Inhibitory Effect of Benzoate-intercalated Hydrotalcite with Ce3+-loaded clay on Carbon Steel
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This work studied the inhibitory effect of the combination of benzoate-intercalated hydrotalcite (HT-BZ) and Ce3+-loaded clay (Clay-Ce) on carbon steel (CS). HT-BZ was prepared by the co-precipitation method and Clay-Ce was fabricated by a cation exchange reaction. HT-BZ and Clay-Ce were assessed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) coupled with zeta potential measurement. Electrochemical measurements coupled with scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX) were used for studying the inhibitory action of the mixture of HT-BZ and Clay-Ce on steel electrodes immersed in 0.1 M NaCl. For comparison, the inhibitory effect of HT-BZ or Clay-Ce alone was also evaluated. The results showed that HT-BZ combined with Clay-Ce provided synergistic inhibition of the CS substrate. The mixture of 0.5 g/L HT-BZ + 0.5 g/L Clay-Ce provided 93.5% inhibition efficiency. The protective mechanism of the HT-BZ + Clay-Ce mixture consisted of the reaction of released BZ and Ce3+ and the deposition of HT-BZ and Clay-Ce structures on the CS substrate.
Abstract
This work studied the inhibitory effect of the combination of benzoate-intercalated hydrotalcite (HT-BZ) and Ce3+-loaded clay (Clay-Ce) on carbon steel (CS). HT-BZ was prepared by the co-precipitation method and Clay-Ce was fabricated by a cation exchange reaction. HT-BZ and Clay-Ce were assessed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) coupled with zeta potential measurement. Electrochemical measurements coupled with scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX) were used for studying the inhibitory action of the mixture of HT-BZ and Clay-Ce on steel electrodes immersed in 0.1 M NaCl. For comparison, the inhibitory effect of HT-BZ or Clay-Ce alone was also evaluated. The results showed that HT-BZ combined with Clay-Ce provided synergistic inhibition of the CS substrate. The mixture of 0.5 g/L HT-BZ + 0.5 g/L Clay-Ce provided 93.5% inhibition efficiency. The protective mechanism of the HT-BZ + Clay-Ce mixture consisted of the reaction of released BZ and Ce3+ and the deposition of HT-BZ and Clay-Ce structures on the CS substrate.
참고문헌 (17)
- Mohammad Tabish, "Improving the corrosion protection ability of epoxy coating using CaAl LDH intercalated with 2-mercaptobenzothiazole as a pigment on steel substrate", Progress in Organic Coatings, 165, pp.106765~ (2022), Elsevier BV[DOI]
- Lisa Garden, "A dielectric study of water uptake in epoxy resin systems", Journal of Applied Polymer Science, 134(16), pp.44717~ (2017), Wiley[DOI]
- Duong Thuy Nguyen, "Corrosion inhibition of carbon steel by hydrotalcites modified with different organic carboxylic acids for organic coatings", Progress in Organic Coatings, 124, pp.256~266 (2018), Elsevier BV[DOI]
- Duong Nguyen Thuy, "Corrosion protection of carbon steel by solvent free epoxy coating containing hydrotalcites intercalated with different organic corrosion inhibitors", Progress in Organic Coatings, 101, pp.331~341 (2016), Elsevier BV[DOI]
- Deepak Dwivedi, "Carbon steel corrosion: a review of key surface properties and characterization methods", RSC Advances, 7(8), pp.4580~4610 (2017), Royal Society of Chemistry (RSC)[DOI]
- Bo Wu, "Study on the affinity sequence between inhibitor ions and chloride ions in Mg Al layer double hydroxides and their effects on corrosion protection for carbon steel", Applied Clay Science, 180, pp.105181~ (2019), Elsevier BV[DOI]
- J. Rodriguez, "Incorporation of layered double hydroxides modified with benzotriazole into an epoxy resin for the corrosion protection of Zn-Mg coated steel", Progress in Organic Coatings, 149, pp.105894~ (2020), Elsevier BV[DOI]
- Thuy Duong Nguyen, "Molybdate intercalated hydrotalcite", graphene oxide composite as corrosion inhibitor for carbon steel, 2020, pp.399, 126165~[DOI]
- G.J. Ayemi, "Synergy effect between layer double hydroxide (LDH) and EDDS for corrosion inhibition of carbon steel", Applied Clay Science, 222, pp.106497~ (2022), Elsevier BV[DOI]
- Huajie Yan, "Preparation and inhibition properties of molybdate intercalated ZnAlCe layered double hydroxide", Journal of Alloys and Compounds, 678, pp.171~178 (2016), Elsevier BV[DOI]
- Thu Thuy Thai, "Hybrid sol–gel coatings doped with cerium nanocontainers for active corrosion protection of AA2024", Progress in Organic Coatings, 138, pp.105428~ (2020), Elsevier BV[DOI]
- Sajjad Akbarzadeh, "Improvement of the corrosion performance of AA2024 alloy by a duplex PEO", clay modified sol-gel nanocomposite coating, 2022, pp.434, 128168~[DOI]
- Suprakas Sinha Ray, "Polymer", layered silicate nanocomposites: a review from preparation to processing, 2003, pp.28(11), 1539~1641[DOI]
- To Thi Xuan Hang, "Corrosion protection mechanisms of carbon steel by an epoxy resin containing indole-3 butyric acid modified clay", Progress in Organic Coatings, 69(4), pp.410~416 (2010), Elsevier BV[DOI]
- Trinh Anh Truc, "8-hydroxyquinoline-modified clay incorporated in an epoxy coating for the corrosion protection of carbon steel", Surfaces and Interfaces, 14, pp.26~33 (2019), Elsevier BV[DOI]
- Trinh Anh Truc, "Incorporation of an indole-3 butyric acid modified clay in epoxy resin for corrosion protection of carbon steel", Surface and Coatings Technology, 202(20), pp.4945~4951 (2008), Elsevier BV[DOI]
- Y. Morozov, "Epoxy coatings modified with a new cerium phosphate inhibitor for smart corrosion protection of steel", Corrosion Science, 159, pp.108128~ (2019), Elsevier BV[DOI]