하중변화에 따른 GF/PUR 복합재료의 연삭마모특성
Effect of load upon the abrasive wear characteristics of glass fiber reinforced polyurethane composites
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The effect of load and sliding speed on abrasive wear characteristics of glass fiber/polyurethane (GF/PUR) composites were investigated at ambient temperature by pin-on-disc friction test. The friction coefficient, cumulative wear volume and surface roughness of these materials against SiC abrasive paper were determined experimentally. Experimental results showed that the surface roughness of the GF/PUR composites was increased as applied load was higher in wear test. The cumulative wear volume tended to increase nonlinearly with increase of sliding distance and depended on applied load and sliding speed for these composites. It could be verified by scanning electric microscopy (SEM) photograph of surface tested that major failure mechanisms were lapping layers, ploughing, delamination, deformation of resin and cracking.
Abstract
The effect of load and sliding speed on abrasive wear characteristics of glass fiber/polyurethane (GF/PUR) composites were investigated at ambient temperature by pin-on-disc friction test. The friction coefficient, cumulative wear volume and surface roughness of these materials against SiC abrasive paper were determined experimentally. Experimental results showed that the surface roughness of the GF/PUR composites was increased as applied load was higher in wear test. The cumulative wear volume tended to increase nonlinearly with increase of sliding distance and depended on applied load and sliding speed for these composites. It could be verified by scanning electric microscopy (SEM) photograph of surface tested that major failure mechanisms were lapping layers, ploughing, delamination, deformation of resin and cracking.
참고문헌 (13)
- Chand, N., "Three-body abrasive of short glass fibre polyester composite", Wear, 242(1), pp.38~46 (2000)
- Evans, D.C., "The wear of polymers, Treatise on materials science and technology, 13, ed", pp.85~139 (1979), Academic Press
- Friedrich, K., "Friction and wear of polymer composites. Composite materials series, 1, ed", pp.233~287 (1986), Elsevier
- Giltrow, J.P., "The role of the counterface in the friction and wear of carbon fibre reinforced thermosetting resins", Wear, 16(5), pp.359~374 (1970)
- 김시영, "구리 나노 입자가 함침된 PTFE의 윤활 마모 거동", 한국동력기계공학회지, 14(4), pp.50~55 (2010), 한국동력기계공학회
- 고성위, "탄소 섬유 복합재의 마찰 및 마모 특성에 미치는 하중 효과", 한국어업기술학회지, 40(4), pp.337~343 (2004), 한국어업기술학회
- 고성위, "탄소 섬유 강화 고분자 복합재의 연삭마모 특성에 관한 연구", 한국동력기계공학회지, 10(1), pp.46~51 (2006), 한국동력기계공학회
- 김병탁, "FRP 선박 외판재의 연삭마모 특성에 관한 연구", 한국어업기술학회지, 44(3), pp.250~256 (2008), 한국어업기술학회
- Ravikiran, A., "Effect of contact pressure and load on wear of alumina", Wear, 251(1), pp.980~984 (2001)
- Ren, H.R., "Tribological evaluation of dental composite resins containing prepolymerized particle fillers", KSME International Journal, 15(6), pp.727~734 (2001)
- Shim, H.H., "Effects of structure and humidity on friction and wear properties of carbon fiber reinforced Epoxy composites", Proc. SPE ANTEC′91, pp.1977~ (1991)
- Sung N., "Effect of fiber orientation in friction and wear of fiber reinforced polymer composites", Wear, 53(1), pp.129~141 (1979)
- Suh, N.P., "The genesis of friction", Wear, 69(1), pp.91~114 (1981)