바닥재의 확산계수 및 분배계수 산정
The Determination of Diffusion and Partition Coefficients of Indoor Bottom Finishing Materials
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The building materials contain high concentration volatile organic compounds (VOCs) and other hazardous pollutants (HAPs). Specially, VOCs discharged by indoor building material cause to new house syndrome, atopic dermatitis etc. The Diffusion coefficient and initial containing TVOC quantity determined using microbalance experiment and small chamber test. Interactions between volatile organic compounds (VOCs) and vinyl flooring (VF), a relatively homogenous, diffusion-controlled building material, were characterized. Rapid determination of the material/air partition coefficient (K) and the material-phase diffusion coefficient (D) for each VOC was achieved by placing thin VF slabs in a dynamic microbalance and subjecting them to controlled sorption/desorption cycles. K and D are shown to be independent of concentration for all of the VOCs and water vapor. This approach can be applied to other diffusion-controlled materials and should facilitate the prediction of their source/sink behavior using physically-based models.
Abstract
The building materials contain high concentration volatile organic compounds (VOCs) and other hazardous pollutants (HAPs). Specially, VOCs discharged by indoor building material cause to new house syndrome, atopic dermatitis etc. The Diffusion coefficient and initial containing TVOC quantity determined using microbalance experiment and small chamber test. Interactions between volatile organic compounds (VOCs) and vinyl flooring (VF), a relatively homogenous, diffusion-controlled building material, were characterized. Rapid determination of the material/air partition coefficient (K) and the material-phase diffusion coefficient (D) for each VOC was achieved by placing thin VF slabs in a dynamic microbalance and subjecting them to controlled sorption/desorption cycles. K and D are shown to be independent of concentration for all of the VOCs and water vapor. This approach can be applied to other diffusion-controlled materials and should facilitate the prediction of their source/sink behavior using physically-based models.
참고문헌 (13)
- Cox, S.S., "'Measuring partition and diffusion coefficients for volatile organic compounds in vinyl flooring'", Atmospheric Environment, 35(22), pp.3823~3830 (2001)
- Crank, J., "The Mathematics of Diffusion" (1995), Oxford University Press
- Minstry of Environment, "'Standard Test Mentods for Indoor Air Qualiy' Seoul", Korea Goverments of Ministry of Environment, 160 (2004)
- Jang, M., "'The Study on Characteristics of VOCs and Formaldehyde Emission rate from Building Materials' The 37th Meeting of KOSAE(2004)", Korean Society for Atmospheric Environment, pp.199~200 (2004)
- 이석조, "소형챔버법을 이용한 건축자재 중 벽지, 페인트 및접착제의 VOCs 방출특성 평가", 한국대기환경학회지, 21(2), pp.191~204 (2005), 한국대기환경학회
- Kim, J.-c., "'Trends and Control Technologies of Volatile Organic Compound'", Journal of Korean Society for Atmospheric Environment, 22(6), pp.743~757 (2006)
- Kim,J.-H., "'Characteristics of TVOCs Emission Factors from Chemical and Natural Coating Materials'", Journal of Korean Society Environmental Health, 30(5), pp.487~493 (2004)
- Kwok, N.H., "'Substrate effects on VOC emissions from an interior finishing vanish'", Building and Environment, 38, pp.1019~1026 (2003)
- Silva, G.V.A., "'The Effect of substrate of volatile organic compounds emissions from a varnish' Indoor air 99", Edinburg Scotland: Indoor Air (1999), Indoor Air
- Yang, X., "'A mass transfer model for simulating volatile organic compound emissions from 'wet' coating materials applied to absorptive substrates'", International Journal of Heat and Mass Transfer, 44(9), pp.1803~1815 (2001)
- Yang, X., "'A mass transfer model for simulating VOC sorption on building materials'", Atmospheric Environment, 35(7), pp.1291~1299 (2001)
- Zhang, J.J., "'Indoor air pollution: a global health concern'", British Medical Bulletin, 68, pp.209~225 (2003)
- Zhang, J.S., "'Sink Characteristics of a Full-Scale Environmental Chamber and Their Impact on Material Emission Testing'", The 1999 Annual Meeting Seattle WA: ASHRAE (1999), 1999