본문 바로가기
KERD
논문KCI 등재

법랑질 접착에 대한 습윤 효과

Effect of wetness on the enamel bonding

최희영|박병철|조영곤|유상훈|김종욱|진철희|기영재|고근호
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2004.05|Restorative Dentistry and Endodontics|제29권 제3호|pp. 205-211

1

조회

0

다운로드

1

인용

0

참고문헌

주제분류치의학

초록

Abstract

This study evaluated the microleakage and interfacial gap between enamel and composite resin under the dry and wet condition of the enamel surface. V shaped class 5 cavities were prepared on the occlusal portion of extracted human molars. Samples were divided into three groups: D group (air dry for 10-15 s), BD group (blot dry with moist cotton pellet), and DR group (air dry for 10-15 s and rewet with Aqua-Prep F for 20 s). Cavities were filled using Aelitefil composite resin after applied One-Step. Microleakage was tested by 2% methylene blue dye solution and the data were statistically analysed by Kruskal-Wallis test and Mann-Whitney test. Also Enamel-resin interface was observed under SEM. Group BD showed statistically lower microleakage than group D (p < 0.05), but there was no statistically significant difference between group BD and DR (p > 0.05). At the enamel-resin interface, group D showed the gap of 2 ㎛ thickness, but group BD and DR showed close adaptation. In conclusion, the use of blot dry and rewetting agent (Aqua-Prep F) resulted in decreased microleakage and improved adhesion between enamel and resin when using One-step

참고문헌 (30)

  1. "Microleakage of hydrophilic systems in class V composite restorations", 14(1), pp.31~34 (2001)
  2. "Microleakage of adhesive restorative materials", 14(3), pp.170~176 (2001)
  3. "Effects of acid-etching solutions on human enamel and dentin", 26, pp.431~435 (1995)
  4. "Resin bonding to wet substrate Bonding to dentin", pp.39~41 (1992)
  5. "Effect of moist bonding on composite", enamel bond strength, 2002, pp.15(2), 85~70
  6. "Effect of solvent and rewetting time on dentin adhesion", 32, pp.385~390 (2001)
  7. "Enamel and dentin bonding", 12(3), pp.119~201 (2000)
  8. "Adhesion to enamel and dentin Current status and future challenges", 3, pp.215~235 (2003)
  9. "Permeability of dentin to adhesive agents", pp.618~631
  10. "Dentin bond strength after air drying and rewetting", 7(3), pp.144~148 (1994)
  11. "Micromorphological spectrum of acid conditioned dentin following the application of a water-based adhesive", 14, pp.329~338 (1998)
  12. "Comparative microtensile bond strength and SEM analysis of bonding to wet and dry dentin", 13(6), pp.354~328 (2000)
  13. "Shear bond strength to moist and dry dentin of four dentin bonding systems", 13(5), pp.267~270 (2000)
  14. "Solvation of dried dentin matrix by water and other polar solvents", 15, pp.97~102 (2002)
  15. "Effect of resin primer solvents and surface wetness on resin composite bond strength to dentin", 9, pp.161~166 (1996)
  16. "Its effect on shear bond strength", pp.127~129 (1992)
  17. "Effects of different re-wetting techniques on dentin shear bond strengths", 12(2), pp.85~96 (2000)
  18. "The effect of a re-wetting agent on dentin bonding", 15, pp.282~295
  19. "Effect of preliminary treatment of the dentin surface on the shear bond strength of resin composite to dentin", 26, pp.569~575 (2001)
  20. "Resin bonding to wet substrate Bonding to enamel", pp.625~627 (1992)
  21. "Effect of dentin primer on shear bond strength of composite resin to moist and dry enamel", 25, pp.51~56 (2000)
  22. "Interfacial ultrastructure of the enamel", dentin bonding agents, 1998, pp.11, 13~16
  23. "Simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", 28, pp.849~853 (1955)
  24. "Morphological characterization of single bottle adhesives and vital dentin interface", 15(1), pp.31~34 (2002)
  25. "Effecct of resin viscosity and enamel beveling on the clinical performance of class V composite restorationsThree-year Results", 28(5), pp.482~487 (2003)
  26. "Comparing two methods of moisture control in bonding to enamel:A clinical study", pp.130~135
  27. "Effects of two methods of moisture control on marginal microleakage between resin composite and etched enamel", pp.475~479 (1993)
  28. "Effect of a re-wetting agent on the performance of acetone-based dentin adhesives", 11, pp.207~213
  29. "Ultrastructure of the resin-dentin interface following reversible and irreversible rewetting", 10(2), pp.77~82 (1997)
  30. "Resin desensitizers", 11(6), pp.289~290 (1999)

관련 논문AI추천

재습윤제의 적용이 상아질 접착에 미치는 효과박일윤, 이영곤, 조영곤대한치과보존학회 · Restorative Dentistry and Endodontics2003 · 제28권 제1호상아질에 적용된 재 습윤제가 미세인장 결합강도에 미치는 영향강희영, 기영재, 김종욱, 박병철, 유상훈, 조영곤, 진철희, 최희영대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제2호Self-etching adhesive system에서 수분 조절이 레진의 치질접착강도에 미치는 영향김영경, 박정원, 진명욱대한치과보존학회 · Restorative Dentistry and Endodontics2002 · 제27권 제4호공기건조된 상아질에 대한 수분함유 primer의 재습윤효과허복, 김기영, 박정길대한치과보존학회 · Restorative Dentistry and Endodontics2003 · 제28권 제6호법랑질에 대한 total etching과 self-etching 접착제의 산부식 효과와 미세인장결합강도허복, 김현철, 오선경대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제3호상아질 접착제의 성상이 미세인장결합강도에 미치는 영향허복, 김현진, 김현철대한치과보존학회 · Restorative Dentistry and Endodontics2004 · 제29권 제3호

이 간행물의 다른 논문 (9건)

엔진 구동형 니켈 티타늄 파일을 이용한 거터퍼쳐의 제거 효과황호길, 전정훈, 민정범pp. 212-218수종의 미백제가 법랑질에서 복합레진의 미세전단강도에 미치는 영향조경모, 김진우, 장훈상pp. 219-225전기 치수 검사 시 역치 작극 이후 과용(過用)자극 시간의 측정이승종, 남기창, 안선희, 김덕원, 김수찬pp. 226-232복합레진의 지연충전이 미세인장 결합강도에 미치는 영향김종진, 박병철, 김종욱, 최희영, 조영곤, 유상훈, 진철희, 박현식pp. 233-238Local application of NK1 receptor antagonists and pulpal blood flow in cat김영경, 안동국, 추완식, 유현미, 김성교, 이호정pp. 239-248
원문 보기