수소연료전지 자동차의 수소밸브용 알루미늄 합금의 저변형율인장실험에 의한 수소취화특성 연구

키워드

참고문헌 (29)

1. Richard York, "Do alternative energy sources displace fossil fuels?", Nature Climate Change, 2(6), pp.441~443 (2012), Springer Science and Business Media LLC[DOI]
2. Shashi Sharma, "Significance of Hydrogen as Economic and Environmentally Friendly Fuel", Energies, 14(21), pp.7389~ (2021), MDPI AG[DOI]
3. Iain Staffell, "The role of hydrogen and fuel cells in the global energy system", Energy & Environmental Science, 12(2), pp.463~491 (2019), Royal Society of Chemistry (RSC)[DOI]
4. Santanu Kumar Dash, "Hydrogen Fuel for Future Mobility: Challenges and Future Aspects", Sustainability, 14(14), pp.8285~ (2022), MDPI AG[DOI]
5. Ying Wu, "Optimization of Fuel Cell and Supercapacitor for Fuel-Cell Electric Vehicles", IEEE Transactions on Vehicular Technology, 55(6), pp.1748~1755 (2006), Institute of Electrical and Electronics Engineers (IEEE)[DOI]
6. E. Pouillier, "A study of intergranular fracture in an aluminium alloy due to hydrogen embrittlement", International Journal of Plasticity, 34, pp.139~153 (2012), Elsevier BV[DOI]
7. Mahdieh Safyari, "On the role of traps in the microstructural control of environmental hydrogen embrittlement of a 7xxx series aluminum alloy", Journal of Alloys and Compounds, 855, pp.157300~ (2021), Elsevier BV[DOI]
8. Samuel M. Charca, "Hydrogen Transport Conditions and Effects in Cathodically Polarized AF1410 Steel", Metallurgical and Materials Transactions A, 38(10), pp.2389~2399 (2007), Springer Science and Business Media LLC[DOI]
9. Tadakazu Ohnishi, "Effects of Cathodic Hydrogen Charging on the Mechanical Properties of an Al–Li–Cu–Mg–Zr Alloy", Transactions of the Japan Institute of Metals, 29(8), pp.642~649 (1988), Japan Institute of Metals[DOI]
10. M. Hershkovitz, "Stress relaxation in thin aluminium films", Thin Solid Films, 130(1-2), pp.87~93 (1985), Elsevier BV[DOI]
11. Ioannis Chasiotis, "A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy", Experimental Mechanics, 42(1), pp.51~57 (2002), Springer Science and Business Media LLC[DOI]
12. Kyoung Ho So, "Hydrogen Delayed Fracture Properties and Internal Hydrogen Behavior of a Fe–18Mn–1.5Al–0.6C TWIP Steel", ISIJ International, 49(12), pp.1952~1959 (2009), Iron and Steel Institute of Japan[DOI]
13. W. M. Mook, "Compressive stress effects on nanoparticle modulus and fracture", Physical Review B, 75(21), pp.898~ (2007), American Physical Society (APS)[DOI]
14. W.W. Gerberich, "Scale effects for strength, ductility, and toughness in brittle materials", Journal of Materials Research, 24(3), pp.898~906 (2009), Springer Science and Business Media LLC[DOI]
15. Xinfeng Li, "Effect of cathodic hydrogen-charging current density on mechanical properties of prestrained high strength steels", Materials Science and Engineering: A, 641, pp.45~53 (2015), Elsevier BV[DOI]
16. 이승준, "해양 금속재료의 부식속도와 방식전류에 미치는 유속의 영향", CORROSION SCIENCE AND TECHNOLOGY, 14(5), pp.226~231 (2015), 한국부식방식학회[DOI]
17. María de Jesús Gálvez-Vázquez, "Full Model for the Two-Step Polarization Curves of Hydrogen Evolution, Measured on RDEs in Dilute Acid Solutions", The Journal of Physical Chemistry C, 124(7), pp.3988~4000 (2020), American Chemical Society (ACS)[DOI]
18. J. S Kim, "Effects of Heat Treatment on Stress Corrosion Cracking and Hydrogen Embrittlement of Al Alloy for ship", doctor, pp.2010
19. Tomohiro Tsutsumi, "Behavior of Hydrogen in Electrolytically Charged Aluminum", Advanced Materials Research, 409, pp.84~87 (2011), Trans Tech Publications, Ltd.[DOI]
20. Ziyan Zhang, "Hydrogen penetration and diffusion on Mg17Al12 (110) surface: A density functional theory investigation", International Journal of Hydrogen Energy, 42(41), pp.26013~26019 (2017), Elsevier BV[DOI]
21. Samuel M. Charca, "Characterization of Hydrogen Permeation in Armco-Fe during Cathodic Polarization in Aqueous Electrolytic Media", Journal of Materials Engineering and Performance, 17(1), pp.127~133 (2007), Springer Science and Business Media LLC[DOI]
22. V. M. Polyanskii, "Role of hydrogen embrittlement in the corrosion cracking of aluminum alloys", Soviet Materials Science, 21(4), pp.301~309 (1986), Springer Science and Business Media LLC[DOI]
23. Y. Mine, "Fatigue crack growth behavior and hydrogen penetration properties in austenitic stainless steels exposed to high-pressure hydrogen gas environment", Tetsu-To-Hagane, 93, pp.47~ (2007)[DOI]
24. 김성진, "인장응력과 H2S 부식의 복합조건 하에서 고강도 강재의 수소확산 거동 분석을 위한 Numerical 확산모델과 이론적 고찰", CORROSION SCIENCE AND TECHNOLOGY, 18(3), pp.102~109 (2019), 한국부식방식학회[DOI]
25. Jun Song, "Atomic mechanism and prediction of hydrogen embrittlement in iron", Nature Materials, 12(2), pp.145~151 (2012), Springer Science and Business Media LLC[DOI]
26. J. H. Huang, "Internal hydrogen-induced subcritical crack growth in austenitic stainless steels", Metallurgical Transactions A, 22(11), pp.2605~2618 (1991), Springer Science and Business Media LLC[DOI]
27. 김성진, "An Overview on Hydrogen Uptake, Diffusion and Transport Behavior of Ferritic Steel, and Its Susceptibility to Hydrogen Degradation", CORROSION SCIENCE AND TECHNOLOGY, 16(4), pp.209~225 (2017), 한국부식방식학회[DOI]
28. Sandeep Kumar Dwivedi, "Hydrogen embrittlement in different materials: A review", International Journal of Hydrogen Energy, 43(46), pp.21603~21616 (2018), Elsevier BV[DOI]
29. Yingjie Yan, "Hydrogen-induced cracking mechanism of precipitation strengthened austenitic stainless steel weldment", International Journal of Hydrogen Energy, 40(5), pp.2404~2414 (2015), Elsevier BV[DOI]

관련 논문AI추천