Mesh and turbulence model sensitivity analyses of computational fluid dynamic simulations of a 37M CANDU fuel bundle
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Mesh and turbulence model sensitivity analyses have been performed on computational fluid dynamics simulations executed with Hydra and ANSYS Fluent for a single CANadian Deuterium Uranium (CANDU) 37M nuclear fuel bundle placed within a standard pressure tube. The goal of this work was to perform a methodical analysis to objectively determine an appropriate mesh and to gauge the sensitivity of different turbulence models for CANDU subchannel flow under isothermal conditions. The boundary conditions and material properties are representative of normal operating conditions in a high-powered channel of the Darlington Nuclear Generating Station. Four meshes were generated with ANSYS Workbench Meshing, ranging from 22 to 84 million cells, and analyzed here to determine an appropriate level of mesh resolution and quality. Five turbulence models were compared in the turbulence model sensitivity analysis: standard k ε, RNG k ε, realizable k ε, SST k u, and the Reynolds Stress Model. The intent of this work was to gain confidence in mesh generation and turbulence model selection of a single bundle to inform the decision making of subsequent investigations of an entire fuel channel containing a string of twelve bundles.
Abstract
Mesh and turbulence model sensitivity analyses have been performed on computational fluid dynamics simulations executed with Hydra and ANSYS Fluent for a single CANadian Deuterium Uranium (CANDU) 37M nuclear fuel bundle placed within a standard pressure tube. The goal of this work was to perform a methodical analysis to objectively determine an appropriate mesh and to gauge the sensitivity of different turbulence models for CANDU subchannel flow under isothermal conditions. The boundary conditions and material properties are representative of normal operating conditions in a high-powered channel of the Darlington Nuclear Generating Station. Four meshes were generated with ANSYS Workbench Meshing, ranging from 22 to 84 million cells, and analyzed here to determine an appropriate level of mesh resolution and quality. Five turbulence models were compared in the turbulence model sensitivity analysis: standard k ε, RNG k ε, realizable k ε, SST k u, and the Reynolds Stress Model. The intent of this work was to gain confidence in mesh generation and turbulence model selection of a single bundle to inform the decision making of subsequent investigations of an entire fuel channel containing a string of twelve bundles.
참고문헌 (18)
- A. Catana, "CFD Thermal-hydraulic analysis of a CANDU fuel channel", Nuclear 2009 International Conference on Sustainable Development through Nuclear Research and Education Institute for Nuclear Research (2009)
- F. Abbasian, "Single-phase and two-phase CFD simulations of the coolant flow inside a Bruce", Darlington CANDU flow channel, 2015, ~
- M. H. A. Piro, "Fluid flow investigations within a 37element CANDU fuel bundle supported by magnetic resonance velocimetry and computational fluid dynamics", Int. J. Heat Fluid Flow, 66, pp.27~42 (2017)
- M. Bruschewski, "Fluid flow in a diametrally expanded CANDU fuel channel-Part 1 : experimental study", Nucl. Eng. Des, 357, pp.110~371 (2020)
- M. H. A. Piro, "Fluid flow in a diametrally expanded CANDU fuel channel-part 2 : computational study", Nucl. Eng. Des, 357, pp.110~121 (2020)
- M. H. A. Piro, "Progress in on-going experimental and computational fluid dynamic investigations within a CANDU fuel channel", Nucl. Eng. Des, 299, pp.184~200 (2016)
- ANSYS Inc., "ANSYS Meshing User's Guide" (2019), Canonsburg, PA
- M. A. Christon, "The Hydra tool kit computational fluid dynamic theory manual", Comput. Sci. Int (2017)
- ANSYS Inc., "ANSYS Fluent Theory Guild" (2019), ANSYS Inc
- J. Armstrong, "Post-irradiation Examination of the 37M Fuel Bundle at Chalk River Laboratories (AECL)", 12th International Conference on CANDU Fuel (2013)
- R.D. Page, "Nuclear Power Symposium: CANADIAN REACTOR FUEL", pp.6~9 (1972), Atomic energy of Canada limited
- "SIEMENS Documentation - NX12"[URL]
- J. Frohlich, "Hybrid LES", RANS methods for the simulation of turbulent flows, 2008, pp.44(5), 349~377
- V. Yakhot, "Development of turbulence models for shear flows by a double expansion technique", Phys. Fluid. Fluid Dynam, 4(7) (1992)
- G. I. Taylor, "Statistical theory of turbulence", Proc. Roy. Soc. Lond. Math. Phys. Sci, 151(873), pp.421~444 (1935)
- P. G. Hill, "Tables of Thermodynamic Properties of Heavy Water in S.I. Units", Datasheet AECL 7531, ~ (1981)
- Nuclear Energy Agency, "Organisation for Economic Co-operation and Development, Best Practice Guidelines for the Use of CFD in Nuclear Reactor Safety Application - Revision", NEA, R, pp.2014, ~
- M. Bruschewski, "Commissioning of an MRI test facility for CFD-grade flow experiments in replicas of nuclear fuel assemblies and other reactor components", Nucl. Eng. Des, 375, pp.111080~ (2021)