본문 바로가기
KERD
논문KCI 등재

단량체 및 무기질 filler 조성 변화에 따른 복합레진의 유변학적 특성

Rheological properties of resin composites according to the change of monomer and filler compositions

1

조회

0

다운로드

1

인용

0

참고문헌

주제분류치의학

초록

Abstract

The aim of this study was to investigate the effect of monomer and filler compositions on the rheological properties related to the handling characteristics of resin composites. Resin matrices that Bis-GMA as base monomer was blended with TEGDMA as diluent at various ratio were mixed with the Barium glass (0.7 um and 1.0 um), 0.04 um fumed silica and 0.5 um round silica. All used fillers were silane treated. In order to vary the viscosity of experimental composites, the type and content of incorporated fillers were changed. Using a rheometer, a steady shear test and a dynamic oscillatory shear test were used to evaluate the viscosity ( ) of resin matrix, and the storage shear modulus ( ), the loss shear modulus ( ), the loss tangent (tan) and the complex viscosity ( ) of the composites as a function of frequency  = 0.1-100 rad/s. To investigate the effect of temperature on the viscosity of composites, a temperature sweep test was also undertaken. Resin matrices were Newtonian fluid regardless of diluent concentration and all experimental composites exhibited pseudoplastic behavior with increasing shear rate. The viscosity of composites was exponentially increased with increasing filler volume%. In the same filler volume, the smaller the fillers were used, the higher the viscosities were. The effect of filler size on the viscosity was increased with increasing filler content. Increasing filler content reduced tanδ by increasing the further than the . The viscosity of composites was decreased exponentially with increasing temperature.

참고문헌 (33)

  1. "A characterization of first- generationflowable composites", 129, pp.567~577 (1998)
  2. "A new condensable composite for the restoration ofposterior teeth", 17(2), pp.112~6 (1998)
  3. "A report on a new condensable composite resin", 19(3), pp.230~237 (1998)
  4. "Consistency of resin composites forposterior use", 12, pp.350~354 (1996)
  5. "Viscosity of setting anterior restorativematerials.Brit dent J", 143, pp.393~ (1977)
  6. "Rheology of composite restoratives", 60(9), pp.1678~85 (1981)
  7. "Rheological Properties of flowable,conventional hybrid,and condensable composite resins", 19, pp.298~307 (2003)
  8. "The evaluation of resin composite consistency", 14, pp.424~428 (1998)
  9. "Stickiness prior to setting of some light cured resin composites", 19, pp.182~187 (2003)
  10. "A classification of dental compositesaccording to their morphological and mechanical characteristics", 8, pp.310~319 (1992)
  11. "Viscoelastic and dynamic properties of soft liners and tissue conditioners", 58(8), pp.1801~1807 (1979)
  12. "Viscoelastic properties of silicon", pp.1033~39, and polyether impressionmaterials
  13. "Elastic moduli and visco-elastic relaxation.J Dent", 22, pp.154~158 (1994)
  14. "The rheological properties of dental impression materials.Brit dent J", 151, pp.179~ (1981)
  15. "Viscosity and consistency of impression rubbers", 46(2), pp.429~433 (1967)
  16. "An introduction to rheology" (1989), Elsevier SciencePublishing co
  17. "유변학의 이론과 응용", 3(103), pp.175~191 (2001)
  18. "Relationship between filler and matrix resin characteristics and the properties of uncured composite pastes", 19, pp.197~204 (1998)
  19. "Rheology of urethane dimethacrylate and diluent formulations", 15, pp.257~261 (1999)
  20. "The use of a cone and plate viscometer for determination of flow properties of unfilled resins and etching gels", 16, pp.185~192 (1989)
  21. "Rheological properties of fumed silica filled Bis-GMA dispersions", 38, pp.1142~1148 (1998)
  22. "Effect of filler fraction on strength,viscosity and porosity of experimental compomer materials", 31, pp.373~382 (2003)
  23. "Effects of resin formulation and nanofiller surface treatment on the properties of experimental hybrid resin composite", 25, pp.4065~4071 (2004)
  24. "Shear punch strength and flexural strength of model composies with varying filler volume fraction,particle size and silanation", 19, pp.206~211 (2003)
  25. "Effect of diluent monomer on the physical properties of Bis-GMA based composites", 60, pp.983~989 (1981)
  26. "Influence of UEDMA,BisGMA and TEGDMA on selected mechanical properties of experimental resin composites", 14, pp.51~56 (1998)
  27. "Mechanical properties and filler fraction of dental composites", 5, pp.346~349 (1989)
  28. "Influence of silane treatment and filler fraction on thermal expansion of composite resins", 63, pp.1321~1326 (1984)
  29. "Effect of filler fraction and filler surface treatment on wear of microfilled composites", 18, pp.1~11 (2002)
  30. "Effect of silanation of fillers on their dispersability by monomer systems", 22, pp.183~189 (1995)
  31. "Viscosity of magnetic particle suspension", 75, pp.115~126 (1998)
  32. "The effect of filler and silane content on conversion of resin based composite", 19, pp.327~333 (2003)
  33. "Effect of microfiller fraction and silane treatment on resin composite properties", 40, pp.12~23 (1998)

관련 논문AI추천

이 간행물의 다른 논문 (7건)