Boron-doped Diamond 전극을 이용한 Rhodamine B와 N, N-Dimethyl-4-nitrosoanilin의 전기화학적 분해에 반응표면분석법의 적용과 공정 최적화
Application of the Response Surface Methodology and Process Optimization to the Electrochemical Degradation of Rhodamine B and N, N-Dimethyl-4-nitrosoanilin Using a Boron-doped Diamond Electrode
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The aim of this research was to apply experimental design methodology to optimization of conditions of electrochemical oxidation of Rhodamine B (RhB) and N, N-Dimethyl-4-nitrosoaniline (RNO, indicative of the OH radical). The reactions of electrochemical oxidation of RhB degradation were mathematically described as a function of the parameters of current (X1), NaCl dosage (X2) and pH (X3) and modeled by the use of the central composite design. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the removal efficiency of RhB and RNO and test variables in a coded unit: RhB removal efficiency (%) = 94.21 + 7.02X1 + 10.94X2 − 16.06X3 + 3.70X1X3 + 9.05X2X3 − 3.46X12− 4.67X22− 7.09X32; RNO removal efficiency (%) = 54.78 + 13.33X1 + 14.93X2 − 16.90X3. The model predictions agreed well with the experimentally observed result. Graphical response surface and contour plots were used to locate the optimum point. The estimated ridge of maximum response and optimal conditions for the RhB degradation using canonical analysis was 100.0% (current, 0.80 A; NaCl dosage, 2.97% and pH 6.37).
Abstract
The aim of this research was to apply experimental design methodology to optimization of conditions of electrochemical oxidation of Rhodamine B (RhB) and N, N-Dimethyl-4-nitrosoaniline (RNO, indicative of the OH radical). The reactions of electrochemical oxidation of RhB degradation were mathematically described as a function of the parameters of current (X1), NaCl dosage (X2) and pH (X3) and modeled by the use of the central composite design. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the removal efficiency of RhB and RNO and test variables in a coded unit: RhB removal efficiency (%) = 94.21 + 7.02X1 + 10.94X2 − 16.06X3 + 3.70X1X3 + 9.05X2X3 − 3.46X12− 4.67X22− 7.09X32; RNO removal efficiency (%) = 54.78 + 13.33X1 + 14.93X2 − 16.90X3. The model predictions agreed well with the experimentally observed result. Graphical response surface and contour plots were used to locate the optimum point. The estimated ridge of maximum response and optimal conditions for the RhB degradation using canonical analysis was 100.0% (current, 0.80 A; NaCl dosage, 2.97% and pH 6.37).
참고문헌 (27)
- Park, Y. S, "펜톤, 펜톤-유사 및 광-펜톤-유사 반응을 이용한 Rhodamine B의 탈색", 한국환경보건학회지, 33(2), pp.150~157 (2007), 한국환경보건학회
- Park,Y.S, "Effect of coagulation,ozone and UV post-process on COD and color removal of textile wastewater", Korean Journal of Environmental Health Society, 27(4), pp.93~98 (2001)
- Socha, A, "Electrochemical and photoelectrochemical treatment of C.I. acid violet 1", Dyes and Pigments, 73, pp.390~393 (2007)
- Lin, S. H, "Kinetic characteristics of textile wastewater ozonation in fluidized and fixed activated carbon beds", Water Research, 34, pp.763~772 (2002)
- Sun,G, "Sunflower stalks as adsorbents for color removal from textile wastewater", Industrial Engineering Chemical Research, 36, pp.808~812 (1997)
- Coast, C. R, "Electrochemical treatment of tannery wastewater using DSA electrodes", Journal of Hazardous Materials, 153, pp.616~627 (2008)
- 김동석, "전기분해와 UV 조사에 의한 수중 Rhodamine B의 제거(Ⅱ)", 한국환경과학회지, 18(6), pp.667~674 (2009), 한국환경과학회
- Panizza, M, "Electrocatalytic materials for the electrochemical oxidation of synthetic dyes", Applied Catalysis B: Environmental, 75, pp.95~101 (2007)
- 박영식, "전기분해와 UV 조사에 의한 수중의 Rhodamine B의 제거(I)", 한국환경보건학회지, 34(6), pp.439~445 (2008), 한국환경보건학회
- Tröster, I, "Electrochemical advanced oxidation process using DiaChem® electrodes", Water Sciences and Technology, 49(4), pp.207~212 (2004)
- Xu, L, "Electrolytic treatment of C.I. Acid Orange 7 in aqueous solution using a three-dimensional electrode reactor", Dyes and Pigments, 77, pp.158~164 (2008)
- 김동석, "전기화학적 공정의 운전인자에 따른 산화제 생성과 염료 분해 특성", 한국환경과학회지, 18(11), pp.1235~1245 (2009), 한국환경과학회
- 박영식, "Ru-흑연 전극을 이용한 Rhodamine B의 색 제거", 한국환경과학회지, 17(5), pp.547~553 (2008), 한국환경과학회
- 김동석, "전기화학적 산화를 이용한 염료 처리에 중심합성설계와 반응표면분석법의 적용", 한국환경과학회지, 18(11), pp.1225~1234 (2009), 한국환경과학회
- Park, D. K, "Design of experiment using Minitab", pp.1~20 (2008)
- Lim, Y. B, "Practical design of experiments", pp.1~15 (2008), Free Academy
- 김동석, "전기응집", 부상 공정을 이용한 염료 처리에 중심합성설계와 반응표면분석법의 적용, 2010, pp.26(1), 35~43[DOI]
- 조일형, "반응표면분석법을 이용한 염색폐수의 광촉매 산화 처리조건의 최적화", 한국물환경학회지, 19(3), pp.257~270 (2003), 한국물환경학회
- Lee, S. H, "Engineering statistics data analysis using Minitab", pp.715~732 (2008), Ire Tech. Inc
- Arslan-Alaton, I, "Treatment of azo dye production wastewaters using photo-Fenton-like advanced oxidation processes: optimization by response surface methodology", Journal of Photochemistry and Photobiology A: Chemistry, 202, pp.142~153 (2009)
- 김동석, "3차원 전극을 사용한 Rhodamine B의 전기분해에 미치는 운전인자의 영향", 한국환경보건학회지, 35(4), pp.295~303 (2009), 한국환경보건학회
- Design-Expert Software, "Version 7.1 User's guide", pp.1~30 (2007)
- 조일형, "Photo-Fenton 산화공정에서 반응표면분석법을 이용한 축산폐수의COD 처리조건 최적화 및 예측식 수립", 대한환경공학회지, 30(6), pp.642~652 (2008), 대한환경공학회
- Kim, D. S, "Disinfection of E. coli using electro-UV complex process: disinfection characteristics and optimization by the design of experiment based on the box-behnken technique" (2010), Journal of the Environmental Sciences
- 송원용, "UV공정을 이용한 NDMA처리 통계적 최적화 연구", 한국물환경학회지, 25(1), pp.96~101 (2009), 한국물환경학회
- Aleboyeh, A, "Optimization of C.I. Acid Red 14 azo dye removes by electrocoagulation batch process with response surface methodology", Chemical Engineering and Processing, 47, pp.827~832 (2008)
- Prasad, R. K, "Electrochemical degradation of distillery spent wash using catalytic anode: factorial design experiments", Chemical Engineering Journal, 146, pp.22~29 (2009)