Study on the Effect of Surface Finishing Methods on Pitting Corrosion Behavior of 304 Stainless Steel Alloy
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study the effect of different surface finishing techniques on the pitting corrosion behaviour of a commercial 304 stainless steel alloy was investigated. Surface finishing methods were divided into two categories, i.e. mechanical and chemical. Mechanical treatment methods include power tooling such as grinding,emery paper brushing, stainless steel wire brushing and stainless steel shot blasting. Chemical treatment methods include chemical passivation (phosphoric acid, citric acid, nitric acid) and electro-cleaning (phosphoric acid and citric acid). Potentiodynamic polarization experiments were carried out in 3.5 wt. % NaCl solution at room temp. (20 ℃). The results showed that chemical treatment methods improved the corrosion resistance of stainless steel 304, measured in terms of pitting potential (Epit). Corrosion resistance of the specimens was increased in the order of; electro-cleaning > manual passivation > mechanical cleaning. Surface of electro-cleaned specimens was smoother than rest of the surface treatment methods. Chrome content in chemically treated specimens was higher than in mechanically treated specimens as shown by EDX analysis.
Abstract
In this study the effect of different surface finishing techniques on the pitting corrosion behaviour of a commercial 304 stainless steel alloy was investigated. Surface finishing methods were divided into two categories, i.e. mechanical and chemical. Mechanical treatment methods include power tooling such as grinding,emery paper brushing, stainless steel wire brushing and stainless steel shot blasting. Chemical treatment methods include chemical passivation (phosphoric acid, citric acid, nitric acid) and electro-cleaning (phosphoric acid and citric acid). Potentiodynamic polarization experiments were carried out in 3.5 wt. % NaCl solution at room temp. (20 ℃). The results showed that chemical treatment methods improved the corrosion resistance of stainless steel 304, measured in terms of pitting potential (Epit). Corrosion resistance of the specimens was increased in the order of; electro-cleaning > manual passivation > mechanical cleaning. Surface of electro-cleaned specimens was smoother than rest of the surface treatment methods. Chrome content in chemically treated specimens was higher than in mechanically treated specimens as shown by EDX analysis.
참고문헌 (19)
- A.H. Tuthill, "Specifiying stainless steel surface treatments (NiDI technical series No 10068)" (1992), The Nickel development institute
- M. Fathi, , Dental Mater., 19 (2003)
- R.M. Kain, "Surface Treatments Affecting the Crevice Corrosion Resistance of Stainless Steels", ISIJ Proc. Int.Conf. Stainless Steels (1991), Iron and Steel Institute of Japan
- A. Ben Rhouma, "Effects of Surface Preparation on Pitting Resistance", Journal of Materials Engineering and Performance, 10 (2001)
- C-O.A. Olsson, "An AES and XPS study of the high alloyed austenitic stainless steel 254 SMO tested in a ferric chloride solution", Corr. Sci., 36 (1994)
- I. Olefjord, "The influence of nitrogen on the passivation of stainless steels", Corr. Sci., 38, pp.1203~ (1996)
- S. Jin, "ECSA studies of structure and composition of passive film formed on stainless steel by various immersion times in 0.1M sodium chloride solution", Appl. Phys., A, 42 (1987)
- T. Debold, "‘Passivation of stainless steel parts’ in TAPPI", ~ (1988)
- S.J.Lee, "The effects of electropolishing process parameters on corrosion resistance of 316L stainless steel", Journal of Materials Processing Technology, 140 (2003)
- B.V. Hecke, "The mechanical finishing of decorative stainless steel surfaces", The European stainless steel development association, Materials and application series, 6
- M. H. Moayed, "dependence of the Critical Pitting Temperature on surface roughness", Corrosion Science, 45 (2003)
- YuZuo, "Influence of Various Surface Conditions on Pitting Resistance of Stainless Steel Tubes Type EN 1.4404", Corrosion Science, 44 (2002)
- G.T.Burstein, "Surface Roughness and the Metastable Pitting of Stainless Steel in Chloride Solutions", Corrosion (1995)
- "NIDI Reference Book Series No.10 068, Specifying Stainless Steel Surface Treatments", ~
- "NIDI Reference Book Series No.11 026, fabricating stainless steel for water industry", ~
- N. Ben Salah-Rousset, "Role of surface finishing on pitting corrosion of a duplex stainless steel, JMEPEG 5", ~ (1996)
- T. HONG, "The effect of chromium enrichment in the film formed by surface treatments on the corrosion resistance of type 430 stainless steel", Corrosion Science, 38 (1996)
- T. Ogushi, "Corros. Engng (Zairyo-to-Kankyoj 42", ~ (1993)
- T. Ogushi, "Corros. Engng (Zairyo-to-Kankyo) 41", ~ (1992)