ALBC3 합금의 표면 개질을 위한 쇼트피닝 분사거리가 전기화학적 특성에 미치는 영향
Effects of shot peening stand-off distance on electrochemical properties for surface modification of ALBC3 alloy
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In the case of casting materials or ductile materials for marine equipment, it is common to employ a surface modification for achieving cost reduction and improvement in strength. In particular, aluminium bronze ALBC3 exhibits excellent corrosion resistance, and thus widely used for marine application. However, application of the material under high-velocity seawater flow may induce electrochemical corrosion damage and physical damage such as cavitation erosion, leading to shorter service life of equipment. In this study, surface modification was carried out on ALBC3 alloy for different shot peening stand-off distances, and the physical hardness and electrochemical characteristics before and after modification were investigated. The results in each case showed the hardness increase in comparison with non-peened specimen,and the maximum hardness improvement(50 %) was found in 10 cm of shot-peening stand-off distance. It is observed that the electrochemical characteristics were irrelevant to application of shot peening.
Abstract
In the case of casting materials or ductile materials for marine equipment, it is common to employ a surface modification for achieving cost reduction and improvement in strength. In particular, aluminium bronze ALBC3 exhibits excellent corrosion resistance, and thus widely used for marine application. However, application of the material under high-velocity seawater flow may induce electrochemical corrosion damage and physical damage such as cavitation erosion, leading to shorter service life of equipment. In this study, surface modification was carried out on ALBC3 alloy for different shot peening stand-off distances, and the physical hardness and electrochemical characteristics before and after modification were investigated. The results in each case showed the hardness increase in comparison with non-peened specimen,and the maximum hardness improvement(50 %) was found in 10 cm of shot-peening stand-off distance. It is observed that the electrochemical characteristics were irrelevant to application of shot peening.
참고문헌 (11)
- K. D. Park, , J. Ocean Eng. and Tech., 15, pp.93~ (2001)
- W. F. Brown, "ASTM STP 410", ~ (1966)
- H. Aoki, , Proceedings of the 4th International Conference on Shot Peening, pp.513~ (1990)
- K. D. Park, , Proceedings of the KSMPE Conference, pp.378~ (2005)
- 박경동, "현가장치재 SUP-9강의 부식특성에 미치는 압축잔류응력의 영향에 관한 연구", 대한기계학회논문집 A, 29(7), pp.930~937 (2005), 대한기계학회
- H. Wohlfahrt, , Proceedings of the 2nd International Conference on Shot Peening, 1, pp.316~ (1984)
- 김성종, "5052-O 알루미늄 합금의 워터 캐비테이션 피닝 시간에 따른 표면 경화와 부식 특성에 관한 연구", CORROSION SCIENCE AND TECHNOLOGY, 11(4), pp.151~156 (2012), 한국부식방식학회
- K. J. Kim, , Corros. Sci. Tech., 23, pp.194~ (1994)
- 민성기, "전기화학적 부동태화에 의한 동관의 내식성 개선 연구", CORROSION SCIENCE AND TECHNOLOGY, 10(4), pp.125~130 (2011), 한국부식방식학회
- H. S. Lee, , Corros. Sci, 51, pp.2826~ (2009)
- 홍성모, "화염급냉 표면처리된 Cu0aAl-4.5Ni-4.5Fe 합금의 b' 마르텐사이트 형성에 의한 케비테이션 침식 저항성 향상에 관한 연구", 한국표면공학회지, 37(4), pp.234~ (2004), 한국표면공학회