Electrochemical oxidation of sodium dodecylbenzenesulfonate in Pt anodes with Y2O3 particles
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The electrochemical oxidation process has been widely studied in the field of wastewater treatment for the decomposition of organic materials through oxidation using $OH generated on the anode. Pt anode electrodes with high durability and long-term operability have a low oxygen evolution potential, making them unsuitable for electrochemical oxidation processes. Therefore, to apply Pt electrodes that are suitable for long-term operation and large-scale processes, it is necessary to develop a new method for improving the decomposition rate of organic materials. This study introduces a method to improve the decomposition rate of organic materials when using a Pt anode electrode in the electrochemical oxidation process for the treatment of organic decontamination liquid waste. Electrochemical decomposition tests were performed using sodium dodecylbenzenesulfonate (SDBS) as a representative organic material and a Pt mesh as the anode electrode. Y2O3 particles were introduced into the electrolytic cell to improve the decomposition rate. The decomposition rate significantly improved from 21% to 99%, and the current efficiency also improved. These results can be applied to the electrochemical oxidation process without additional system modification to enhance the decomposition rate and current efficiency.
Abstract
The electrochemical oxidation process has been widely studied in the field of wastewater treatment for the decomposition of organic materials through oxidation using $OH generated on the anode. Pt anode electrodes with high durability and long-term operability have a low oxygen evolution potential, making them unsuitable for electrochemical oxidation processes. Therefore, to apply Pt electrodes that are suitable for long-term operation and large-scale processes, it is necessary to develop a new method for improving the decomposition rate of organic materials. This study introduces a method to improve the decomposition rate of organic materials when using a Pt anode electrode in the electrochemical oxidation process for the treatment of organic decontamination liquid waste. Electrochemical decomposition tests were performed using sodium dodecylbenzenesulfonate (SDBS) as a representative organic material and a Pt mesh as the anode electrode. Y2O3 particles were introduced into the electrolytic cell to improve the decomposition rate. The decomposition rate significantly improved from 21% to 99%, and the current efficiency also improved. These results can be applied to the electrochemical oxidation process without additional system modification to enhance the decomposition rate and current efficiency.
참고문헌 (22)
- H. W. Seo, "Proposal for the spent nuclear fuel management plan from the decommissioning of Kori site NPPs", Ann. Nucl. Energy, 120, pp.749~762 (2018)[DOI]
- 문제권, "The Status and Prospect of Decommissioning Technology Development at KAERI", Journal of Nuclear Fuel Cycle and Waste Technology, 17(2), pp.139~165 (2019), 한국방사성폐기물학회[DOI]
- A. Anglada, "Contributions of electrochemical oxidation to waste-water treatment : fundamentals and review of applications", J. Chem. Technol. Biotechnol, 84, pp.1747~1755 (2009)[DOI]
- I. Sires, "Electrochemical advanced oxidation processes : today and tomorrow. A review", Environ. Sci. Pollut. Res. Int, 21, pp.8336~8367 (2014)[DOI]
- C. A. Martínez-Huitle, "Single and coupled electrochemical processes and reactors for the abatement of organic water pollutants : a critical review", Chem. Rev, 115, pp.13362~13407 (2015)[DOI]
- B. Louhichi, "Electrochemical degradation of an anionic surfactant on boron-doped diamond anodes", J. Hazard Mater, 158, pp.430~437 (2008)[DOI]
- T. Ochiai, "Efficient electrochemical decomposition of perfluorocarboxylic acids by the use of a boron-doped diamond electrode", Diam. Relat. Mater, 20, pp.64~67 (2011)[DOI]
- G. Loos, "Electrochemical oxidation of key pharmaceuticals using a boron doped diamond electrode", Separ. Purif. Technol, 195, pp.184~191 (2018)[DOI]
- R. N. Goyal, "Electrochemical oxidation of 20,30-dideoxyadenosine at pyrolytic graphite electrode", Electrochim. Acta, 53, pp.5354~5360 (2008)[DOI]
- D. Shao, "Electrochemical oxidation of lignin by two typical electrodes : Ti", SbSnO2 and Ti, Chem. Eng. J, pp.2014, 244[DOI]
- S. Chen, "Co", Sm-modified Ti, Chemosphere, pp.2021, 268[DOI]
- H. Han, "Fabrication of BN modified Ti", PbO2 electrodes with tunable hydrophobic characteristics and their electrocatalytic performance, 2020, pp.828, ~
- T. E. S. Santos, "The influence of the synthesis method of Ti", RuO2 electrodes on their stability and catalytic activity for electrochemical oxidation of the pesticide carbaryl, 2014, pp.148, 39~47
- A. Alaoui, "Activity of Pt", MnO2electrode in the electrochemical degradation of methylene blue in aqueous solution, 2015, pp.154, 281~289
- T. Wu, "Distinctive tin dioxide anode fabricated by pulse electrodeposition : high oxygen evolution potential and efficient electrochemical degradation of fluorobenzene", J. Phys. Chem. C, 115, pp.3888~3898 (2011)[DOI]
- S. B. Hall, "Electrochemical oxidation of hydrogen peroxide at platinum electrodes", Part V: inhibition by chloride, Acta, 45, pp.3573~3579 (2000)[DOI]
- C. Zhou, "Electrochemical degradation of sunscreen agent benzophenone-3 and its metabolite by Ti", SnO2-Sb, Sci. Total Environ, pp.2019, 688[DOI]
- J. Kim, "Removal of sodium dodecylbenzenesulfonate by macroporous adsorbent resins", Materials, 11, pp.1324~ (2018)[DOI]
- Y. Katayama, "Electrochemical oxidation of ammonia over rare earth oxide modified platinum catalysts", J. Phys. Chem. C, 119, pp.9134~9141 (2015)[DOI]
- C. Zhang, "Three-dimensional electrochemical process for wastewater treatment : a general review", Chem. Eng. J, 228, pp.455~467 (2013)[DOI]
- J. Cheng, "Review on the applications and development of fluidized bed electrodes", J. Solid State Electrochem, 24, pp.2199~2217 (2020)[DOI]
- A. Takayanagi, "Removal of anionic surfactant sodium dodecyl benzene sulfonate(SDBS)from wastewaters by zero-valent iron(ZVI) : predominant removal mechanism for effective SDBS removal", Environ. Sci. Pollut. Res, 24, pp.8087~8097 (2017)[DOI]