수치해석기법에 의한 어구 저항 분석 및 저탄소 트롤어구 설계와 비용 분석
Low-Carbon trawl design with analysis of a gear drags and calculation of construction costs using numerical methods
1
조회
0
다운로드
12
인용
0
참고문헌
키워드
초록
Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. This research will helpful to reduce the CO2 emissions from fishing operations and lead to reduce fishing costs due to fuel savings.
Abstract
Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. This research will helpful to reduce the CO2 emissions from fishing operations and lead to reduce fishing costs due to fuel savings.
참고문헌 (21)
- Aanondsen, S.A., "Life cycle assessments of environmental performance used as a tool in ship design (In Norwegian: Livslf psanalyser for beregning av miljfpåvirkning brukt som verktfy ved prosjektering av skip)", pp.56~ (1997), Department of Marine Technology, Norwegian University of Science and Technology
- Ellingsen, H., "Environmental impacts of wild caught cod and farmed salmon-a comparison with chicken", Int J Life Cycle Assess, 11(1), pp.60~65 (2006)
- Fredheim, A., "Hydroelastic analysis of a fishing net in steady inflow conditions", pp.1~10 (2003), Hydroelastic in Marine Technology
- Gere, J.M., "Mechanics of materials. 7thed", pp.68~71 (2009), Cengage Learning
- Lee, C.W., "Measurements of midwater trawl system and dynamic characteristics", Bull. Kor. Soc. Fish. Tech, 34(3), pp.294~301 (1998)
- Lee, C.W., "Physical modeling for underwater flexible systems dynamic simulation", Ocean Engineering, 32, pp.331~347 (2005)
- Lee, C.W., "Dynamic simulation of a fish cage system subjected to currents and waves", Ocean Engineering, 35, pp.1521~1532 (2008)
- 이동우, "한국 수산업분야 어업용 연소연료의 사용실태와 CO2배출량의 산정", 한국수산과학회지, 43(1), pp.78~82 (2010), 한국수산과학회
- Lee, J.H., "Experimental investigation and numerical methods in analyzing the ocean current displacement phenomena of longlines", 박사, pp.2009
- Prior, D, "Optimisation of trawl energy efficiency under fishing effort constraint", Proc. Of the 9th International Workshop“DEMa T09” (2009)
- Schau, E.M., "Energy consumption in the Norwegian fisheries", J Cleaner Prod, 17, pp.325~334 (2009)
- Takaki, T., "Validity and layout of“NaLA”: a net configuration and loading analysis system", Fisheries Research, 65, pp.235~243 (2004)
- Thrane, M., "Energy consumption in the Danish fishery: identification of key factors", J Ind Ecol, 8, pp.223~239 (2004)
- regional datasets, 9:3, Vancouver: Fisheries Centre, "Energy consumed by North Atlantic fisheries. Fisheries Centre Research Report, Fisheries impacts on North Atlantic ecosystems: catch, effort and national", pp.2001, Tyedmers, P.
- Tyedmers, P., "Fisheries and energy use, The encyclopedia of energy", pp.2004, Academic Press
- The practical mariner′ s book of knowledge: 420 sea-tested rules of thumb for almost every boating situation, "Vigor, J.", International Marine division of McGraw-Hill, 71~72, pp.ISBN 97－0070674752 (1994)
- Wakaba, L., "On the added mass force at finite Reynolds and acceleration numbers", Journal of Theoretical and Computational Fluid Dynamics, 21, pp.147~153 (2007)
- Manual of methods of measuring the selectivity of towed fishing gears, "Wileman, D.A.", 126~, pp.ICES Cooperative Research Report, No. 215 (1996)
- Wileman, D.A., "Size selectivity and relative fishing power of Baltic cod gillnets", Meddelande från Havsfiskelaboratoriet, 329, pp.110~148 (2000)
- Ziegler, F., "Emissions from fuel combustion in Swedish cod fishery", J Cleaner Prod, 11, pp.303~314 (2003)
- Ziegler, F., "Environmental life cycle assessment of seafood products from capture fisheries", The International Journal of Life Cycle Assessment, 12, pp.61~ (2006)