금속재료의 전기화학적 갈바닉 부식에 미치는 GECM의 영향
Influence of Graphite Epoxy Composite Material on the Electrochemical Galvanic Corrosion of Metals
2
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
Non metallic composite materials, for example, GECM(graphite epoxy composite material) show high specific strength because of low density. These kinds of non metallic composite materials improved the structural effectiveness and operation economics. However, if these materials contacted several metals, corrosion can be arisen since non metallic composite materials have electrical conductivity. This paper dealt with galvanic corrosion between graphite epoxy composite material and several metals. Base on the electrochemical galvanic corrosion test between GECM and metals, corrosion current of carbon steel and aluminium increased with time but corrosion current of stainless steels and titanium decreased and galvanic potential increased. This behavior shows the galvanic corrosion depends upon the presence of passive film. Also, galvanic effect of GECM coupled with ferrous alloys and non-ferrous alloys was lower than that of 100% graphite, which is attributed to lower exposed area of graphite fiber in the GECM than apparent area of the GECM specimen used for the calculation of galvanic current in this work.
Abstract
Non metallic composite materials, for example, GECM(graphite epoxy composite material) show high specific strength because of low density. These kinds of non metallic composite materials improved the structural effectiveness and operation economics. However, if these materials contacted several metals, corrosion can be arisen since non metallic composite materials have electrical conductivity. This paper dealt with galvanic corrosion between graphite epoxy composite material and several metals. Base on the electrochemical galvanic corrosion test between GECM and metals, corrosion current of carbon steel and aluminium increased with time but corrosion current of stainless steels and titanium decreased and galvanic potential increased. This behavior shows the galvanic corrosion depends upon the presence of passive film. Also, galvanic effect of GECM coupled with ferrous alloys and non-ferrous alloys was lower than that of 100% graphite, which is attributed to lower exposed area of graphite fiber in the GECM than apparent area of the GECM specimen used for the calculation of galvanic current in this work.
참고문헌 (15)
- M. G. Fontana, "Corrosion Engineering. 2nd ed", pp.330~ (1978), McGraw-Hill
- 이학열, "금속부식공학", pp.90~ (1997), 연경문화사
- H. H. Uhlig, "Corrosion and Corrosion Control", pp.92~ (1963), Wiley and Sons
- F. Mansfeld, , Corrosion, 30, pp.343~ (1974)
- F. Mansfeld, , Corrosion Science, 15, pp.183~ (1975)
- F. Fellucci, , Corrosion, 47, pp.808~ (1991)
- F. Fellucci, , Corrosion, 48, pp.281~ (1992)
- 이대길, "복합재료역학 및 가공론" (1993), 성안당
- T. J. Reinhart, "Composites", pp.683~ (1987), ASM International
- Composite Motor Cases of Tactical Rockets, "H. V. Gerlach", ~, pp.AIAA-88-3327
- A. K. Munjal, "Use of Fiber-Reinforced Composites in Rocket Motor Industry", SAMPE Quarterly, pp.1~ (1986)
- The Effect of a Seawater Environment on the Galvanic Corrosion Behavior of Graphite, "Epoxy Composites Coupled to Metals", D. M. Aylor, 1992, CDNSWCSME- 92-32
- Contact corrosion between carbon fiber reinforced composite materials and high- strength metals, "G. Mantong", National Air Intelligence Center(China), ~, pp.NAIC-ID(RS)T- 0413-95 (1995)
- Accelrated Corrosion Testing of Graphite, "Epoxy Composites and Aluinum Alloy Mechanically - Fastened Joints", S. D. Thompson, 1985, AFWALTR- 84-3115
- The Effect of a Seawater Environment on the Galvanic Corrosion Behavior of Graphite, "Epoxy Composites Coupled to Metals", D. M. Aylor, 1992, CDNSWCSME- 91[DOI]