열연화주입형 gutta percha와 resilon의 유변학적 특성
Rheological characterization of thermoplasticized injectable gutta percha and resilon
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
연구목적: 본 연구의 목적은 열연화주입형 gutta percha와 resilon의 온도 변화에 따른 점탄성 변화를 관찰하고 조작성을 비교하기 위함이다. 연구 재료 및 방법: Obtura-II 시스템을 이용하여 세 종류의 gutta percha와 resilon을 140℃와 200℃로 가열한 후 사출온도를 측정하였다. 점도계를 이용하여 온도 변화에 따른 재료들의 점탄성 특성(전단탄성계수, G'; 전단점성계수, G"; 손실탄젠트, tan δ; 복소점도, η*)을 관찰하였다. 점도계와 차동주사열측정기(DSC)로 재료들의 상전이 온도를 측정하였고 가압법으로 60℃와 40℃에서 재료들의 점조도를 비교하였다. 결과: 세 종의 gutta perchas는 온도에 따라 서로 다른 점탄성 특성을 나타냈다. 40 - 50℃에서 연화된 재료의 고체화 상변이가 일어났고, 점도계와 DSC로 측정된 상변이 시작 온도는 유사하였다. 상변이 시작 온도와 가압 시 점조도는 재료들마다차이를 보였다(p < 0.05). Resilon은 gutta percha와 비슷한 유변학적 특성을 보였다. 결론: 열연화된 근관충전재는 냉각과정 동안 유변학적 특성의 변화를 나타냈고 재료들마다 서로 다른 점탄성 특성은 근관 내주입 시와 충전 시 서로 다른 조작성을 보임을 알 수 있다.
Abstract
Objectives: The purpose of this study was to observe the change in the viscoelastic properties of thermoplasticized injectable root canal filling materials as a function of temperature and to compare the handling characteristics of these materials. Materials and Methods: Three commercial gutta perchas and Resilon (Pentron Clinical Technologies) in a pellet form were heated in the Obtura-II system (Obtura Spartan) at 140℃ and 200℃, and the extrusion temperature of the thermoplasticized materials was measured. The viscoelastic properties of the materials as a function of temperature were evaluated using a rheometer. The elastic modulus G', viscous modulus G'', loss tangent tan δ, and complex viscosity η* were determined. The phase transition temperature was determined by both the rheometer and a differential scanning calorimeter (DSC). The consistency of the materials was compared under compacting pressure at 60℃ and 40℃ by a squeeze test. Results: The three gutta perchas had dissimilar profiles in viscoelastic properties with varying temperature. The phase transition of softened materials into solidification occurred at 40℃ to 50℃, and the onset temperatures obtained by a rheometer and a DSC were similar to each other. The onset temperature of phase transition and the consistency upon compaction pressure were different among the materials (p <0.05). Resilon had a rheologically similar pattern to the gutta perchas, and was featured between high and low-flow gutta perchas. Conclusions: The rheological characteristics of the thermoplasticized root canal filling materials changed under a cooling process. The dissimilar viscoelastic properties among the materials require different handling characteristics during an injecting and compacting procedure.
참고문헌 (17)
- Miner MR, "A comparison of thermal properties between gutta-percha and a synthetic polymer based root canal filling material (Resilon)", Restorative Dentistry and Endodontics, 32, pp.683~686 (2006), 대한치과보존학회
- Schilder H, "Filling root canals in three dimensions", Dent Clin North Am, 723~744 (1967)
- Karabucak B, "The comparison of gutta-percha and Resilon penetration into lateral canals with different thermoplastic delivery systems", Restorative Dentistry and Endodontics, 34, pp.847~849 (2008), 대한치과보존학회
- Combe EC, "Alpha- and betaforms of gutta-percha in products for root canal filling", Int Endod J, 34, pp.447~451 (2001)
- Elzubair A, "The physical characterization of a thermoplastic polymer for endodontic obturation", J Dent, 34, pp.784~789 (2006)
- Nielsen BA, "Spreader penetration during lateral compaction of resilon and gutta-percha", Restorative Dentistry and Endodontics, 32, pp.52~54 (2006), 대한치과보존학회
- Lee IB, "Rheological characterization of composites using a vertical oscillation rheometer", Dent Mater, 23, pp.425~432 (2007)
- Venturi M, "An ex vivo comparison of three different gutta-percha cones when compacted at different temperatures: rheological considerations in relation to the filling of lateral canals", Int Endod J, 39, pp.648~656 (2006)
- Alicia Karr N, "A comparison of gutta-percha and Resilon in the obturation of lateral grooves and depressions", Restorative Dentistry and Endodontics, 33, pp.749~752 (2007), 대한치과보존학회
- Venturi M, "Temperature change within gutta-percha induced by the System-B Heat Source", Int Endod J, 35, pp.740~746 (2002)
- Tsukada G, "Shear modulus and thermal properties of gutta percha for root canal filling", J Oral Rehabil, 31, pp.1139~1144 (2004)
- Gurgel-Filho ED, "Chemical and X-ray analyses of five brands of dental gutta-percha cone", Int Endod J, 36, pp.302~307 (2003)
- Williams C, "A comparison of cohesive strength and stiffness of Resilon and gutta-percha", Restorative Dentistry and Endodontics, 32, pp.553~555 (2006), 대한치과보존학회
- Gurgel-Filho ED, "Assessment of different gutta-percha brands during the filling of simulated lateral canals", Int Endod J, 39, pp.113~118 (2006)
- Lee JH, "Rheological properties of resin composites according to variations in monomer and filler composition", Dent Mater, 22, pp.515~526 (2006)
- Schilder H, "The thermomechanical properties of gutta-percha. 3. Determination of phase transition temperatures for gutta-percha", Oral Surg Oral Med Oral Pathol, 38, pp.109~114 (1974)
- Kolokuris I, "Thermal analysis of commercial Gutta-percha using differential scanning calorimeter and dynamic mechanical thermal analysis", Restorative Dentistry and Endodontics, 18, pp.4~9 (1992), 대한치과보존학회