raffray, "High heat flux components-Readiness to proceed from near term fusion systems to power plants", Fusion Eng. Des, 85, pp.93~108 (2010)
- D. Nishijima, "Formation mechanism of bubbles and holes on tungsten surface with low-energy and high-flux helium plasma irradiation in NAGDIS-II", J. Nucl. Mater, 329-333, pp.1029~1033 (2004)
- N. Yoshida, "Impact of low energy helium irradiation on plasma facing metals", J. Nucl. Mater, 337-339, pp.946~950 (2005)
- V. K. Alimov, "Hydrogen isotope retention in plasma-facing materials : review of recent experimental results", Phys. Scripta T, 128, pp.6~13 (2007)
- G. H. Lu, "A review of modelling and simulation of hydrogen behaviour in tungsten at different scales", Nucl. Fusion, 54, pp.086001~ (2014)
- Q. Xu, "Investigation of the interaction of He and D in FeBSi alloy", Phil. Mag. Lett, 93, pp.560~565 (2013)
- X. Z. Cao, "Effects of dislocations on thermal helium desorption from nickel and iron", J. Nucl. Mater, 417, pp.1034~1037 (2011)
- H. Kurishita, "Development of re-crystallized W-1. 1%TiC with enhanced room-temperature ductility and radiation performance", J. Nucl. Mater, 398, pp.87~92 (2010)
- J. B. Chen, "Investigation of microstructure and irradiation behavior of W-Nb", Ti composites prepared by spark plasma sintering, 2016, pp.112, 349~354
- M. Battabyal, "Investigation of microstructure and microhardness of pure W and W-2Y2O3 materials before and after ionirradiation", Int. J. Refract. Metals Hard Mater, 46, pp.168~172 (2014)
- A. Manhard, "Blister formation on rough and technical tungsten surfaces exposed to deuterium plasma", Nucl. Fusion, 57, pp.126012~ (2017)
- D. Nishijima, "Suppression of blister formation and deuterium retention on tungsten surface due to mechanical polishing and helium pre-exposure", Nucl. Fusion, 45, pp.669~674 (2005)
- K. Wang, "Effects of thickness reduction on recrystallization process of warm-rolled pure tungsten plates at 1350 C", Fusion Eng. Des, 125, pp.521~525 (2017)
- D. G. Liu, "An overview of oxidation-resistant tungsten alloys for nuclear fusion", J. Alloys Compd, 765, pp.299~312 (2018)
- Wei Hang, "Crystallographic orientation effect on the polishing behavior of LiTaO3 single crystal and its correlation with strain rate sensitivity", Ceramics International, 48(6), pp.7766~7777 (2022), Elsevier BV[DOI]
- Q. Xu, "D2 retention behavior and microstructural evolution of W-2wt. %Y2O3 alloy during He-ion irradiation at high temperature", J. Nucl. Mater, 539, pp.152273~ (2020)
- Y. Xu, "Plasma-surface interaction experimental device : PSIEC and its first plasma exposure experiments on bulk tungsten and coatings", Fusion Eng. Des, 164, pp.112198~ (2021)
- R. Sakamoto, "Microstructural evolution induced by low energy hydrogen ion irradiation in tungsten", J. Nucl. Mater, 220-222, pp.819~822 (1995)
- G. Yao, "Deuterium irradiation resistance and relevant mechanism in W-ZrC", Sc2O3 composites prepared by spark plasma sintering, 2020, pp.120, 103215~
- A. Hollingsworth, "Comparative study of deuterium retention and vacancy content of self-ion irradiated tungsten", J. Nucl. Mater, 558, pp.153373~ (2022)
- K. Sato, "Detection of deuterium trapping sites in tungsten by thermal desorption spectroscopy and positron annihilation spectroscopy", Nucl. Mater. Energy, 9, pp.554~559 (2016)
- Y. G. Li, "Ion radiation albedo effect : influence of surface roughness on ion implantation and sputtering of materials", Nucl. Fusion, 57, pp.016038~ (2017)
- C. M. Parish, "Effect of tungsten crystallographic orientation on He-ion-induced surface morphology changes", Acta Mater, 62, pp.173~181 (2014)
- F. S. Liu, "Effect of crystal orientation on low flux helium and hydrogen ion irradiation in polycrystalline tungsten", Nucl. Instrum. Methods Phys. Res. B, 333, pp.120~123 (2014)