접착시스템의 소수성이 Low-shrinkage silorane resin과 상아질의 미세인장강도에 미치는 영향
Effect of adhesive hydrophobicity on microtensile bond strength of low-shrinkage silorane resin to dentin
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
연구목적: 본 연구의 목적은 다양한 소수성을 지닌 최신 상아질 접착시스템과 저수축 silorane 레진의 미세인장결합강도를평가하는 것이다. 연구 재료 및 방법: 36개의 갓 발치된 제3대구치를 이용했다. Low-speed diamond saw를 사용하여 교합면에 평행하게 치관을 잘라 middle dentin을 노출시켰다. 치아를 무작위로 9 group으로 나눴다. Silorane self-etch adhesives (SS), SS +phosphoric acid etching (SS + pa), Adper Easy bond (AE), AE + Silorane system bonding (AE + SSb),Clearfil SE bond (CSE), CSE + SSb, All-Bond 2 (AB2), AB2 + SSb, All-Bond 3 (AB3). 접착제를 적용한 후에Filtek LS (3M ESPE)를 2 mm씩 3회 적층충전하였다. 각 층은 40s씩 광중합하였다. 0.8 mm × 0.8 mm stick을 Micro Tensile Tester로 1 mm/min cross-head speed의 인장력을 가하였다. 파절양상를 관찰하기 위해 광학현미경을 이용하였다. 5가지 접착제의 소수성정도를 결정하기위해 water sorption test하였다. 결과: silorane 레진과 5가지 접착제의 μTBS: SS, 23.2 ± 6.9 MPa; CSE, 19.4 ± 4.4 MPa; AB3, 30.3 ± 4.0 MPa;AB2와 AE, no bond. Additional layering of SSb: CSE + SSb, 26.2 ± 10.3 MPa; AB2 + SSb, 33.9 ± 7.3 MPa;AE + SSb, no bond. 높은 μTBS는 cohesive failure와 관련있었다. SS는 낮은 가장 낮은 water sorption을 보였고 다음으로 AB3, AE, CSE, AB2 순서였다. AE는 가장 높은 용해도를 나타냈고 다음으로 CSE, AB2였다. 결론: 접착제의 소수성이 증가할수록, silorane 레진의 접착강도도 증가하였다. 비전용접착제 위에 silorane adhesive bonding을 layering하는 것은 AB2 + SSb 그룹에서만 결합강도를 유의하게 증가시켰다. AB3는 SS와 유사한 μTBS &water sorption을 나타냈다. 따라서 AB3는 siloran resin을 접착시키는데 SS를 대체할만한 경쟁력있는 접착제이다.
Abstract
Objectives: The purpose of this study was to evaluate μTBS (microtensile bond strength) of current dentin bonding adhesives which have different hydrophobicity with low-shrinkage silorane resin. Materials and Methods: Thirty-six human third molars were used. Middle dentin was exposed. The teeth were randomly assigned to nine experimental groups: Silorane self-etch adhesives (SS), SS + phosphoric acid etching (SS + pa), Adper easy bond (AE), AE + Silorane system bonding (AE + SSb), Clearfil SE bond (CSE), CSE + SSb, All-Bond 2 (AB2), AB2 + SSb, All-Bond 3 (AB3). After adhesive’s were applied, the clinical crowns were restored with Filtek LS (3M ESPE). The 0.8 mm × 0.8 mm sticks were submitted to a tensile load using a Micro Tensile Tester (Bisco Inc.). Water sorption was measured to estimate hydrophobicity adhesives. Results: μTBS of silorane resin to 5 adhesives: SS, 23.2 MPa; CSE, 19.4 MPa; AB3, 30.3 MPa; AB2 and AE, no bond. Additional layering of SSb: CSE + SSb, 26.2 MPa; AB2 + SSb, 33.9 MPa; AE + SSb, no bond. High value of μTBS was related to cohesive failure. SS showed the lowest water sorption. AE showed the highest solubility. Conclusions: The hydrophobicity of adhesive increased, and silorane resin bond-strength was also increased. Additional hydrophobic adhesive layer did not increase the bond-strength to silorane resin except AB2 + SSb. All-Bond 3 showed similar μTBS & water sorption with SS. By these facts, we could reach a conclusion that All-Bond 3 is a competitive adhesive which can replace the Silorane adhesive system. [J Kor Acad Cons Dent 2011;36(4):280-289.]
