본문 바로가기
KERD
논문KCI 등재

레진 인레이 합착시 지각과민처리제의 사용이 상아질 결합강도에 미치는 영향

EFFECT OF A DESENSITIZER ON DENTINAL BOND STRENGTH IN CEMENTATION OF COMPOSITE RESIN INLAY

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류치의학

초록

본 연구는 인레이 와동에서 인상을 채득하기 전 지각과민처리제 (Isodan)과 2단계 전부식 접착시스템 (One-Step)과 단일단계 자가부식 접착시스템 (All-Bond SE)으로 처리한 후, 복합레진 인레이를 자가 접착형 레진시멘트인 BisCem으로 합착시 키는 경우 레진 인레이의 상아질에 대한 미세인장결합강도와 주사현미경적인 분석을 통하여 비교하였다. 본 연구의 결과, 지각과민처리제인 Isodan만을 사용하는 경우 레진 인레이의 결합강도를 감소시킬 수 있으므로 단독 사용보다는 단일 단계 자가부식 시스템 (All-Bond SE)과 같이 사용하는 것이 추천된다.

Abstract

The purpose of this study was to evaluate the effect of a desensitizer on dentinal bond strength in cementation of composite resin inlay. Fifty four molar teeth were exposed the occlusal dentin. Class I inlay cavities were prepared and randomly divided into six groups. Control group ; no agent, Group 1 ; Isodan, Group 2 ; One-step, Group 3 ; All-Bond SE, Group 4 ; Isodan + One-step, Group 5 ; Isodan + All-Bond SE. Desensitizing agent and dentin bonding agents were applied immediately after the completion of the preparations. Impressions were then made. The composite resin inlays (Tescera, Bisco) were fabricated according to the manufacturers' guidelines. Cementation procedures followed a standard protocol by using resin cement (Bis-Cem, Bisco). Specimens were stored in distilled water at 37 ℃ for 24 hours. All specimens were sectioned to obtained sticks with 1.0 × 1.0 mm2 cross sectional area. The microtensile bond strength (μTBS) was tested at crosshead speed of 1 mm/min. The data was analyzed using oneway ANOVA and Tukey's test. Scanning electron microscopy analysis was made to examine the details of the bonding interface. 1. Group 1 showed significantly lower μTBS than other groups (p<0.05). 2. There was no significant difference between the μTBS of Group 3 and Group 5. 3. The μTBS of Group 4 showed significantly lower than that of Group 2 (p<0.05). In conclusion, a desensitizer (Isodan) might have an adverse effect on the bond strength of composite resin inlay to dentin.

참고문헌 (28)

  1. 송미혜, "치과용 접착제가 복합레진 인레이와 레진시멘트의 결합력에 미치는 영향", 대한치과보존학회지, 33(5), pp.419~427 (2008), 대한치과보존학회
  2. 김덕수, "접착레진의 부가도포가 레진 시멘트의 결합강도에 미치는 영향에 대한 연구", 대한치과보존학회지, 32(5), pp.426~436 (2007), 대한치과보존학회
  3. 조민우, "레진시멘트의 접착 내구성에 관한 연구", 대한치과보존학회지, 32(4), pp.343~355 (2007), 대한치과보존학회
  4. Radovic I, "Luting fiber posts with self-adhesive cements: A push-out bond strength test", J Dent Res Appl, 1(1), pp.50~55 (2007)
  5. Abo-Hamar SE, "Bond strength of a new universal selfadhesive resin luting cement to dentin and enamel", Clin Oral Invest, 9, pp.161~167 (2005)
  6. Christensen GJ, "Resin cements and postoperarive sensitivity", JADA, 131, pp.1197~1199 (2000)
  7. Unemori M, "Composite resin restoration and postoperative sensitivity clinical follow-up in an undergraduate program", J Dent, 29, pp.7~13 (2001)
  8. Opdam NJM, "Marginal integrity and postoperative sensitivity in Class 2 resin composite restorations in vivo", J Dent, 26, pp.555~562 (1998)
  9. 조영곤, "상아질 접착 후 저장기간에 따른 접착제의 접착력 변화", 대한치과보존학회지, 30(3), pp.204~214 (2005), 대한치과보존학회
  10. Tay FR, "Aging affects two modes of nanoleakage expression in bonded dentin", J Dent Res, 82(7), pp.537~541 (2003)
  11. Ozturk N, "Dentin bond strengths of two ceramic inlay systems after cementation with three different techniques and one bonding system", J Prosthe Dent, 89, pp.275~281 (2003)
  12. Magne P, "Immediate dentin sealing improves bond strength of indirect restorations", J Prosthe Dent, 94, pp.511~519 (2005)
  13. Magne P, "Immediate dentin sealing supports delayed restoration placement", J Prosthe Dent, 98(3), pp.166~174 (2007)
  14. Primali RJ, "Efficacy of a resin coating on bond strengths of resin cement to dentin", J Esthet Restor Dent, 15(2), pp.105~113 (2003)
  15. Sengun A, "Effect of densensitizers on the bond strength of a self-etching adhesive system to careis-affected dentin on the gingival wall", Oper Dent, 30(4), pp.430~435 (2007)
  16. Omae M, "Effect of a desensitizing agent containing glutaraldehyde and HEMA on bond strength to Er:YAG laser-irradiated dentin", J Dent, 35, pp.398~402 (2007)
  17. Akca T, "Ozgunaltay G", Oper Dent, 32(5), pp.451~456 (2007)
  18. Brackett WW, "The effects of chlorhexidine on dentin hybrid layers In Vivo", Oper Dent, 32(2), pp.107~111 (2007)
  19. Craig RG, "Overview of posterior composite resin for use in clinical practice in Vanherle G Smith DC, in Posterior Composite Resin Dental Restorative Materials", pp.199~211 (1985), 3M Co
  20. Christensen GJ, "Acceptability of alternatives for conservative restoration of posterior teeth", J Esthet Dent, 7, pp.228~232 (1995)
  21. Douglas WH, "A comparison between the microleakage of direct and indirect composite restorative systems", J Dent, 17, pp.184~188 (1989)
  22. "Technical data sheet : Espertise Rely X Unicem (2002) 3M ESPE, Seefeld Germany", ~ (2002)
  23. Suh BI, "New strategies in Adhesive Dentistry : All- Bond 3 and All-Bond SE", J Dent Res Appl, 1(1), pp.2~6 (2007)
  24. Christensen GJ, "Preventing postoperative tooth sensitivity in Class I, II and V restorations", JADA, 133, pp.229~231 (2002)
  25. Paul SJ, "The dual bonding technique : a modified to improve adhesive luting procedures", Int J Periodontics Restorative Dent, 17, pp.536~545 (1997)
  26. Aranha ACC, "Microtensile bond strengths of composite to dentin treated with densensitizer products", J Adhes Dent, 8, pp.85~90 (2006)
  27. Yiu CKY, "Incompatibility of oxalate densensitizers with acidic, fluoride-containing totaletch adhesives", J Dent Res, 84(8), pp.730~735 (2005)
  28. Fu B, "Sealing ability of dentin adhesives", densensitizer, 2007, pp.32(2), 107~111

관련 논문AI추천

이 간행물의 다른 논문 (8건)