Fixed neutron absorbers for improved nuclear safety and better economics in nuclear fuel storage, transport and disposal
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Current designs of both large reactor units and small modular reactors utilize a nuclear fuel with increasing enrichment. This increasing demand for better nuclear fuel utilization is a challenge for nuclear fuel handling facilities. The operation with higher enriched fuels leads to reduced reserves to legislative and safety criticality limits of spent fuel transport, storage and final disposal facilities. Design changes in these facilities are restricted due to a boron content in steel and aluminum alloys that are limited by rolling, extrusion, welding and other manufacturing processes. One possible solution for spent fuel pools and casks is the burnup credit method that allows decreasing very high safety margins associated with the fresh fuel assumption in spent fuel facilities. This solution can be supplemented or replaced by an alternative solution based on placing the neutron absorber material directly into the fuel assembly, where its efficiency is higher than between fuel assemblies. A neutron absorber permanently fixed in guide tubes decreases system reactivity more efficiently than absorber sheets between the fuel assemblies. The paper summarizes possibilities of fixed neutron absorbers for various nuclear fuel and fuel handling facilities. Moreover, an absorber material was optimized to propose alternative options to boron. Multiple effective absorbers that do not require steel or aluminum alloy compatibility are discussed because fixed absorbers are placed inside zirconium or steel cladding
Abstract
Current designs of both large reactor units and small modular reactors utilize a nuclear fuel with increasing enrichment. This increasing demand for better nuclear fuel utilization is a challenge for nuclear fuel handling facilities. The operation with higher enriched fuels leads to reduced reserves to legislative and safety criticality limits of spent fuel transport, storage and final disposal facilities. Design changes in these facilities are restricted due to a boron content in steel and aluminum alloys that are limited by rolling, extrusion, welding and other manufacturing processes. One possible solution for spent fuel pools and casks is the burnup credit method that allows decreasing very high safety margins associated with the fresh fuel assumption in spent fuel facilities. This solution can be supplemented or replaced by an alternative solution based on placing the neutron absorber material directly into the fuel assembly, where its efficiency is higher than between fuel assemblies. A neutron absorber permanently fixed in guide tubes decreases system reactivity more efficiently than absorber sheets between the fuel assemblies. The paper summarizes possibilities of fixed neutron absorbers for various nuclear fuel and fuel handling facilities. Moreover, an absorber material was optimized to propose alternative options to boron. Multiple effective absorbers that do not require steel or aluminum alloy compatibility are discussed because fixed absorbers are placed inside zirconium or steel cladding
참고문헌 (22)
- J. Abenojar, "Optimization of processing parameters for the Alþ10% B4C system obtained by mechanical alloying", Journal of Materials Processing Technology, 184, pp.441~446 (2007)
- J. C. Wagner, "Investigation of the effect of fixed absorbers on the reactivity of PWR spent nuclear fuel for burnup credit", Nuclear Technology, 139(16), pp.91~ (2002)
- "Control assembly materials for water reactors: experience, performance and perspectives", Proceedings of a Technical Committee Meeting Held in Vienna (1998)
- Computational Benchmark for Estimation of Reactivity Margin from Fission Products and Minor Actinides in PWR Burnup Credit, "J. C. Wagner", ~, pp.NUREG (2001), CR-6747
- J. Leppanen, "The Serpent Monte Carlo code: status, development and applications in 2013", Annals of Nuclear Energy, 82, pp.142~150 (2015)
- D. A. Brown, "ENDF", B-VIII.0: the 8th major release of the nuclear reaction data library with CIELO-project cross sections, new standards and thermal scattering data, 2018, pp.148, 1~142
- M. Lovecký, "Neutron absorber concept in spent fuel casks aiming at improved nuclear safety and better economics", Proceedings of the 19th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2019) (2019)
- M. Lovecký, "Criticality safety analysis of GBC-32 spent fuel cask with improved neutron absorber concept", Proceeding of PHYSOR 2020 (2020)
- J. Zavorka, "New neutron absorber in spent fuel casks aiming at improved nuclear safety and better economics", Proceedings of ICAPP 2021 (2021)
- R.W. Borchardt, "Burnup Credit in the Criticality Safety Analyses of PWR Spent Fuel in Transportation and Storage Casks", Interim Staff Guidance 8 Revision 3, US NRC, SFST-ISG-8 Revision 3, ~ (2012)
- L. Jutier, "Burnup credit implementation for PWR UOX used fuel assemblies in France : from study to practical experience", Nuclear Science and Engineering, 181, pp.105~136 (2015)
- G. Rothwell, "Spent nuclear fuel storage: what are the relationships between size and cost of the alternatives?", Energy Policy, 150, pp.112126~ (2021)
- Cost Estimate for an Away-From-Reactor Generic Interim Storage Facility (GISF) for Spent Nuclear Fuel, "J. Kessler", Electric Power Research Institute. EPRI, 1018722~ (2009)
- J. Zavorka, "Neutron absorber for VVER-1000 storage, transport and final disposal facilities", Proceedings of the International Conference Nuclear Energy for New Europe (2021)
- D. Vlcek, "Residual Heat Power Removal from Spent Nuclear Fuel during Dry and Wet Storage", Master, pp.2018
- J. Zavorka, "Enhanced nuclear safety of spent fuel", Proceedings of ICONE-27 (2019)
- M. Lovecký, "Neutron absorber for VVER-1000final disposal cask", Proceedings of the International Conference Nuclear Energy for New Europe (2020)
- M. Košt’ál, "Absolute determination of power density in the VVER-1000 mock-up on the LR-0 Research Reactor", Applied Radiation and Isotopes, 78, pp.38~45 (2013)
- J. Zavorka, "Calculation and verification of the new neutron absorbers in a well-defined core in LR-0 reactor", Proceedings of the International Conference Nuclear Energy for New Europe (2022)
- J. Zavorka, "The experimental verification of the new neutron absorbers concept", Progress in Nuclear Energy, 157, pp.104572~ (2023)
- M. Lovecký, "Neutron Absorber", Utility Model CZ 34636 U1, Industrial Property Office of the Czech Republic, ~ (2020)
- Z. Ondracek, "Spent Nuclear Fuel Storage and Disposal Equipment", Utility Model CZ 35775 U1, Industrial Property Office of the Czech Republic, ~ (2022)