Precise dynamic finite element elastic-plastic seismic analysis considering welds for nuclear power plants
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study performed a precise dynamic finite element time history elastic-plastic seismic analysis considering the welds, which have been not considered in design stage, on the nuclear components subjected to severe seismic loadings such as beyond-design basis earthquakes for sustainable nuclear power plants. First, the dynamic finite element elastic-plastic seismic analysis was performed for a general design practice that does not take into account the welds of the pressurizer surge line system, one of safety class I components in nuclear power plants, and then the reference values for the accumulated equivalent plastic strain, equivalent plastic strain, and von Mises effective stress were set. Second, the dynamic finite element elastic-plastic seismic analyses were performed for the case of considering only the mechanical strength over-mismatch of the welds as well as for the case of considering both the strength over-mismatch and welding residual strain. Third, the effects of the strength over-mismatch and welding residual strain were analyzed by comparing the finite element analysis results with the reference values. As a result of the comparison, it was found that not considering the strength over-mismatch may lead to conservative assessment results, whereas not considering the welding residual strain may be non-conservative
Abstract
This study performed a precise dynamic finite element time history elastic-plastic seismic analysis considering the welds, which have been not considered in design stage, on the nuclear components subjected to severe seismic loadings such as beyond-design basis earthquakes for sustainable nuclear power plants. First, the dynamic finite element elastic-plastic seismic analysis was performed for a general design practice that does not take into account the welds of the pressurizer surge line system, one of safety class I components in nuclear power plants, and then the reference values for the accumulated equivalent plastic strain, equivalent plastic strain, and von Mises effective stress were set. Second, the dynamic finite element elastic-plastic seismic analyses were performed for the case of considering only the mechanical strength over-mismatch of the welds as well as for the case of considering both the strength over-mismatch and welding residual strain. Third, the effects of the strength over-mismatch and welding residual strain were analyzed by comparing the finite element analysis results with the reference values. As a result of the comparison, it was found that not considering the strength over-mismatch may lead to conservative assessment results, whereas not considering the welding residual strain may be non-conservative
참고문헌 (28)
- Generic Aging Lessons Learned (GALL) Report e Final Report, "US NRC", ~, pp.NUREG-1801, Rev.2 (2010)
- Fracture of weld including mismatch effect, in: Proceedings of Structural Mechanics in Reactor Technology vol. 16, "P. Hornet", 1~8 (2001)
- ASME B&PV Code, Section III: Rules for Construction of Nuclear Facility Components, "ASME Boiler and Pressure Vessels Code Committee", ~ (2019)
- T. L. Panontin, "The effect of residual stresses on brittle and ductile fracture initiation predicted by micromechanical models", Int. J. Fract, 82, pp.317~333 (1996)
- ASME Boiler and Pressure Vessels Code Committee, "ASME B&PV Code, Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components", ~ (2019)
- Assessment of the Integrity of Structures Containing Defects, British Energy Generation Report, "British Energy", ~ (2001)
- N. R. C. US, "Regulatory guide 1.44: control of the processing and use of stainless steel, Rev 1", ~ (2011)
- N.R.C. US, "Recommendations for Enhancing Reactor Safety in the 21st Century:the Near Term Task Force Review of Insights from", Fukushima Dai-Ichi Accident, ~ (2011)
- I. Nakamura, "Seismic qualification of piping systems by detailed inelastic response analysis: Part 3 - variation in elastic-plastic analysis results on carbon steel pipes from the benchmark analyses and the parametric analysis", Proceedings of ASME PVP (2017)
- T. Watakabe, "Seismic qualification of piping systems by detailed inelastic response analysis:Part 4 e second round benchmark analyses with stainless steel piping component test", Proceedings of ASME PVP 2017 (2017)
- JSME, "Codes for Nuclear Power Generation Facilities e Rules on Design and Construction for Nuclear Power Plant: Alternative Design for Seismic Design of Seismic S Class Steel Piping Based on Elastic-Plastic Response Analysis", NCCC-008, ~ (2019)
- 김종성, "Simplified elastic-plastic analysis procedure for strain-based fatigue assessment of nuclear safety class 1 components under severe seismic loads", Nuclear Engineering and Technology, 52(12), pp.2918~2927 (2020), 한국원자력학회[DOI]
- J. Y. Kim, "An efficient simplified elastic-plastic analysis procedure using engineering formulae for strain-based fatigue assessment of nuclear safety class 1 piping system subjected to severe seismic loads", Int. J. Fatig, 151 (2021)
- Seismic Analysis of Large-Scale Piping Systems for the JNES-NUPEC Ultimate Strength Piping Test Program, "US NRC", ~, pp.NUREG (2008), CR-6983
- Dassault Systems, "ABAQUS Version 6.16, User’s Manuals", ~ (2016)
- ASME Boiler and Pressure Vessels Code Committee, "ASME B&PV Code, Section II, Part D: Properties Materials", ~ (2019)
- G. H. Koo, "Inelastic Material Model for Type 316H", ASME BPV III Colorado Springs Meeting Task Group on Inelastic Analysis Methods (2015)
- "CMTRs for RVI Core Shroud Assembly and Weld Metal", ~
- J. L. Chaboche, "Constitutive equations for cyclic plasticity and cyclic viscoplasticity", Int. J. Plast, 5(3), pp.247~302 (1989)
- M.C. Smith, "A review of the NeT task group 1 residual stress measurement and analysis round robin on a single weld beadon-plate specimen", Int. J. Pres. Ves. Pip, 120-121, pp.93~140 (2014)
- P. Dong, "Recommendations on residual stresses estimate for fitnessfor-service assessment, welding Research Council", WRC Bull, 476 (2003)
- J. W. Kim, "Local mechanical properties of alloy 82", 182 dissimilar weld Joint between SA508 Gr. 1a and F316 SS at RT and 320"C, 2009, pp.384(No. 3), 212~221
- "APR1400 Design Control Document Tier 2, December 2014", APR1400-K-X-FS-14002-NP, Revision 0, ~
- R. E. Spears, "Approach for selection of Rayleigh damping parameters used for time history analysis", J. Pressure Vessel Technol, 134(6) (2012)
- US NRC, "Regulatory Guide 1.61, Damping Values for Seismic Design of Nuclear Power Plants", ~ (2007)