Numerical analysis of two and three dimensional buoyancy driven water-exit of a circular cylinder
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
With the development of the technology of underwater moving bodies, the need for developing the know-ledge of surface effect interaction of free surface and underwater moving bodies is increased. Hence, the two-phase flow is a subject which is interesting for many researchers all around the world. In this paper, the non-linear free sur-face deformations which occur during the water-exit of a circular cylinder due to its buoyancy are solved using finite volume discretization based code, and using Volume of Fluid (VOF) scheme for solving two phase flow. Dynamic mesh model is used to simulate dynamic motion of the cylinder. In addition, the effect of cylinder mass in presence of an ex-ternal force is studied. Moreover, the oblique exit and entry of a circular cylinder with two exit angles is simulated. At last, water-exit of a circular cylinder in six degrees of freedom is simulated in 3D using parallel processing. The simula-tion errors of present work (using VOF method) for maximum velocity and height of a circular cylinder are less than the corresponding errors of level set method reported by previous researchers. Oblique exit shows interesting results; formation of waves caused by exit of the cylinder, wave motion in horizontal direction and the air trapped between the waves are observable. In 3D simulation the visualization of water motion on the top surface of the cylinder and the free surface breaking on the front and back faces of the 3D cylinder at the exit phase are observed which cannot be seen in 2D simulation. Comparing the results, 3D simulation shows better agreement with experimental data, specially in the maximum height position of the cylinder.
Abstract
With the development of the technology of underwater moving bodies, the need for developing the know-ledge of surface effect interaction of free surface and underwater moving bodies is increased. Hence, the two-phase flow is a subject which is interesting for many researchers all around the world. In this paper, the non-linear free sur-face deformations which occur during the water-exit of a circular cylinder due to its buoyancy are solved using finite volume discretization based code, and using Volume of Fluid (VOF) scheme for solving two phase flow. Dynamic mesh model is used to simulate dynamic motion of the cylinder. In addition, the effect of cylinder mass in presence of an ex-ternal force is studied. Moreover, the oblique exit and entry of a circular cylinder with two exit angles is simulated. At last, water-exit of a circular cylinder in six degrees of freedom is simulated in 3D using parallel processing. The simula-tion errors of present work (using VOF method) for maximum velocity and height of a circular cylinder are less than the corresponding errors of level set method reported by previous researchers. Oblique exit shows interesting results; formation of waves caused by exit of the cylinder, wave motion in horizontal direction and the air trapped between the waves are observable. In 3D simulation the visualization of water motion on the top surface of the cylinder and the free surface breaking on the front and back faces of the 3D cylinder at the exit phase are observed which cannot be seen in 2D simulation. Comparing the results, 3D simulation shows better agreement with experimental data, specially in the maximum height position of the cylinder.
참고문헌 (24)
- Arai, M., "A computing method for the analysis of water impact of arbitrary shaped bodies", Journal of society of naval architects of Japan, 176, pp.233~240 (1994)
- Acikgoz, N., "Adaptive and dynamic meshing methods for numerical simulations", 박사, pp.2007
- Colicchio, G., "Experimental and numerical investigation of the water-entry and water-exit of a circular cylinder", 24th International Workshop on Water Waves and Floating Bodies (2009)
- Fabula, A. G, "Ellipse fitting approximation of two-dimensional normal symmetric impact of rigid bodies on water", Fifth Midwestern conference on fluid mechanics, University of Michigan, pp.299~315 (1957)
- Gessner, T., "Dynamic mesh adaption for supersonic combustion waves modeled with detailed reaction mechanisms", 박사, pp.2001
- Greco, M., "Bottom slamming for a very large floating structure : coupled global and slamming analyses", Journal of fluids and structures, 25(2), pp.420~430 (2009)
- Non-linear free surface effects experiments and theory, "Greenhow, M.", Massachusetts institute of technology, ~, pp.report No. 83-19 (1983)
- Greenhow, M., "Water entry and exit of horizontal circular cylinders", Philosophical Transactions : Ma-thematical, Physical and Engineering Sciences, 355(1724), pp.551~563 (1997)
- Gorlov, S. I., "Nonlinear problem of a circular cylinder rising vertically to an interface between liquid media", Journal of Applied Mechanics and Technical Physics, 41(2), pp.280~285 (2000)
- Hirt, C.W., "Volume of fluid(VOF)method for the dynamics of free boundaries", Journal of Com-putational Physics, 39(1), pp.201~225 (1981)
- Kleefsman, K.M.T., "An improved volume-of-fluid method for wave impact problems", Procee-dings of OMAE-FPSO, OMAE Speciality Symposium on FPSO Integrity (2004)
- Lin, P., "A numerical water flume for two-dimensional turbulent free surface flows", Journal of Hydraulic Research, 44(1), pp.79~93 (2006)
- Lin, P., "A fixed-grid model for simulation of a moving body in free surface flows", Journal of computers & fluid, 36(3), pp.549~561 (2007)
- Nikseresht, A. H., "Application of volume-of-fluid interface tracking with lagrangian propagation in general curvilinear coordinates on water impact problems", IMEC (2004)
- Solution methods for incompressible viscous free surface flows: A literature review, "Ransau, S. R.", Norwegian University of Science and Technology, ~, pp.Preprint 3 (2002), 2002
- Rastergari, A., "The effect of curvature on the slamming force in water impact of a WIG craft", New Trends in Fluid Mechanics Research, Proceeding of fifth international conference on fluid mechanics, pp.316~319 (2007)
- Schiffermuller, H., "Predictions of external car aerodynamics on distributed memory ma-chines, parallel computational fluid dynamics", Recent developments & advances using parallel computers, pp.505~512 (1998)
- Sheikhalishahi, S. M., "Efficient com-putation of N-S equation with free surface flow around an ACV on shiraz UCFD grid", Advances in Computer Science and Engineering, 6(2009), pp.799~802 (2009)
- Qian, L., "Free-surface capturing method for two fluid flows with moving bodies", Proceedings of the Royal Society: A 2006, 462, pp.21~42 (2005)
- Versteeg, H.K., "An introduction to computational fluid dynamic the finite volume method" (1995), John Wiley & Sons Inc
- Von Karman, T., "The impact on seaplane floats during landing", National Advisory Committee for Aeronautics, ~ (1929)
- Wagner, H., "Landing of sea planes, Issue 622 of Technical memorandums", National Advisory Committee for Aeronautics, ~ (1931)
- Yang, J., "A sharp interface method for two-phase flows interacting with moving bodies", 18th AIAA Computational Fluid Dynamics Conference (2007)
- Zhu, X., "Water entry and exit of a horizontal circular cylinder", Proceedings of OMAE (2005)