동합금의 워터캐비테이션피닝에 의한 내구성과 부식특성 평가
Evaluation of Corrosion and the Anti-Cavitation Characteristics of Cu Alloy by Water Cavitation Peening
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Cu alloy is widely used for marine applications due to its excellent ductility and high resistance for corrosion as wells as cavitation. However, long term exposure of the material to marine environments may result in damages caused by cavitation and corrosion. Water cavitation peening has been introduced in order to improve resistance of Cu alloy to corrosion and cavitation. The technology induces compressive residual stress onto the surface,and thus enhances the fatigue strength and life. In this study, the characteristics of the material were investigated by using water cavitaiton peening technique,and results showed that 2 minutes of water cavitation peening indicated the considerable improvement in hardness. On the other hand, over 10 minutes of water cavitation peening accelerated damages to the surface. In the case of ALBC3, water cavitation peening in the range of 2 to 10 minutes has shown the excellent durability and corrosion resistance while minimizing surface damages.
Abstract
Cu alloy is widely used for marine applications due to its excellent ductility and high resistance for corrosion as wells as cavitation. However, long term exposure of the material to marine environments may result in damages caused by cavitation and corrosion. Water cavitation peening has been introduced in order to improve resistance of Cu alloy to corrosion and cavitation. The technology induces compressive residual stress onto the surface,and thus enhances the fatigue strength and life. In this study, the characteristics of the material were investigated by using water cavitaiton peening technique,and results showed that 2 minutes of water cavitation peening indicated the considerable improvement in hardness. On the other hand, over 10 minutes of water cavitation peening accelerated damages to the surface. In the case of ALBC3, water cavitation peening in the range of 2 to 10 minutes has shown the excellent durability and corrosion resistance while minimizing surface damages.
참고문헌 (15)
- Jae-Ho Hwang, , J. Corros. Sci. Soc. of Kor, 25, pp.317~ (1996)
- 임명환, "해수와 청수환경에서 선박용 원심펌프 임펠러 재료의 캐비테이션 특성", CORROSION SCIENCE AND TECHNOLOGY, 10(6), pp.218~224 (2011), 한국부식방식학회
- A. G. Petersen, , Corrosion, 60, pp.187~ (2004)
- Kyung-Dong Park, , J. Ocean Eng. Tech, 15, pp.93~ (2001)
- 정찬기, "압축잔류응력이 스프링강의 고온환경 피로균열 진전거동에 미치는 영향", 한국해양공학회지, 16(5), pp.73~79 (2002), 한국해양공학회
- F. P. Zimmerli, , Metal Progress, 67, pp.97~ (1952)
- C. A. Rodopoulos, , J. Mat. Eng. Perform, 16, pp.30~ (2007)
- E. Statnikov, , Ultrasonic, 44, pp.533~ (2006)
- C. Horsch, , Microsystem Technologies, 12, pp.691~ (2006)
- A. Kienzler, , International Conference on shot peening, 10, pp.205~ (2008)
- Y. Sekine, , J. Surf. Sci. Tech, 203, pp.2254~ (2009)
- H. Soyama, , Mater. lett, 62, pp.3564~ (2008)
- C. H. Tang, , Mater. sci. Eng, 373, pp.195~ (2004)
- Masazumi Okido, , Transactions Nonferrous Metals Society of China, 19, pp.892~ (2009)
- C. Deslouls, , Electrochim. Acta, 43, pp.1891~ (1998)