치과용 복합레진의 중합 전 slumping resistance와 점탄성
Slumping resistance and viscoelasticity of resin composite pastes
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100, Z250, DenFil, Tetric Ceram, ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 ㎜ thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at 25℃ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the nonslumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G´ but not with the loss tangent. Also, slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.
Abstract
The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100, Z250, DenFil, Tetric Ceram, ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 ㎜ thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at 25℃ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the nonslumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G´ but not with the loss tangent. Also, slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.
참고문헌 (17)
- Al-Sharaa KA, "Stickiness prior to setting of some light cured resin composites", Dent Mater, 19, pp.182~187 (2003)
- Lee IB, "Rheological properties of flowable, conventional hybrid, and condensable composite resins", Dent Mater, 19, pp.298~307 (2003)
- Craig RG, "Restorative dental materials. 11th Ed", pp.91,231~98,251 (2002), Mosby Co
- Bayne SC, "A characterization of first-generation flowable composites", J Am Dent Assoc, 129, pp.567~577 (1998)
- Leinfelder KF, "Packable composites: overview and technical considerations", J Esthet Dent, 11, pp.234~249 (1999)
- Opdam NJM, "Consistency of resin composites for posterior use", Dent Mater, 12, pp.350~354 (1996)
- Lee IB, "The effect of consistency, specimen geometry and adhesion on the linear polymerization shrinkage measurement of light cured composites", Dent Mater, 22, pp.1071~1079 (2006)
- Tyas MJ, "The evaluation of resin composite consistency", Dent Mater, 14, pp.424~428 (1998)
- Barnes HA, "An introduction to rheology. 1st edi", pp.64~73 (1989), Elsevier Science Publishing Co
- "Rheology and its application. 1st edi", pp.3,175~103,191 (2001), The Korean society of rheology
- Summitt JB, "Fundamentals of operative dentistry: A contemporary approach. 3rd Ed", pp.319~323 (2006), Quintessence books
- Jackson RD, "The new posterior resins and a simplified placement technique", JADA, 131, pp.375~383 (2000)
- Lee JH, "Rheological properties of resin composites according to variations in monomer and filler composition", Dent Mater, 22통권 : 6, pp.515~526 (2006)
- Kim SW, "Rheological properties of fumed silica filled Bis-GMA dispersions", Polymer Eng and Sci, 38, pp.1142~1148 (1998)
- Leinfelder KF, "A report on a new condensable composite resin", Compendium, 19(3), pp.230~237 (1998)
- Lee IB, "Rheological characterization of composites using a vertical oscillation rheometer", Dent Mater, 23, pp.425~432 (2006)
- Lee IB, "Slumping resistance and viscoelasticity prior to setting of dental composites", Dent Mater (2008)