Corrosion Behaviors of Structural Materialsin High Temperature S-CO₂Environments
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The isothermal corrosion tests of several types of stainless steels, Ni-based alloys, and ferritic-martensiticsteels (FMS) were carried out at the temperature of 550 and 650℃ in SFR S-CO2 environment (200 bar)for 1000 h. The weight gain was greater in the order of FMSs, stainless steels, and Ni-based alloys. Forthe FMSs (Fe-based with low Cr content), a thick outer Fe oxide, a middle (Fe,Cr)-rich oxide, and aninner (Cr,Fe)-rich oxide were formed. They showed significant weight gains at both 550 and 650℃. Inthe case of austenitic stainless steels (Fe-based) such as SS 316H and 316LN (18 wt.% Cr), the corrosionresistance was dependent on test temperatures except SS 310S (25 wt.% Cr). After corrosion test at 650℃, a large increase in weight gain was observed with the formation of outer thick Fe oxide and inner(Cr,Fe)-rich oxide. However, at 550℃, a thin Cr-rich oxide was mainly developed along with partiallydistributed small and nodular shaped Fe oxides. Meanwhile, for the Ni-based alloys (16-28 wt.% Cr), avery thin Cr-rich oxide was developed at both test temperatures. The superior corrosion resistance of highCr or Ni-based alloys in the high temperature S-CO2 environment was attributed to the formation of thinCr-rich oxide on the surface of the materials.
Abstract
The isothermal corrosion tests of several types of stainless steels, Ni-based alloys, and ferritic-martensiticsteels (FMS) were carried out at the temperature of 550 and 650℃ in SFR S-CO2 environment (200 bar)for 1000 h. The weight gain was greater in the order of FMSs, stainless steels, and Ni-based alloys. Forthe FMSs (Fe-based with low Cr content), a thick outer Fe oxide, a middle (Fe,Cr)-rich oxide, and aninner (Cr,Fe)-rich oxide were formed. They showed significant weight gains at both 550 and 650℃. Inthe case of austenitic stainless steels (Fe-based) such as SS 316H and 316LN (18 wt.% Cr), the corrosionresistance was dependent on test temperatures except SS 310S (25 wt.% Cr). After corrosion test at 650℃, a large increase in weight gain was observed with the formation of outer thick Fe oxide and inner(Cr,Fe)-rich oxide. However, at 550℃, a thin Cr-rich oxide was mainly developed along with partiallydistributed small and nodular shaped Fe oxides. Meanwhile, for the Ni-based alloys (16-28 wt.% Cr), avery thin Cr-rich oxide was developed at both test temperatures. The superior corrosion resistance of highCr or Ni-based alloys in the high temperature S-CO2 environment was attributed to the formation of thinCr-rich oxide on the surface of the materials.
참고문헌 (9)
- "Y. I. Chang", Argonne National Laboratory, ~, pp.report ANL-ABR-1 (ANL-AFCL-173) (2006)
- "V. Dostal M.J. Driscoll", MIT Annual and Progress Reports, ~, pp.MIT-ANP-TR-100 (2004)
- D. J. Beech, , OECD Proceedings, the First Information Exchange Meeting on Basic Studies on High-Temperature Engineering (1999)
- G. Cao, , Corros. Sci, 60, pp.246~ (2012)
- K. Sridharan, , Supercritical CO2 Power Cycle Symposium, May 24-25 (2011)
- F. Rouillard, , Supercritical CO2 Power Cycle Symposium, April 29-30 (2009)
- T. Furukawa, , Progress in Nuclear Energy, 53, pp.1050~ (2011)
- S. Kihara, , Materials and Corrosion, 39, pp.69~ (1988)
- "M. Anderson", University of Wisconsin, ~, pp.Report of Nuclear Energy University Program 09-778 (2012)