참고문헌 (29)
- Ernst CP, "Determination of polymerization shrinkage stress by means of a photoelastic investigation", Dent Mater, 20, pp.313~321 (2004)
- Weinmann W, "Siloranes in dental composites", Dent Mater, 21, pp.68~74 (2005)
- Ilie N, "Low-shrinkage composite for dental application", Dent Mater, 26, pp.149~155 (2007)
- Eick JD, "Stability of silorane dental monomers in aqueous systems", J Dent, 34, pp.405~410 (2006)
- Ilie N, "Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites", Dent Mater, 25, pp.810~819 (2009)
- Mine A, "TEM characterizatino of a silorane composite bonded to enamel", dentin, 2010, pp.26, 524~532
- Van Meerbeek B, "Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges", Oper Dent, 28, pp.215~235 (2003)
- Van Landuyt KL, "Monomer-solvent phase separation in one-step self-etch adhesives", J Dent Res, 84, pp.183~188 (2005)
- Ernst CP, "Marginal integrity of class V restorations: SEM versus dye penetration", Dent Mater, 24, pp.319~327 (2008)
- Duarte S Jr, "Nanoleakage, ultramorphological characteristics, and microtensile bond strengths of a new low-shrinkage composite to dentin after artificial aging", Dent Mater, 25, pp.589~600 (2009)
- Della Bona A, "Failure analysis of resin composite bonded to ceramic", Dent Mater, 19, pp.693~699 (2003)
- Ito S, "Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity", Biomaterials, 26, pp.6449~6459 (2005)
- Burrow MF, "Water sorption of several bonding resins", Am J Dent, 12, pp.295~298 (1999)
- Malacarne J, "Water sorption", solubility of dental adhesive resins, 2006, pp.22, 973~980
- Hosaka K, "Relationship between mechanical properties of one-step self-etch adhesives and water sorption", Dent Mater, 26, pp.360~367 (2010)
- Soles CL, "A discussion of the molecular mechanisms of moisture transport in epoxy resins", J Polym Sci, 38, pp.792~802 (2000)
- Vrentas JS, "A free-volume interpretation of the influence of the glass transition on diffusion in amorphous polymers", J Appl Polym Sci, 22, pp.2325~2339 (1978)
- Brazel CS, "Mechanisms of solute and drug transport in relaxing, swellable hydrophilic glassy polymers", Polymer, 40, pp.3383~3398 (1999)
- Brazel CS, "Dimensionless analysis of swelling of hydrophilic glassy polymers with subsequent drug release from relaxing structures", Biomaterials, 20, pp.721~732 (1999)
- Oysaed H, "Water sorption and filler characteristics of composites for use in posterior teeth", J Dent Res, 65, pp.1315~1318 (1986)
- Braden M, "Water absorption characteristics of dental microfine composite filling materials. I. Proprietary materials", Biomaterials, 5, pp.369~372 (1984)
- Meçe A, "Sorption and solubility of luting cements in different solutions", Dent Mater J, 27, pp.702~709 (2008)
- Summitt JB, "Fundamentals of operative dentistry", pp.196~ (2006), Quintessence Publishing Co
- Gre′goire G, "Solvent composition of one-step self-etch adhesives and dentine wettability", J Dent, 39, pp.30~39 (2011)
- Reis A, "Improving clinical retention of one-step self-etching adhesive systems with an additional hydrophobic adhesive layer", J Am Dent Assoc, 140, pp.877~885 (2009)
- Brackett WW, "Microtensile dentin bond strength of self-etching resins: effect of a hydrophobic layer", Oper Dent, 30, pp.733~738 (2005)
- Tay FR, "The overwet phenomenon in two-component acetone-based primers containing aryl amine and carboxylic acid monomers", Dent Mater, 13, pp.118~127 (1997)
- Cho BH, "Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength", Dent Mater, 20, pp.107~115 (2004)
- Sadek FT, "One-year stability of resindentin bonds created with a hydrophobic ethanol-wet bonding technique", Dent mater, 26, pp.380~386 (2010)